main
History Download
Ray Publish 0.1.0 40b86de

HT705ARZ

HTCSEMI · Monitors & Reset Circuits · SOP-8

HT705ARZ from HTCSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PBRST input Pushbutton reset input that initiates a reset when held low for tPB of at least 150 ns, with low-level input leakage of -50 to -450 µA at VCC = 5.5 V.
2 VCC power_in Power supply input; the datasheet gives a rated supply of 5.0 V, a recommended range of 1.2 to 5.5 V, and an absolute maximum of 7.0 V.
3 GND power_in Ground reference for the device.
4 IN input Monitored voltage input compared against an input trip point of 1.2 to 1.3 V at VCC = 5.0 V, with input low-level leakage of -1.0 µA maximum.
5 NMI output Non-maskable interrupt output that responds to the IN input, with a specified low-level output current IOL of 10.0 mA at VOL = 0.4 V.
6 ST input Strobe input with a minimum pulse width tST of 10 ns, and input low-level leakage of -10 to -100 µA at VCC = 5.5 V.
7 RST output Active-low reset output with VOH of at least VCC - 0.3 V at IOH = -500 µA for VCC from 5.0 to 5.5 V, and a reset active time of 130 to 285 ms.
8 WDS output Watchdog status output with high-level output current IOH of -100 to -1000 µA at VOH = 2.4 V for VCC from 4.5 to 5.5 V, tied to a watchdog timeout tTD of 1.0 to 2.2 s.

Key specifications

Parameter Value
Manufacturer HTCSEMI
Package SOP-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 1.2 5.5 V 2
Input voltage, low level VIL -0.03 0.5 V 2
Input voltage, high level VIH 2 V 2
Operating temperature range TA -40 85 °C 2
Supply voltage VCC -0.5 7 V 2
Input voltage, low level VIL -0.5 V 2
Storage temperature Tstg -60 125 °C 2
Input voltage, low level VIL 0.5 V VCC=from 2.4 to 5.5V 3
Input voltage, high level VIH 2 V VCC=from 2.4 to 5.5V 3
Output current, low level (NMI, RST) IOL 10 mA VCC=from 2.4 to 5.5V; VOL=0.4V 3
Output current, high level (WDS, NMI) IOH -100 -1000 µA VCC=from 4.5 to 5.5V; VOH=2.4V 3
Output current, high level (RST) IOH1 -10 mA VCC=from 5.0 to 5.5V; VOH=2.4V 3
Input leakage current, low level (IN) ILIL1 -1 µA VCC=from 1.2 to 5.5V; VIL=0 V 3
Input leakage current, low level (ST) ILIL2 -10 -100 µA VCC=5.5V; VIL=0 V 3
Input leakage current, low level (PBRST) ILIL3 -50 -450 µA VCC=5.5V; VIL=0 V 3
Input leakage current, high level ILIH 1 µA VCC=from 1.2 to 5.5V; VIH=VCC 3
Operating current ICC 60 µA VCC=from 1.2 to 5.5V; VIL=0 V, VIH=VCC 3
VCC trip point VCCTP 4.5 4.75 V VIL=0 V, VIH=VCC 3
IN input trip point VTP 1.2 1.3 V VCC=5.0 V; VIL=0 V, VIH=VCC 3
Watchdog timeout tTD 1 2.2 s VCC=5.0 V, TA=-40 to +85 °C (table 4 header) 4
PBRST stable low to RST and RST tPDLY 250 ns VCC=5.0 V, TA=-40 to +85 °C (table 4 header) 4
Reset active time tRST 130 285 ms VCC=5.0 V, TA=-40 to +85 °C (table 4 header) 4
VCC detect to RST and RST tRPD 8 s VCC=5.0 V, TA=-40 to +85 °C (table 4 header) 4
VCC detect to RST and RST tRPU 130 285 ms VCC=5.0 V, TA=-40 to +85 °C (table 4 header) 4
VIN detect to NMI tIPD 8 s VCC=5.0 V, TA=-40 to +85 °C (table 4 header) 4
Pulse width (PBRST low) tPB 150 ns PBRST=VIL; VCC=5.0 V, TA=-40 to +85 °C (table 4 header) 4
ST pulse width tST 10 ns VCC=5.0 V, TA=-40 to +85 °C (table 4 header) 4

CAD (KiCad official)

  • Symbol: HT705ARZ
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: ht705arz-etched.step / ht705arz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ht705arz.step / ht705arz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HTCSEMI datasheet (9 pp, sha256 706a7699c8b4009a, retrieved 2026-11-04, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF