Generated by kicad-footprint-generator · KiCad file format 20260206
HT7144S
UMW · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23
HT7144S from UMW, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference pin of the LDO regulator; the datasheet states no additional limits for this pin. |
| 2 | VIN | power_in | Regulator input pin, rated for a maximum input voltage of 30 V per the limit parameter table. |
| 3 | VOUT | power_out | Regulated output pin; for the 7144 variant the output voltage is 4.4 V typical with a 4.268 V to 4.532 V range at VIN = 6.4 V and IOUT = 10 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | UMW |
| Package | SOT-23 |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage | VOUT | 4.268 | 4.4 | 4.532 | V | VIN=6.4V, IOUT=10mA | 5 |
| Output current | IOUT | 60 | mA | VIN=6.4V | 5 | ||
| Output voltage temperature coefficient | ΔVOUT/ΔTA | -0.7 | 0.7 | mV/°C | VIN=6.4V, IOUT=10mA, 0°C≤TA≤70°C | 5 | |
| Maximum input voltage | VIN | 30 | V | 2 | |||
| Power waste | PD | 400 | mW | 2 | |||
| Working temperature | Tw | -25 | 70 | °C | 2 | ||
| Storage temperature | Tc | -50 | 125 | °C | 2 | ||
| Welding temperature | Th | 260 | °C | 10s | 2 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
HT7144S - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23, generated on the KiCad land (body 1.3 x 2.9 mm, terminals on the pads, 1.0 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ht7144s-etched.step/ht7144s-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ht7144s.step/ht7144s.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: UMW datasheet (14 pp, sha256
ae108c17cf1258c8, retrieved 2026-11-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).