main
Ray
Publish 0.1.0
5a311f6
HT7705ANZ
HTCSEMI · Analog To Digital Converters (ADCs) · DIP-16
HT7705ANZ from HTCSEMI, in a DIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SCLK | input | Schmitt-triggered serial clock input used to access serial data from the HT7705, and it may be continuous or non-continuous. |
| 2 | MCLK IN | input | Master clock input that accepts a crystal/resonator across MCLK IN and MCLK OUT or a CMOS-compatible external clock, with operating clock frequencies from 500 kHz to 5 MHz. |
| 3 | MCLK OUT | output | Provides an inverted clock when an external clock drives MCLK IN, is capable of driving one CMOS load, and can be disabled via the CLK DIS bit of the Clock Register. |
| 4 | CS | input | Active-low chip select input that selects the HT7705 and can be hard-wired low for three-wire interface operation. |
| 5 | RESET | input | Active-low input that resets the control logic, interface logic, calibration coefficients, digital filter and analog modulator to power-on status. |
| 6 | AIN2(+) | passive | Positive input of differential analog input Channel 2 on the HT7705 (the HT7706 uses this pin as Analog Input Channel 1). |
| 7 | AIN1(+) | passive | Positive input of differential analog input Channel 1 on the HT7705 (the HT7706 uses this pin as Analog Input Channel 2). |
| 8 | AIN1(-) | passive | Negative input of differential analog input Channel 1 on the HT7705 (the HT7706 uses this pin as the COMMON input to which all analog inputs are referenced). |
| 9 | REF IN(+) | passive | Positive input of the differential reference input, which must be greater than REF IN(-) and can lie anywhere between VDD and GND. |
| 10 | REF IN(-) | passive | Negative input of the differential reference input, which can lie anywhere between VDD and GND provided REF IN(+) is greater than REF IN(-). |
| 11 | AIN2(-) | passive | Negative input of differential analog input Channel 2 on the HT7705 (the HT7706 uses this pin as Analog Input Channel 3). |
| 12 | DRDY | output | Logic output that goes low when a new output word is available in the data register and returns high after a full read or before the next update, also indicating completion of on-chip calibration. |
| 13 | DOUT | output | Serial data output that shifts data out from the output shift register (setup, communications, clock or data register, as selected by the Communications Register). |
| 14 | DIN | input | Serial data input that writes data into the input shift register, which is transferred to the setup, clock or communications register as selected by the Communications Register. |
| 15 | VDD | power_in | Supply voltage input for +2.7 V to +5.25 V operation. |
| 16 | GND | power_in | Ground reference point for the device's internal circuitry. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTCSEMI |
| Package | DIP-16 |
| Category | Data Converters |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD Voltage (2.7 V to 3.3 V range) | VDD | 2.7 | 3.3 | V | For specified performance | 3 | |
| VDD Voltage (4.75 V to 5.25 V range) | VDD | 4.75 | 5.25 | V | For specified performance | 3 | |
| Output Low Voltage | VOL | 0.4 | V | ISINK = 800 µA, VDD = 5 V; except MCLK OUT | 3 | ||
| Output High Voltage | VOH | 4 | V | ISOURCE = 200 µA, VDD = 5 V; except MCLK OUT | 3 | ||
| Floating State Leakage Current | 10 | µA | 3 | ||||
| Power Supply Current, 3 V group: BUF=0, fCLKIN=1 MHz, gains 1 to 128 | IDD | 0.32 | mA | BUF Bit = 0. fCLKIN = 1 MHz. Gains of 1 to 128 | 3 | ||
| Power Supply Current, 3 V group: BUF=1, fCLKIN=1 MHz, gains 1 to 128 | IDD | 0.6 | mA | BUF Bit = 1. fCLKIN = 1 MHz. Gains of 1 to 128 | 3 | ||
| Power Supply Current, 3 V group: BUF=0, fCLKIN=2.4576 MHz, gains 1 to 4 | IDD | 0.4 | mA | BUF Bit = 0. fCLKIN = 2.4576 MHz. Gains of 1 to 4 | 3 | ||
| Power Supply Current, 3 V group: BUF=0, fCLKIN=2.4576 MHz, gains 8 to 128 | IDD | 0.6 | mA | BUF Bit = 0. fCLKIN = 2.4576 MHz. Gains of 8 to 128 | 3 | ||
| Power Supply Current, 3 V group: BUF=1, fCLKIN=2.4576 MHz, gains 1 to 4 | IDD | 0.7 | mA | BUF Bit = 1. fCLKIN = 2.4576 MHz. Gains of 1 to 4 | 3 | ||
| Power Supply Current, 3 V group: BUF=1, fCLKIN=2.4576 MHz, gains 8 to 128 | IDD | 1.1 | mA | BUF Bit = 1. fCLKIN = 2.4576 MHz. Gains of 8 to 128 | 3 | ||
| Power Supply Current, 5 V group: BUF=0, fCLKIN=1 MHz, gains 1 to 128 | IDD | 0.45 | mA | BUF Bit = 0. fCLKIN = 1 MHz. Gains of 1 to 128 | 3 | ||
| Power Supply Current, 5 V group: BUF=1, fCLKIN=1 MHz, gains 1 to 128 | IDD | 0.7 | mA | BUF Bit = 1. fCLKIN = 1 MHz. Gains of 1 to 128 | 3 | ||
| Power Supply Current, 5 V group: BUF=0, fCLKIN=2.4576 MHz, gains 1 to 4 | IDD | 0.6 | mA | BUF Bit = 0. fCLKIN = 2.4576 MHz. Gains of 1 to 4 | 3 | ||
| Power Supply Current, 5 V group: BUF=0, fCLKIN=2.4576 MHz, gains 8 to 128 | IDD | 0.85 | mA | BUF Bit = 0. fCLKIN = 2.4576 MHz. Gains of 8 to 128 | 3 | ||
| Power Supply Current, 5 V group: BUF=1, fCLKIN=2.4576 MHz, gains 1 to 4 | IDD | 0.9 | mA | BUF Bit = 1. fCLKIN = 2.4576 MHz. Gains of 1 to 4 | 3 | ||
| Power Supply Current, 5 V group: BUF=1, fCLKIN=2.4576 MHz, gains 8 to 128 | IDD | 1.3 | mA | BUF Bit = 1. fCLKIN = 2.4576 MHz. Gains of 8 to 128 | 3 | ||
| Standby (Power-Down) Current (5 V column) | 16 | µA | 3 | ||||
| Standby (Power-Down) Current (3 V column) | 8 | µA | 3 | ||||
| Master Clock Frequency fCLKIN (minimum) | fCLKIN | 400 | kHz | Crystal oscillator or externally supplied; for specified performance | 4 | ||
| Master Clock Frequency fCLKIN (maximum) | fCLKIN | 2.5 | MHz | Crystal oscillator or externally supplied; for specified performance | 4 | ||
| RESET Pulsewidth | t2 | 100 | ns | 4 | |||
| VDD to GND | VDD | -0.3 | 7 | V | 5 | ||
| Analog Input Voltage to GND | -0.3 | V | 5 | ||||
| Reference Input Voltage to GND | -0.3 | V | 5 | ||||
| Digital Input Voltage to GND | -0.3 | V | 5 | ||||
| Digital Output Voltage to GND | -0.3 | V | 5 | ||||
| Operating Temperature Range | TA | -40 | 85 | °C | Commercial (B Version) | 5 | |
| Storage Temperature Range | -65 | 150 | °C | 5 | |||
| Junction Temperature | TJ | 150 | °C | 5 | |||
| Power Dissipation, Plastic DIP Package | 450 | mW | Plastic DIP package | 5 | |||
| Lead Temperature, Soldering (10 sec) | 260 | °C | Plastic DIP package, soldering 10 sec | 5 | |||
| ESD Rating | 4000 | V | Printed as >4000 V | 5 | |||
| JA Thermal Impedance, Plastic DIP | θJA | 105 | °C/W | Plastic DIP package | 5 |
CAD (KiCad official)
- Symbol:
HT7705ANZ - Footprint:
Package_DIP:DIP-16_W7.62mm - 3D model: DIP-16 (KiCad packages3D, STEP)
- 3D model files:
ht7705anz-etched.step/ht7705anz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ht7705anz.step/ht7705anz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HTCSEMI datasheet (32 pp, sha256
51e85635652229a8, retrieved 2026-10-26, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HT7705ANZ
