component
HT8082ANZ
Public Made by Adomby adom
HTCSEMI Operational Amplifier, DIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHT8082ANZ
HTCSEMI · Operational Amplifier · DIP-8
HT8082ANZ from HTCSEMI, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Output 1 | output | Output of amplifier 1, which is current limited and protected against a direct short to ground. |
| 2 | Inputs 1 - | input | Inverting input of amplifier 1; the input common mode range extends to VEE, and input voltages should stay between VEE and VCC per the maximum ratings. |
| 3 | Inputs 1 (+) | input | Non-inverting input of amplifier 1; common mode input range at 25°C is VEE to (VCC − 1.8 V) with the ±15 V tests. |
| 4 | VEE/GND | power_in | Negative supply rail, or ground for single-supply operation; the total supply VCC + |
| 5 | Inputs 2 (+) | input | Non-inverting input of amplifier 2; the input common mode range extends to VEE. |
| 6 | Inputs 2 (-) | input | Inverting input of amplifier 2; the input common mode range extends to VEE. |
| 7 | Output 2 | output | Output of amplifier 2, which is current limited and protected against a direct short to ground. |
| 8 | VCC | power_in | Positive supply rail; supply range is 3.0 V to 36 V single supply with VCC + |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTCSEMI |
| Package | DIP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage (VCC=+15 V, VEE=-15 V, TA=+25C) | VIO | 0.5 | 3 | mV | RS = 100 Ω, VCM = 0 V, VO = 0 V; VCC = +15 V, VEE = −15 V, TA = +25C | 3 | |
| Input Offset Voltage (VCC=+5.0 V, VEE=0 V, TA=+25C) | VIO | 0.5 | 3 | mV | RS = 100 Ω, VCM = 0 V, VO = 0 V; VCC = +5.0 V, VEE = 0 V, TA = +25C | 3 | |
| Input Offset Voltage (TA = Tlow to Thigh) | VIO | 5 | mV | RS = 100 Ω, VCM = 0 V, VO = 0 V; VCC = +15 V, VEE = −15 V, TA = Tlow to Thigh | 3 | ||
| Input Bias Current (TA = +25C) | IIB | 100 | 500 | nA | VCM = 0 V, VO = 0 V; TA = +25C | 3 | |
| Input Bias Current (TA = Tlow to Thigh) | IIB | 700 | nA | VCM = 0 V, VO = 0 V; TA = Tlow to Thigh | 3 | ||
| Input Offset Current (TA = +25C) | IIO | 6 | 50 | nA | VCM = 0 V, VO = 0 V; TA = +25C | 3 | |
| Input Offset Current (TA = Tlow to Thigh) | IIO | 300 | nA | VCM = 0 V, VO = 0 V; TA = Tlow to Thigh | 3 | ||
| Large Signal Voltage Gain (TA = +25C) | AVOL | 50 | 100 | V/mV | VO = 10 V, RL = 2.0 kΩ; TA = +25C | 3 | |
| Large Signal Voltage Gain (TA = Tlow to Thigh) | AVOL | 25 | V/mV | VO = 10 V, RL = 2.0 kΩ; TA = Tlow to Thigh | 3 | ||
| Output Voltage Swing high (VCC=+5.0 V, VEE=0 V, TA=+25C) | VOH | 3.7 | 4 | V | VID = 1.0 V; VCC = +5.0 V, VEE = 0 V, RL = 2.0 kΩ, TA = +25C | 3 | |
| Output Voltage Swing high (VCC=+15 V, VEE=-15 V, TA=+25C) | VOH | 13.6 | 14 | V | VID = 1.0 V; VCC = +15 V, VEE = −15 V, RL = 10 kΩ, TA = +25C | 3 | |
| Output Voltage Swing high (TA = Tlow to Thigh) | VOH | 13.4 | V | VID = 1.0 V; VCC = +15 V, VEE = −15 V, RL = 2.0 kΩ, TA = Tlow to Thigh | 3 | ||
| Output Voltage Swing low (VCC=+5.0 V, VEE=0 V, TA=+25C) | VOL | 0.1 | 0.3 | V | VID = 1.0 V; VCC = +5.0 V, VEE = 0 V, RL = 2.0 kΩ, TA = +25C | 3 | |
| Output Voltage Swing low (VCC=+15 V, VEE=-15 V, TA=+25C) | VOL | -14.7 | -14.3 | V | VID = 1.0 V; VCC = +15 V, VEE = −15 V, RL = 10 kΩ, TA = +25C | 3 | |
| Output Voltage Swing low (TA = Tlow to Thigh) | VOL | -13.5 | V | VID = 1.0 V; VCC = +15 V, VEE = −15 V, RL = 2.0 kΩ, TA = Tlow to Thigh | 3 | ||
| Output Short Circuit Current, source | ISC | 10 | 30 | mA | VID = 1.0 V, VO = 0 V, TA = 25C | 3 | |
| Output Short Circuit Current, sink | ISC | 20 | 30 | mA | VID = 1.0 V, VO = 0 V, TA = 25C | 3 | |
| Common Mode Rejection | CMR | 80 | 97 | dB | RS ≤ 10 kΩ, VCM = VICR, TA = 25C | 3 | |
| Power Supply Rejection | PSR | 80 | 97 | dB | RS = 100 Ω; VCC/VEE = +16.5 V/−16.5 V to +13.5 V/−13.5 V, TA = 25C | 3 | |
| Power Supply Current per amplifier (VCC=+5.0 V, VEE=0 V, TA=+25C) | ID | 1.6 | 2 | mA | VCC = +5.0 V, VEE = 0 V, VO = +2.5 V, TA = +25C | 3 | |
| Power Supply Current per amplifier (VCC=+15 V, VEE=-15 V, TA=+25C) | ID | 1.9 | 2.5 | mA | VCC = +15 V, VEE = −15 V, VO = 0 V, TA = +25C | 3 | |
| Power Supply Current per amplifier (TA = Tlow to Thigh) | ID | 2.8 | mA | VCC = +15 V, VEE = −15 V, VO = 0 V, TA = Tlow to Thigh | 3 | ||
| Slew Rate (AV = +1.0) | SR | 8 | 10 | V/ms | Vin = −10 V to +10 V, RL = 2.0 kΩ, CL = 500 pF; AV = +1.0 | 4 | |
| Gain Bandwidth Product | GBW | 7.5 | 8.5 | MHz | f = 100 kHz | 4 | |
| Channel Separation | 120 | dB | f = 10 kHz | 4 | |||
| Supply Voltage (from VEE to VCC) | VS | 36 | V | 2 | |||
| Operating Junction Temperature | TJ | 150 | C | 2 | |||
| Storage Temperature Range | Tstg | -60 | 150 | C | 2 | ||
| ESD Capability, Human Body Model | HBM | 2000 | Dual and Quad (Note 3) | 2 | |||
| ESD Capability, Machine Model | ESDMM | 200 | Dual and Quad (Note 3) | 2 | |||
| Ambient Operating Temperature Range | TA | -40 | 85 | C | for all packages | 1 | |
| Single Supply Voltage | 3 | 36 | V | Single supply; VCC+/VEE/ ≤ 36 V | 4 |
CAD (KiCad official)
- Symbol:
HT8082ANZ - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files:
ht8082anz-etched.step/ht8082anz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ht8082anz.step/ht8082anz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HTCSEMI datasheet (19 pp, sha256
fee7f3338815c5cf, retrieved 2026-10-16, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).