Generated by kicad-footprint-generator · KiCad file format 20260206
HT4853ARZ
HTCSEMI · RS-485 / RS-422 ICs · SOP-8
HT4853ARZ from HTCSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output: logic high when A-B is above +0.2V or the input is open, logic low when A-B is below -0.2V, high-impedance when RE is high. |
| 2 | RE | input | Receiver output enable (active low): low enables RO, high places RO in high impedance; input high threshold 2.0V min, low 0.8V max. |
| 3 | DE | input | Driver output enable: high enables the driver outputs, low places them in high impedance; input high threshold 2.0V min, low 0.8V max. |
| 4 | DI | input | Driver input: a low on DI forces the non-inverting output low and the inverting output high, and a high does the opposite when DE is high; range -0.3V to 7V. |
| 5 | GND | power_in | Ground reference for all device voltages. |
| 6 | A | bidirectional | Receiver input and driver output on the RS-485 bus, rated -7.5V to +12.5V with a -7V to +12V common-mode input range. |
| 7 | B | bidirectional | Receiver input and driver output on the RS-485 bus, rated -7.5V to +12.5V with a -7V to +12V common-mode input range. |
| 8 | VCC | power_in | Positive supply operating from a single 3.3V ±0.3V, with an absolute maximum of 7V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTCSEMI |
| Package | SOP-8 |
| Category | Interface |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Differential driver output, no load | VOD1 | 3 | V | 2 | |||
| Differential driver output, with load (RS-422) | VOD2 | 1 | V | R = 10Ω (RS-422) | 2 | ||
| Differential driver output, with load (RS-485) | VOD2 | 0.8 | V | R = 54Ω (RS-485), Figure 4 | 2 | ||
| Change in magnitude of driver differential output voltage for complementary states | ΔVOD | 0.2 | V | R = 54Ω or 50Ω, Figure 4 | 2 | ||
| Change in magnitude of driver common-mode output voltage for complementary states | ΔVOC | 0.2 | V | R = 54Ω or 100Ω, Figure 4 | 2 | ||
| Input high voltage (DE, DI, RE) | VIH | 2 | V | 2 | |||
| Input low voltage (DE, DI, RE) | VIL | 0.8 | V | 2 | |||
| Input current (DE, DI, RE) | IIN1 | -2 | 2 | µA | 2 | ||
| Input current (A, B), VIN = 12V | IIN2 | 1 | mA | DE = 0V; VIN = 12V | 2 | ||
| Input current (A, B), VIN = -7V | IIN2 | -0.8 | mA | VCC = 0V or 3.35V; VIN = -7V | 2 | ||
| Receiver differential threshold voltage | VTH | -0.2 | 0.2 | V | 2 | ||
| Receiver input hysteresis | ΔVTH | 70 | mV | VCM = 0V | 2 | ||
| Receiver output high voltage | VOH | 2.5 | V | IO = -1.5mA, VID = 200mV | 2 | ||
| Receiver output low voltage | VOL | 0.4 | V | IO = 2.5mA, VID = -200mV | 2 | ||
| Three-state (high impedance) output current at receiver | IOZR | -1 | 1 | µA | 2 | ||
| Receiver input resistance | RIN | 12 | kΩ | 2 | |||
| No-load supply current | ICC | 500 | 800 | µA | DE = VCC | 3 | |
| No-load supply current | ICC | 300 | 400 | µA | RE = 0V or VCC; DE = 0V | 3 | |
| Driver short-circuit current, VO = High | IOSD1 | 250 | mA | VO = High | 3 | ||
| Driver short-circuit current, VO = Low | IOSD2 | 250 | mA | VO = Low | 3 | ||
| Receiver short-circuit current | IOSR | -95 | 95 | mA | 3 | ||
| ESD protection, Human Body Model (A, B, Y and Z pins) | -15 | 15 | kV | A, B, Y and Z pins, Human Body Model | 3 | ||
| Driver input to output, low-to-high propagation delay | tPLH | 10 | 80 | 100 | ns | RDIFF = 54Ω | 3 |
| Driver input to output, high-to-low propagation delay | tPHL | 10 | 80 | 100 | ns | CL1 = CL2 = 100pF | 3 |
| Driver output skew to output | tSKEW | 5 | 10 | ns | RDIFF = 54Ω, CL1 = CL2 = 100pF | 3 | |
| Driver enable to output high | tZH | 55 | 80 | ns | CL = 100pF, S2 closed | 3 | |
| Driver enable to output low | tZL | 55 | 80 | ns | CL = 100pF, S1 closed | 3 | |
| Driver disable time from low | tLZ | 60 | 90 | ns | CL = 15pF, S1 closed | 3 | |
| Driver disable time from high | tHZ | 60 | 90 | ns | CL = 15pF, S2 closed | 3 | |
| Driver differential propagation delay skew /tPLH - tPHL/ | tSKD | 13 | 20 | ns | RDIFF = 54Ω | 3 | |
| Receiver input to output, low-to-high propagation delay | tPLH | 20 | 120 | 200 | ns | RDIFF = 54Ω, CL1 = CL2 = 100pF | 3 |
| Receiver input to output, high-to-low propagation delay | tPHL | 20 | 120 | 200 | ns | CL1 = CL2 = 100pF | 3 |
| Receiver skew /tPLH - tPHL/ | 5 | 10 | ns | CL1 = CL2 = 100pF | 3 | ||
| Receiver enable to output low | tZL | 50 | 90 | ns | CRL = 15pF, S1 closed | 3 | |
| Receiver enable to output high | tZH | 50 | 90 | ns | CRL = 15pF, S2 closed | 3 | |
| Receiver disable time from low | tLZ | 40 | 80 | ns | CRL = 15pF, S1 closed | 3 | |
| Receiver disable time from high | tHZ | 40 | 80 | ns | CRL = 15pF, S2 closed | 3 | |
| Maximum data rate | fMAX | 2.5 | 5 | 10 | Mbps | 3 | |
| Supply voltage (VCC) | VCC | 7 | V | 2 | |||
| Control input voltage | -0.3 | 7 | V | 2 | |||
| Driver input voltage (DI) | -0.3 | 7 | V | 2 | |||
| Driver output voltage (A, B) | -7.5 | 12.5 | V | 2 | |||
| Receiver input voltage (A, B) | -7.5 | 12.5 | V | 2 | |||
| Receiver output voltage (RO) | -0.3 | V | 2 | ||||
| Continuous power dissipation, 8-pin SOP | 471 | mW | TA = +70°C, derate 5.88mW/°C above +70°C | 2 | |||
| Storage temperature range | -65 | 160 | °C | 2 | |||
| Lead temperature (soldering, 10 sec) | 300 | °C | 2 | ||||
| Supply voltage tolerance around nominal | VCC | -0.3 | 3.3 | 0.3 | V | VCC = 3.3V ±0.3V, TA = TMIN to TMAX | 2 |
| Operating temperature range | TA | -40 | 85 | °C | 2 |
CAD (KiCad official)
- Symbol:
HT4853ARZ - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
ht4853arz-etched.step/ht4853arz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ht4853arz.step/ht4853arz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HTCSEMI datasheet (7 pp, sha256
5eb12a858160a0f9, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).