main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ht7705anz: viewers · Ray
ht7705anz-etched.glb Publish 0.1.0 · Ray
ht7705anz-etched.step ht7705anz: factory component page (tier=lcsc) · Ray
ht7705anz-hero.glb ht7705anz: hero GLB from the etched model (keeps the MPN mark) · Ray
ht7705anz-hero.overlay.json Publish 0.1.0 · Ray
ht7705anz.glb Publish 0.1.0 · Ray
ht7705anz.kicad_mod Publish 0.1.0 · Ray
ht7705anz.kicad_sym Publish 0.1.0 · Ray
ht7705anz.lbr Publish 0.1.0 · Ray
ht7705anz.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

HT7705ANZ

HTCSEMI · Analog To Digital Converters (ADCs) · DIP-16

HT7705ANZ from HTCSEMI, in a DIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SCLK input Schmitt-triggered serial clock input used to access serial data from the HT7705, and it may be continuous or non-continuous.
2 MCLK IN input Master clock input that accepts a crystal/resonator across MCLK IN and MCLK OUT or a CMOS-compatible external clock, with operating clock frequencies from 500 kHz to 5 MHz.
3 MCLK OUT output Provides an inverted clock when an external clock drives MCLK IN, is capable of driving one CMOS load, and can be disabled via the CLK DIS bit of the Clock Register.
4 CS input Active-low chip select input that selects the HT7705 and can be hard-wired low for three-wire interface operation.
5 RESET input Active-low input that resets the control logic, interface logic, calibration coefficients, digital filter and analog modulator to power-on status.
6 AIN2(+) passive Positive input of differential analog input Channel 2 on the HT7705 (the HT7706 uses this pin as Analog Input Channel 1).
7 AIN1(+) passive Positive input of differential analog input Channel 1 on the HT7705 (the HT7706 uses this pin as Analog Input Channel 2).
8 AIN1(-) passive Negative input of differential analog input Channel 1 on the HT7705 (the HT7706 uses this pin as the COMMON input to which all analog inputs are referenced).
9 REF IN(+) passive Positive input of the differential reference input, which must be greater than REF IN(-) and can lie anywhere between VDD and GND.
10 REF IN(-) passive Negative input of the differential reference input, which can lie anywhere between VDD and GND provided REF IN(+) is greater than REF IN(-).
11 AIN2(-) passive Negative input of differential analog input Channel 2 on the HT7705 (the HT7706 uses this pin as Analog Input Channel 3).
12 DRDY output Logic output that goes low when a new output word is available in the data register and returns high after a full read or before the next update, also indicating completion of on-chip calibration.
13 DOUT output Serial data output that shifts data out from the output shift register (setup, communications, clock or data register, as selected by the Communications Register).
14 DIN input Serial data input that writes data into the input shift register, which is transferred to the setup, clock or communications register as selected by the Communications Register.
15 VDD power_in Supply voltage input for +2.7 V to +5.25 V operation.
16 GND power_in Ground reference point for the device's internal circuitry.

