Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

HT7144S

UMW · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23

HT7144S from UMW, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 GND power_in Ground reference pin of the LDO regulator; the datasheet states no additional limits for this pin.
2 VIN power_in Regulator input pin, rated for a maximum input voltage of 30 V per the limit parameter table.
3 VOUT power_out Regulated output pin; for the 7144 variant the output voltage is 4.4 V typical with a 4.268 V to 4.532 V range at VIN = 6.4 V and IOUT = 10 mA.

Key specifications

Parameter Value
Manufacturer UMW
Package SOT-23
Category Power Management (PMIC)
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage VOUT 4.268 4.4 4.532 V VIN=6.4V, IOUT=10mA 5
Output current IOUT 60 mA VIN=6.4V 5
Output voltage temperature coefficient ΔVOUT/ΔTA -0.7 0.7 mV/°C VIN=6.4V, IOUT=10mA, 0°C≤TA≤70°C 5
Maximum input voltage VIN 30 V 2
Power waste PD 400 mW 2
Working temperature Tw -25 70 °C 2
Storage temperature Tc -50 125 °C 2
Welding temperature Th 260 °C 10s 2

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: HT7144S
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: SOT-23, generated on the KiCad land (body 1.3 x 2.9 mm, terminals on the pads, 1.0 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: ht7144s-etched.step / ht7144s-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ht7144s.step / ht7144s.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: UMW datasheet (14 pp, sha256 ae108c17cf1258c8, retrieved 2026-11-12, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF