main
Ray
ht431crz: specified limits as data (metadata.characteristics, 19 rows from the datasheet)
a4c221c
HT431CRZ
HTCSEMI · Voltage Reference · SOP-8
HT431CRZ from HTCSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REF | input | Reference input. High-impedance sense input compared internally against the 2.495 V bandgap. Cathode current is regulated so that V(REF) tracks VREF (~2.495 V). Typical reference input current 1.8 µA (max 4 µA). |
| 2 | CATHODE | power_in | Cathode (K). Regulated shunt terminal; sinks current from the load to hold V(REF) equal to the internal 2.495 V reference. Absolute max VKA = 44 V, IK continuous −100 to +150 mA, minimum current for regulation 0.5 mA (max). |
| 3 | ANODE | power_in | Anode (A). Common/return terminal, normally tied to circuit ground (or the low side of the sense divider). Carries the sum of cathode and reference currents. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTCSEMI |
| Package | SOP-8 |
| Category | PMIC |
| Pins | 3 |
Ordering variants
Same part, different packaging or reel option.
HT431CRZ
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reference Input Voltage (HT431C 2%) | VREF | 2.44 | 2.495 | 2.55 | V | VKA = VREF, IK = 10mA | 2 |
| Deviation of Reference Input Voltage Over Full Temperature Range | VREF(dev) | 3 | 17 | MV | Tmin Ta Tmax | 2 | |
| Ratio of Change in Reference Input Voltage to Change in Cathode Voltage | dVREF/dVKA | -1.4 | -2.7 | mV/V | VKA = 10V-VREF | 2 | |
| Ratio of Change in Reference Input Voltage to Change in Cathode Voltage | dVREF/dVKA | -1 | -2 | mV/V | VKA = 36V-10V | 2 | |
| Reference Input Current | IREF | 1.8 | 4 | ㎂ | R1 = 10K, R2 = (value not legible in text) | 2 | |
| Deviation of Reference Input Current Over Full Temperature Range | IREF(dev) | 0.4 | 1.2 | ㎂ | R1 = 10K, R2 = (value not legible in text) | 2 | |
| Minimum Cathode Current for Regulation | IK(min) | 0.25 | 0.5 | mA | 2 | ||
| Off-State Cathode Current | IK(off) | 0.26 | 0.9 | ㎂ | VKA = 40 V, VREF = 0 | 2 | |
| Dynamic Impedance | ZKA | 0.22 | 0.5 | IK = 10mA to 100 mA, f 1.0KHz | 2 | ||
| Cathode Voltage | VKA | 40 | V | Recommended minimum is VREF (not a numeric value) | 2 | ||
| Cathode Current | IK | 0.5 | 100 | mA | 2 | ||
| Cathode Voltage | VKA | 44 | V | 1 | |||
| Cathode Current Range (Continuous) | IK | -100 | 150 | mA | Continuous | 1 | |
| Reference Input Current Range | IREF | 0.05 | 10 | mA | 1 | ||
| Power Dissipation at 25oC (SOP, TO-92 package) | PD | 0.7 | W | Ta = 25oC, SOP, TO-92 package | 1 | ||
| Junction Temperature Range | TJ | -25 | 150 | oC | 1 | ||
| Operating Temperature Range | Tg | -25 | 85 | oC | Operating temperature range | 1 | |
| Storage Temperature Range | Tstg | -65 | 150 | oC | 1 | ||
| Thermal Resistance Junction to Ambient | RJA | 178 | oC/W | SOP, TO-92 package | 1 |
CAD (KiCad official)
- Symbol:
HT431CRZ - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
ht431crz-etched.step/ht431crz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ht431crz.step/ht431crz.glbare the bare package body.
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
ht431crz.step |
122 KB | You want the bare part, or you mark your own boards. |
ht431crz-etched.step |
1.6 MB | You want the part with HT431CRZ already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 407 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HTCSEMI datasheet (6 pp, sha256
0717f21d1e892efe, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HT431CRZ
**HTCSEMI** · Voltage Reference · SOP-8
HT431CRZ from HTCSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REF | input | Reference input. High-impedance sense input compared internally against the 2.495 V bandgap. Cathode current is regulated so that V(REF) tracks VREF (~2.495 V). Typical reference input current 1.8 µA (max 4 µA). |
| 2 | CATHODE | power_in | Cathode (K). Regulated shunt terminal; sinks current from the load to hold V(REF) equal to the internal 2.495 V reference. Absolute max VKA = 44 V, IK continuous −100 to +150 mA, minimum current for regulation 0.5 mA (max). |
| 3 | ANODE | power_in | Anode (A). Common/return terminal, normally tied to circuit ground (or the low side of the sense divider). Carries the sum of cathode and reference currents. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTCSEMI |
| Package | SOP-8 |
| Category | PMIC |
| Pins | 3 |
## Ordering variants
Same part, different packaging or reel option.
- `HT431CRZ`
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reference Input Voltage (HT431C 2%) | VREF | 2.44 | 2.495 | 2.55 | V | VKA = VREF, IK = 10mA | 2 |
| Deviation of Reference Input Voltage Over Full Temperature Range | VREF(dev) | | 3 | 17 | MV | Tmin Ta Tmax | 2 |
| Ratio of Change in Reference Input Voltage to Change in Cathode Voltage | dVREF/dVKA | | -1.4 | -2.7 | mV/V | VKA = 10V-VREF | 2 |
| Ratio of Change in Reference Input Voltage to Change in Cathode Voltage | dVREF/dVKA | | -1 | -2 | mV/V | VKA = 36V-10V | 2 |
| Reference Input Current | IREF | | 1.8 | 4 | ㎂ | R1 = 10K, R2 = (value not legible in text) | 2 |
| Deviation of Reference Input Current Over Full Temperature Range | IREF(dev) | | 0.4 | 1.2 | ㎂ | R1 = 10K, R2 = (value not legible in text) | 2 |
| Minimum Cathode Current for Regulation | IK(min) | | 0.25 | 0.5 | mA | | 2 |
| Off-State Cathode Current | IK(off) | | 0.26 | 0.9 | ㎂ | VKA = 40 V, VREF = 0 | 2 |
| Dynamic Impedance | ZKA | | 0.22 | 0.5 | | IK = 10mA to 100 mA, f 1.0KHz | 2 |
| Cathode Voltage | VKA | | | 40 | V | Recommended minimum is VREF (not a numeric value) | 2 |
| Cathode Current | IK | 0.5 | | 100 | mA | | 2 |
| Cathode Voltage | VKA | | | 44 | V | | 1 |
| Cathode Current Range (Continuous) | IK | -100 | | 150 | mA | Continuous | 1 |
| Reference Input Current Range | IREF | 0.05 | | 10 | mA | | 1 |
| Power Dissipation at 25oC (SOP, TO-92 package) | PD | | | 0.7 | W | Ta = 25oC, SOP, TO-92 package | 1 |
| Junction Temperature Range | TJ | -25 | | 150 | oC | | 1 |
| Operating Temperature Range | Tg | -25 | | 85 | oC | Operating temperature range | 1 |
| Storage Temperature Range | Tstg | -65 | | 150 | oC | | 1 |
| Thermal Resistance Junction to Ambient | RJA | | 178 | | oC/W | SOP, TO-92 package | 1 |
## CAD (KiCad official)
- Symbol: `HT431CRZ`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `ht431crz-etched.step` / `ht431crz-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ht431crz.step` / `ht431crz.glb` are the bare package body.
## 3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
| [`ht431crz.step`](ht431crz.step) | 122 KB | You want the bare part, or you mark your own boards. |
| [`ht431crz-etched.step`](ht431crz-etched.step) | 1.6 MB | You want the part with `HT431CRZ` already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a
texture or a decal: 407 faces against 147 in the bare model. It
survives export, section views, and rendering in any CAD tool, and it drops straight
into KiCad or Fusion with no extra setup.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HTCSEMI datasheet](docs/ht431crz-datasheet.pdf) (6 pp, sha256 `0717f21d1e892efe`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ht431crz-datasheet.pdf)