component
HT7533H23
Public Made by Adomby adom
HX hengjiaxing Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-3. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
HT7533H23
HX hengjiaxing · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-3
HT7533H23 from HX hengjiaxing, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin, the common reference for the regulator (listed as 地 in the datasheet pin function table). |
| 2 | VIN | power_in | Input pin; the input voltage must stay within the absolute maximum rating of -0.3 V to +30 V, and input capacitors should be placed close to this pin. |
| 3 | VOUT | power_out | Regulated output pin; an output capacitor greater than 2.2 µF must be connected from this pin to ground, with tantalum capacitors recommended. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HX hengjiaxing |
| Package | SOT-23-3 |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 输出电压 (Output voltage) | VOUT | 3.234 | 3.3 | 3.366 | V | VIN=VOUT+2.0V, IOUT=10mA | 4 |
| 输出电压精度 (Output voltage accuracy) | VOUT | -2 | 2 | % | 1 | ||
| 输出电流 (Output current) | IOUT | 70 | 100 | mA | VIN=VOUT+2.0V | 4 | |
| 负载调整率 (Load regulation) | △VOUT | 25 | 60 | mV | VIN=VOUT+2.0V, 1mA≤IOUT≤50mA | 4 | |
| 低压差 (Dropout voltage) | VDIF | 25 | 55 | mV | IOUT=1mA，△VOUT=2% | 4 | |
| 静态电流 (Quiescent current) | ISS | 1.5 | 3 | μA | 无负载 | 4 | |
| 线性调整率 (Line regulation) | △VOUT/VOUT*△VIN | 0.2 | %/V | VOUT+1.0V≤VIN≤30V, IOUT=1mA | 4 | ||
| 输入电压 (Input voltage) | VIN | 30 | V | 4 | |||
| 工作电压 (Operating/input voltage, absolute maximum) | VIN | -0.3 | 30 | V | 2 | ||
| 贮存温度 (Storage temperature) | TSTG | -50 | 125 | ℃ | 2 | ||
| 工作温度 (Operating temperature) | TA | -40 | 85 | ℃ | 2 | ||
| 输出电容 (Output capacitor requirement) | 2.2 | μF | 输出到地, tantalum recommended | 7 | |||
| 功耗 (Power dissipation, SOT23-3) | PD | 200 | mW | SOT23-3 | 2 | ||
| 温度系数 (Temperature coefficient of VOUT) | △VOUT/△TA*VOUT | 100 | ppm/℃ | VIN=VOUT+2.0V, IOUT=10mA, -40℃≤TA≤85℃ | 4 | ||
| 热阻 (Thermal resistance junction-to-ambient, SOT23-3) | θJA | 500 | ℃/W | SOT23-3 | 2 |
CAD (KiCad official)
- Symbol:
HT7533H23 - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3 (KiCad packages3D, STEP)
- 3D model files:
ht7533h23-etched.step/ht7533h23-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ht7533h23.step/ht7533h23.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HX hengjiaxing datasheet (11 pp, sha256
ae9dd2f36371575a, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HT7533H23
**HX hengjiaxing** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-3
HT7533H23 from HX hengjiaxing, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin, the common reference for the regulator (listed as 地 in the datasheet pin function table). |
| 2 | VIN | power_in | Input pin; the input voltage must stay within the absolute maximum rating of -0.3 V to +30 V, and input capacitors should be placed close to this pin. |
| 3 | VOUT | power_out | Regulated output pin; an output capacitor greater than 2.2 µF must be connected from this pin to ground, with tantalum capacitors recommended. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HX hengjiaxing |
| Package | SOT-23-3 |
| Category | Power Management (PMIC) |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 输出电压 (Output voltage) | VOUT | 3.234 | 3.3 | 3.366 | V | VIN=VOUT+2.0V, IOUT=10mA | 4 |
| 输出电压精度 (Output voltage accuracy) | VOUT | -2 | | 2 | % | | 1 |
| 输出电流 (Output current) | IOUT | 70 | 100 | | mA | VIN=VOUT+2.0V | 4 |
| 负载调整率 (Load regulation) | △VOUT | | 25 | 60 | mV | VIN=VOUT+2.0V, 1mA≤IOUT≤50mA | 4 |
| 低压差 (Dropout voltage) | VDIF | | 25 | 55 | mV | IOUT=1mA，△VOUT=2% | 4 |
| 静态电流 (Quiescent current) | ISS | | 1.5 | 3 | μA | 无负载 | 4 |
| 线性调整率 (Line regulation) | △VOUT/VOUT*△VIN | | | 0.2 | %/V | VOUT+1.0V≤VIN≤30V, IOUT=1mA | 4 |
| 输入电压 (Input voltage) | VIN | | | 30 | V | | 4 |
| 工作电压 (Operating/input voltage, absolute maximum) | VIN | -0.3 | | 30 | V | | 2 |
| 贮存温度 (Storage temperature) | TSTG | -50 | | 125 | ℃ | | 2 |
| 工作温度 (Operating temperature) | TA | -40 | | 85 | ℃ | | 2 |
| 输出电容 (Output capacitor requirement) | | 2.2 | | | μF | 输出到地, tantalum recommended | 7 |
| 功耗 (Power dissipation, SOT23-3) | PD | | | 200 | mW | SOT23-3 | 2 |
| 温度系数 (Temperature coefficient of VOUT) | △VOUT/△TA*VOUT | | 100 | | ppm/℃ | VIN=VOUT+2.0V, IOUT=10mA, -40℃≤TA≤85℃ | 4 |
| 热阻 (Thermal resistance junction-to-ambient, SOT23-3) | θJA | | 500 | | ℃/W | SOT23-3 | 2 |
## CAD (KiCad official)
- Symbol: `HT7533H23`
- Footprint: `Package_TO_SOT_SMD:SOT-23-3`
- 3D model: SOT-23-3 (KiCad packages3D, STEP)
- 3D model files: `ht7533h23-etched.step` / `ht7533h23-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ht7533h23.step` / `ht7533h23.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HX hengjiaxing datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589808241564946432) (11 pp, sha256 `ae9dd2f36371575a`, retrieved 2026-10-18, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ht7533h23-datasheet.pdf)