component
HT6501ARTZ
Public Made by Adomby adom
HTCSEMI AC-DC Controllers and Regulators, SOT23-5. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownHT6501ARTZ
HTCSEMI · AC-DC Controllers and Regulators · SOT23-5
HT6501ARTZ from HTCSEMI, in a SOT23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | D1 | output | Drain 1. Open-drain output of internal N-channel power switch Q1; connects to one end of the center-tapped transformer primary. Rated up to 14 V and 500 mA peak (350 mA max continuous at Vcc = 5 V, 150 mA at 3.3 V). |
| 2 | VCC | power_in | Supply voltage input. Recommended operating range 3 V to 5.5 V (absolute max -0.3 V to +6 V). Connects to the center-tap of the transformer primary in typical push-pull operation. |
| 3 | D2 | output | Drain 2. Open-drain output of internal N-channel power switch Q2; connects to the other end of the center-tapped transformer primary. Rated up to 14 V and 500 mA peak (350 mA max continuous at Vcc = 5 V, 150 mA at 3.3 V). |
| 4 | GND | power_in | Ground. Return for the internal N-channel power switches and control logic. Pins 4 and 5 are both GND and should be tied together to the board ground plane. |
| 5 | GND | power_in | Ground. Return for the internal N-channel power switches and control logic. Pins 4 and 5 are both GND and should be tied together to the board ground plane. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTCSEMI |
| Package | SOT23-5 |
| Category | PMIC |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
HT6501ARTZ
CAD (KiCad official)
- Symbol:
HT6501ARTZ - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT23-5 (KiCad packages3D, STEP)
- 3D model files:
ht6501artz-etched.step/ht6501artz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ht6501artz.step/ht6501artz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HTCSEMI datasheet (21 pp, sha256
e12c487ffaa0be82, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).