**HTCSEMI** · Analog To Digital Converters (ADCs) · DIP-16
HT7705ANZ from HTCSEMI, in a DIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SCLK | input | Schmitt-triggered serial clock input used to access serial data from the HT7705, and it may be continuous or non-continuous. |
| 2 | MCLK IN | input | Master clock input that accepts a crystal/resonator across MCLK IN and MCLK OUT or a CMOS-compatible external clock, with operating clock frequencies from 500 kHz to 5 MHz. |
| 3 | MCLK OUT | output | Provides an inverted clock when an external clock drives MCLK IN, is capable of driving one CMOS load, and can be disabled via the CLK DIS bit of the Clock Register. |
| 4 | CS | input | Active-low chip select input that selects the HT7705 and can be hard-wired low for three-wire interface operation. |
| 5 | RESET | input | Active-low input that resets the control logic, interface logic, calibration coefficients, digital filter and analog modulator to power-on status. |
| 6 | AIN2(+) | passive | Positive input of differential analog input Channel 2 on the HT7705 (the HT7706 uses this pin as Analog Input Channel 1). |
| 7 | AIN1(+) | passive | Positive input of differential analog input Channel 1 on the HT7705 (the HT7706 uses this pin as Analog Input Channel 2). |
| 8 | AIN1(-) | passive | Negative input of differential analog input Channel 1 on the HT7705 (the HT7706 uses this pin as the COMMON input to which all analog inputs are referenced). |
| 9 | REF IN(+) | passive | Positive input of the differential reference input, which must be greater than REF IN(-) and can lie anywhere between VDD and GND. |
| 10 | REF IN(-) | passive | Negative input of the differential reference input, which can lie anywhere between VDD and GND provided REF IN(+) is greater than REF IN(-). |
| 11 | AIN2(-) | passive | Negative input of differential analog input Channel 2 on the HT7705 (the HT7706 uses this pin as Analog Input Channel 3). |
| 12 | DRDY | output | Logic output that goes low when a new output word is available in the data register and returns high after a full read or before the next update, also indicating completion of on-chip calibration. |
| 13 | DOUT | output | Serial data output that shifts data out from the output shift register (setup, communications, clock or data register, as selected by the Communications Register). |
| 14 | DIN | input | Serial data input that writes data into the input shift register, which is transferred to the setup, clock or communications register as selected by the Communications Register. |
| 15 | VDD | power_in | Supply voltage input for +2.7 V to +5.25 V operation. |
| 16 | GND | power_in | Ground reference point for the device's internal circuitry. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTCSEMI |
| Package | DIP-16 |
| Category | Data Converters |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD Voltage (2.7 V to 3.3 V range) | VDD | 2.7 | | 3.3 | V | For specified performance | 3 |
| VDD Voltage (4.75 V to 5.25 V range) | VDD | 4.75 | | 5.25 | V | For specified performance | 3 |
| Output Low Voltage | VOL | | | 0.4 | V | ISINK = 800 µA, VDD = 5 V; except MCLK OUT | 3 |
| Output High Voltage | VOH | 4 | | | V | ISOURCE = 200 µA, VDD = 5 V; except MCLK OUT | 3 |
| Floating State Leakage Current | | | | 10 | µA | | 3 |
| Power Supply Current, 3 V group: BUF=0, fCLKIN=1 MHz, gains 1 to 128 | IDD | | | 0.32 | mA | BUF Bit = 0. fCLKIN = 1 MHz. Gains of 1 to 128 | 3 |
| Power Supply Current, 3 V group: BUF=1, fCLKIN=1 MHz, gains 1 to 128 | IDD | | | 0.6 | mA | BUF Bit = 1. fCLKIN = 1 MHz. Gains of 1 to 128 | 3 |
| Power Supply Current, 3 V group: BUF=0, fCLKIN=2.4576 MHz, gains 1 to 4 | IDD | | | 0.4 | mA | BUF Bit = 0. fCLKIN = 2.4576 MHz. Gains of 1 to 4 | 3 |
| Power Supply Current, 3 V group: BUF=0, fCLKIN=2.4576 MHz, gains 8 to 128 | IDD | | | 0.6 | mA | BUF Bit = 0. fCLKIN = 2.4576 MHz. Gains of 8 to 128 | 3 |
| Power Supply Current, 3 V group: BUF=1, fCLKIN=2.4576 MHz, gains 1 to 4 | IDD | | | 0.7 | mA | BUF Bit = 1. fCLKIN = 2.4576 MHz. Gains of 1 to 4 | 3 |
| Power Supply Current, 3 V group: BUF=1, fCLKIN=2.4576 MHz, gains 8 to 128 | IDD | | | 1.1 | mA | BUF Bit = 1. fCLKIN = 2.4576 MHz. Gains of 8 to 128 | 3 |
| Power Supply Current, 5 V group: BUF=0, fCLKIN=1 MHz, gains 1 to 128 | IDD | | | 0.45 | mA | BUF Bit = 0. fCLKIN = 1 MHz. Gains of 1 to 128 | 3 |
| Power Supply Current, 5 V group: BUF=1, fCLKIN=1 MHz, gains 1 to 128 | IDD | | | 0.7 | mA | BUF Bit = 1. fCLKIN = 1 MHz. Gains of 1 to 128 | 3 |
| Power Supply Current, 5 V group: BUF=0, fCLKIN=2.4576 MHz, gains 1 to 4 | IDD | | | 0.6 | mA | BUF Bit = 0. fCLKIN = 2.4576 MHz. Gains of 1 to 4 | 3 |
| Power Supply Current, 5 V group: BUF=0, fCLKIN=2.4576 MHz, gains 8 to 128 | IDD | | | 0.85 | mA | BUF Bit = 0. fCLKIN = 2.4576 MHz. Gains of 8 to 128 | 3 |
| Power Supply Current, 5 V group: BUF=1, fCLKIN=2.4576 MHz, gains 1 to 4 | IDD | | | 0.9 | mA | BUF Bit = 1. fCLKIN = 2.4576 MHz. Gains of 1 to 4 | 3 |
| Power Supply Current, 5 V group: BUF=1, fCLKIN=2.4576 MHz, gains 8 to 128 | IDD | | | 1.3 | mA | BUF Bit = 1. fCLKIN = 2.4576 MHz. Gains of 8 to 128 | 3 |
| Standby (Power-Down) Current (5 V column) | | | | 16 | µA | | 3 |
| Standby (Power-Down) Current (3 V column) | | | | 8 | µA | | 3 |
| Master Clock Frequency fCLKIN (minimum) | fCLKIN | 400 | | | kHz | Crystal oscillator or externally supplied; for specified performance | 4 |
| Master Clock Frequency fCLKIN (maximum) | fCLKIN | | | 2.5 | MHz | Crystal oscillator or externally supplied; for specified performance | 4 |
| RESET Pulsewidth | t2 | 100 | | | ns | | 4 |
| VDD to GND | VDD | -0.3 | | 7 | V | | 5 |
| Analog Input Voltage to GND | | -0.3 | | | V | | 5 |
| Reference Input Voltage to GND | | -0.3 | | | V | | 5 |
| Digital Input Voltage to GND | | -0.3 | | | V | | 5 |
| Digital Output Voltage to GND | | -0.3 | | | V | | 5 |
| Operating Temperature Range | TA | -40 | | 85 | °C | Commercial (B Version) | 5 |
| Storage Temperature Range | | -65 | | 150 | °C | | 5 |
| Junction Temperature | TJ | | | 150 | °C | | 5 |
| Power Dissipation, Plastic DIP Package | | | | 450 | mW | Plastic DIP package | 5 |
| Lead Temperature, Soldering (10 sec) | | | | 260 | °C | Plastic DIP package, soldering 10 sec | 5 |
| ESD Rating | | 4000 | | | V | Printed as >4000 V | 5 |
| JA Thermal Impedance, Plastic DIP | θJA | | 105 | | °C/W | Plastic DIP package | 5 |
## CAD (KiCad official)
- Symbol: `HT7705ANZ`
- Footprint: `Package_DIP:DIP-16_W7.62mm`
- 3D model: DIP-16 (KiCad packages3D, STEP)
- 3D model files: `ht7705anz-etched.step` / `ht7705anz-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ht7705anz.step` / `ht7705anz.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HTCSEMI datasheet](docs/ht7705anz-datasheet.pdf) (32 pp, sha256 `51e85635652229a8`, retrieved 2026-10-26, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ht7705anz-datasheet.pdf)