3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHT705ARZ
HTCSEMI · Monitors & Reset Circuits · SOP-8
HT705ARZ from HTCSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PBRST | input | Pushbutton reset input that initiates a reset when held low for tPB of at least 150 ns, with low-level input leakage of -50 to -450 µA at VCC = 5.5 V. |
| 2 | VCC | power_in | Power supply input; the datasheet gives a rated supply of 5.0 V, a recommended range of 1.2 to 5.5 V, and an absolute maximum of 7.0 V. |
| 3 | GND | power_in | Ground reference for the device. |
| 4 | IN | input | Monitored voltage input compared against an input trip point of 1.2 to 1.3 V at VCC = 5.0 V, with input low-level leakage of -1.0 µA maximum. |
| 5 | NMI | output | Non-maskable interrupt output that responds to the IN input, with a specified low-level output current IOL of 10.0 mA at VOL = 0.4 V. |
| 6 | ST | input | Strobe input with a minimum pulse width tST of 10 ns, and input low-level leakage of -10 to -100 µA at VCC = 5.5 V. |
| 7 | RST | output | Active-low reset output with VOH of at least VCC - 0.3 V at IOH = -500 µA for VCC from 5.0 to 5.5 V, and a reset active time of 130 to 285 ms. |
| 8 | WDS | output | Watchdog status output with high-level output current IOH of -100 to -1000 µA at VOH = 2.4 V for VCC from 4.5 to 5.5 V, tied to a watchdog timeout tTD of 1.0 to 2.2 s. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTCSEMI |
| Package | SOP-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 1.2 | 5.5 | V | 2 | ||
| Input voltage, low level | VIL | -0.03 | 0.5 | V | 2 | ||
| Input voltage, high level | VIH | 2 | V | 2 | |||
| Operating temperature range | TA | -40 | 85 | °C | 2 | ||
| Supply voltage | VCC | -0.5 | 7 | V | 2 | ||
| Input voltage, low level | VIL | -0.5 | V | 2 | |||
| Storage temperature | Tstg | -60 | 125 | °C | 2 | ||
| Input voltage, low level | VIL | 0.5 | V | VCC=from 2.4 to 5.5V | 3 | ||
| Input voltage, high level | VIH | 2 | V | VCC=from 2.4 to 5.5V | 3 | ||
| Output current, low level (NMI, RST) | IOL | 10 | mA | VCC=from 2.4 to 5.5V; VOL=0.4V | 3 | ||
| Output current, high level (WDS, NMI) | IOH | -100 | -1000 | µA | VCC=from 4.5 to 5.5V; VOH=2.4V | 3 | |
| Output current, high level (RST) | IOH1 | -10 | mA | VCC=from 5.0 to 5.5V; VOH=2.4V | 3 | ||
| Input leakage current, low level (IN) | ILIL1 | -1 | µA | VCC=from 1.2 to 5.5V; VIL=0 V | 3 | ||
| Input leakage current, low level (ST) | ILIL2 | -10 | -100 | µA | VCC=5.5V; VIL=0 V | 3 | |
| Input leakage current, low level (PBRST) | ILIL3 | -50 | -450 | µA | VCC=5.5V; VIL=0 V | 3 | |
| Input leakage current, high level | ILIH | 1 | µA | VCC=from 1.2 to 5.5V; VIH=VCC | 3 | ||
| Operating current | ICC | 60 | µA | VCC=from 1.2 to 5.5V; VIL=0 V, VIH=VCC | 3 | ||
| VCC trip point | VCCTP | 4.5 | 4.75 | V | VIL=0 V, VIH=VCC | 3 | |
| IN input trip point | VTP | 1.2 | 1.3 | V | VCC=5.0 V; VIL=0 V, VIH=VCC | 3 | |
| Watchdog timeout | tTD | 1 | 2.2 | s | VCC=5.0 V, TA=-40 to +85 °C (table 4 header) | 4 | |
| PBRST stable low to RST and RST | tPDLY | 250 | ns | VCC=5.0 V, TA=-40 to +85 °C (table 4 header) | 4 | ||
| Reset active time | tRST | 130 | 285 | ms | VCC=5.0 V, TA=-40 to +85 °C (table 4 header) | 4 | |
| VCC detect to RST and RST | tRPD | 8 | s | VCC=5.0 V, TA=-40 to +85 °C (table 4 header) | 4 | ||
| VCC detect to RST and RST | tRPU | 130 | 285 | ms | VCC=5.0 V, TA=-40 to +85 °C (table 4 header) | 4 | |
| VIN detect to NMI | tIPD | 8 | s | VCC=5.0 V, TA=-40 to +85 °C (table 4 header) | 4 | ||
| Pulse width (PBRST low) | tPB | 150 | ns | PBRST=VIL; VCC=5.0 V, TA=-40 to +85 °C (table 4 header) | 4 | ||
| ST pulse width | tST | 10 | ns | VCC=5.0 V, TA=-40 to +85 °C (table 4 header) | 4 |
CAD (KiCad official)
- Symbol:
HT705ARZ - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
ht705arz-etched.step/ht705arz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ht705arz.step/ht705arz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HTCSEMI datasheet (9 pp, sha256
706a7699c8b4009a, retrieved 2026-11-04, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).