Key specifications

Parameter Value
Manufacturer HTCSEMI
Package DIP-16
Category Data Converters
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VDD Voltage (2.7 V to 3.3 V range) VDD 2.7 3.3 V For specified performance 3
VDD Voltage (4.75 V to 5.25 V range) VDD 4.75 5.25 V For specified performance 3
Output Low Voltage VOL 0.4 V ISINK = 800 µA, VDD = 5 V; except MCLK OUT 3
Output High Voltage VOH 4 V ISOURCE = 200 µA, VDD = 5 V; except MCLK OUT 3
Floating State Leakage Current 10 µA 3
Power Supply Current, 3 V group: BUF=0, fCLKIN=1 MHz, gains 1 to 128 IDD 0.32 mA BUF Bit = 0. fCLKIN = 1 MHz. Gains of 1 to 128 3
Power Supply Current, 3 V group: BUF=1, fCLKIN=1 MHz, gains 1 to 128 IDD 0.6 mA BUF Bit = 1. fCLKIN = 1 MHz. Gains of 1 to 128 3
Power Supply Current, 3 V group: BUF=0, fCLKIN=2.4576 MHz, gains 1 to 4 IDD 0.4 mA BUF Bit = 0. fCLKIN = 2.4576 MHz. Gains of 1 to 4 3
Power Supply Current, 3 V group: BUF=0, fCLKIN=2.4576 MHz, gains 8 to 128 IDD 0.6 mA BUF Bit = 0. fCLKIN = 2.4576 MHz. Gains of 8 to 128 3
Power Supply Current, 3 V group: BUF=1, fCLKIN=2.4576 MHz, gains 1 to 4 IDD 0.7 mA BUF Bit = 1. fCLKIN = 2.4576 MHz. Gains of 1 to 4 3
Power Supply Current, 3 V group: BUF=1, fCLKIN=2.4576 MHz, gains 8 to 128 IDD 1.1 mA BUF Bit = 1. fCLKIN = 2.4576 MHz. Gains of 8 to 128 3
Power Supply Current, 5 V group: BUF=0, fCLKIN=1 MHz, gains 1 to 128 IDD 0.45 mA BUF Bit = 0. fCLKIN = 1 MHz. Gains of 1 to 128 3
Power Supply Current, 5 V group: BUF=1, fCLKIN=1 MHz, gains 1 to 128 IDD 0.7 mA BUF Bit = 1. fCLKIN = 1 MHz. Gains of 1 to 128 3
Power Supply Current, 5 V group: BUF=0, fCLKIN=2.4576 MHz, gains 1 to 4 IDD 0.6 mA BUF Bit = 0. fCLKIN = 2.4576 MHz. Gains of 1 to 4 3
Power Supply Current, 5 V group: BUF=0, fCLKIN=2.4576 MHz, gains 8 to 128 IDD 0.85 mA BUF Bit = 0. fCLKIN = 2.4576 MHz. Gains of 8 to 128 3
Power Supply Current, 5 V group: BUF=1, fCLKIN=2.4576 MHz, gains 1 to 4 IDD 0.9 mA BUF Bit = 1. fCLKIN = 2.4576 MHz. Gains of 1 to 4 3
Power Supply Current, 5 V group: BUF=1, fCLKIN=2.4576 MHz, gains 8 to 128 IDD 1.3 mA BUF Bit = 1. fCLKIN = 2.4576 MHz. Gains of 8 to 128 3
Standby (Power-Down) Current (5 V column) 16 µA 3
Standby (Power-Down) Current (3 V column) 8 µA 3
Master Clock Frequency fCLKIN (minimum) fCLKIN 400 kHz Crystal oscillator or externally supplied; for specified performance 4
Master Clock Frequency fCLKIN (maximum) fCLKIN 2.5 MHz Crystal oscillator or externally supplied; for specified performance 4
RESET Pulsewidth t2 100 ns 4
VDD to GND VDD -0.3 7 V 5
Analog Input Voltage to GND -0.3 V 5
Reference Input Voltage to GND -0.3 V 5
Digital Input Voltage to GND -0.3 V 5
Digital Output Voltage to GND -0.3 V 5
Operating Temperature Range TA -40 85 °C Commercial (B Version) 5
Storage Temperature Range -65 150 °C 5
Junction Temperature TJ 150 °C 5
Power Dissipation, Plastic DIP Package 450 mW Plastic DIP package 5
Lead Temperature, Soldering (10 sec) 260 °C Plastic DIP package, soldering 10 sec 5
ESD Rating 4000 V Printed as >4000 V 5
JA Thermal Impedance, Plastic DIP θJA 105 °C/W Plastic DIP package 5

CAD (KiCad official)

  • Symbol: HT7705ANZ
  • Footprint: Package_DIP:DIP-16_W7.62mm
  • 3D model: DIP-16 (KiCad packages3D, STEP)
  • 3D model files: ht7705anz-etched.step / ht7705anz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ht7705anz.step / ht7705anz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HTCSEMI datasheet (32 pp, sha256 51e85635652229a8, retrieved 2026-10-26, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF