main
History Download
Ray Publish 0.1.0 9740434

HT4853ARZ

HTCSEMI · RS-485 / RS-422 ICs · SOP-8

HT4853ARZ from HTCSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RO output Receiver output: logic high when A-B is above +0.2V or the input is open, logic low when A-B is below -0.2V, high-impedance when RE is high.
2 RE input Receiver output enable (active low): low enables RO, high places RO in high impedance; input high threshold 2.0V min, low 0.8V max.
3 DE input Driver output enable: high enables the driver outputs, low places them in high impedance; input high threshold 2.0V min, low 0.8V max.
4 DI input Driver input: a low on DI forces the non-inverting output low and the inverting output high, and a high does the opposite when DE is high; range -0.3V to 7V.
5 GND power_in Ground reference for all device voltages.
6 A bidirectional Receiver input and driver output on the RS-485 bus, rated -7.5V to +12.5V with a -7V to +12V common-mode input range.
7 B bidirectional Receiver input and driver output on the RS-485 bus, rated -7.5V to +12.5V with a -7V to +12V common-mode input range.
8 VCC power_in Positive supply operating from a single 3.3V ±0.3V, with an absolute maximum of 7V.

Key specifications

Parameter Value
Manufacturer HTCSEMI
Package SOP-8
Category Interface
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Differential driver output, no load VOD1 3 V 2
Differential driver output, with load (RS-422) VOD2 1 V R = 10Ω (RS-422) 2
Differential driver output, with load (RS-485) VOD2 0.8 V R = 54Ω (RS-485), Figure 4 2
Change in magnitude of driver differential output voltage for complementary states ΔVOD 0.2 V R = 54Ω or 50Ω, Figure 4 2
Change in magnitude of driver common-mode output voltage for complementary states ΔVOC 0.2 V R = 54Ω or 100Ω, Figure 4 2
Input high voltage (DE, DI, RE) VIH 2 V 2
Input low voltage (DE, DI, RE) VIL 0.8 V 2
Input current (DE, DI, RE) IIN1 -2 2 µA 2
Input current (A, B), VIN = 12V IIN2 1 mA DE = 0V; VIN = 12V 2
Input current (A, B), VIN = -7V IIN2 -0.8 mA VCC = 0V or 3.35V; VIN = -7V 2
Receiver differential threshold voltage VTH -0.2 0.2 V 2
Receiver input hysteresis ΔVTH 70 mV VCM = 0V 2
Receiver output high voltage VOH 2.5 V IO = -1.5mA, VID = 200mV 2
Receiver output low voltage VOL 0.4 V IO = 2.5mA, VID = -200mV 2
Three-state (high impedance) output current at receiver IOZR -1 1 µA 2
Receiver input resistance RIN 12 kΩ 2
No-load supply current ICC 500 800 µA DE = VCC 3
No-load supply current ICC 300 400 µA RE = 0V or VCC; DE = 0V 3
Driver short-circuit current, VO = High IOSD1 250 mA VO = High 3
Driver short-circuit current, VO = Low IOSD2 250 mA VO = Low 3
Receiver short-circuit current IOSR -95 95 mA 3
ESD protection, Human Body Model (A, B, Y and Z pins) -15 15 kV A, B, Y and Z pins, Human Body Model 3
Driver input to output, low-to-high propagation delay tPLH 10 80 100 ns RDIFF = 54Ω 3
Driver input to output, high-to-low propagation delay tPHL 10 80 100 ns CL1 = CL2 = 100pF 3
Driver output skew to output tSKEW 5 10 ns RDIFF = 54Ω, CL1 = CL2 = 100pF 3
Driver enable to output high tZH 55 80 ns CL = 100pF, S2 closed 3
Driver enable to output low tZL 55 80 ns CL = 100pF, S1 closed 3
Driver disable time from low tLZ 60 90 ns CL = 15pF, S1 closed 3
Driver disable time from high tHZ 60 90 ns CL = 15pF, S2 closed 3
Driver differential propagation delay skew /tPLH - tPHL/ tSKD 13 20 ns RDIFF = 54Ω 3
Receiver input to output, low-to-high propagation delay tPLH 20 120 200 ns RDIFF = 54Ω, CL1 = CL2 = 100pF 3
Receiver input to output, high-to-low propagation delay tPHL 20 120 200 ns CL1 = CL2 = 100pF 3
Receiver skew /tPLH - tPHL/ 5 10 ns CL1 = CL2 = 100pF 3
Receiver enable to output low tZL 50 90 ns CRL = 15pF, S1 closed 3
Receiver enable to output high tZH 50 90 ns CRL = 15pF, S2 closed 3
Receiver disable time from low tLZ 40 80 ns CRL = 15pF, S1 closed 3
Receiver disable time from high tHZ 40 80 ns CRL = 15pF, S2 closed 3
Maximum data rate fMAX 2.5 5 10 Mbps 3
Supply voltage (VCC) VCC 7 V 2
Control input voltage -0.3 7 V 2
Driver input voltage (DI) -0.3 7 V 2
Driver output voltage (A, B) -7.5 12.5 V 2
Receiver input voltage (A, B) -7.5 12.5 V 2
Receiver output voltage (RO) -0.3 V 2
Continuous power dissipation, 8-pin SOP 471 mW TA = +70°C, derate 5.88mW/°C above +70°C 2
Storage temperature range -65 160 °C 2
Lead temperature (soldering, 10 sec) 300 °C 2
Supply voltage tolerance around nominal VCC -0.3 3.3 0.3 V VCC = 3.3V ±0.3V, TA = TMIN to TMAX 2
Operating temperature range TA -40 85 °C 2

CAD (KiCad official)

  • Symbol: HT4853ARZ
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: ht4853arz-etched.step / ht4853arz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ht4853arz.step / ht4853arz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HTCSEMI datasheet (7 pp, sha256 5eb12a858160a0f9, retrieved 2026-10-18, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF