main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ht431crz: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ht431crz: viewers · Ray
ht431crz-etched.fit.json ht431crz: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ht431crz-etched.glb ht431crz: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ht431crz-etched.step ht431crz: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ht431crz.glb Publish 0.1.0 · Ray
ht431crz.kicad_mod Publish 0.1.0 · Ray
ht431crz.kicad_sym Publish 0.1.0 · Ray
ht431crz.lbr Publish 0.1.0 · Ray
ht431crz.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
page.json ht431crz: specified limits as data (metadata.characteristics, 19 rows from the datasheet) · Ray
README.md ht431crz: specified limits as data (metadata.characteristics, 19 rows from the datasheet) · Ray

HT431CRZ

HTCSEMI · Voltage Reference · SOP-8

HT431CRZ from HTCSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 REF input Reference input. High-impedance sense input compared internally against the 2.495 V bandgap. Cathode current is regulated so that V(REF) tracks VREF (~2.495 V). Typical reference input current 1.8 µA (max 4 µA).
2 CATHODE power_in Cathode (K). Regulated shunt terminal; sinks current from the load to hold V(REF) equal to the internal 2.495 V reference. Absolute max VKA = 44 V, IK continuous −100 to +150 mA, minimum current for regulation 0.5 mA (max).
3 ANODE power_in Anode (A). Common/return terminal, normally tied to circuit ground (or the low side of the sense divider). Carries the sum of cathode and reference currents.

Key specifications

Parameter Value
Manufacturer HTCSEMI
Package SOP-8
Category PMIC
Pins 3

Ordering variants

Same part, different packaging or reel option.

  • HT431CRZ

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Reference Input Voltage (HT431C 2%) VREF 2.44 2.495 2.55 V VKA = VREF, IK = 10mA 2
Deviation of Reference Input Voltage Over Full Temperature Range VREF(dev) 3 17 MV Tmin Ta Tmax 2
Ratio of Change in Reference Input Voltage to Change in Cathode Voltage dVREF/dVKA -1.4 -2.7 mV/V VKA = 10V-VREF 2
Ratio of Change in Reference Input Voltage to Change in Cathode Voltage dVREF/dVKA -1 -2 mV/V VKA = 36V-10V 2
Reference Input Current IREF 1.8 4 ㎂ R1 = 10K, R2 = (value not legible in text) 2
Deviation of Reference Input Current Over Full Temperature Range IREF(dev) 0.4 1.2 ㎂ R1 = 10K, R2 = (value not legible in text) 2
Minimum Cathode Current for Regulation IK(min) 0.25 0.5 mA 2
Off-State Cathode Current IK(off) 0.26 0.9 ㎂ VKA = 40 V, VREF = 0 2
Dynamic Impedance ZKA 0.22 0.5 IK = 10mA to 100 mA, f 1.0KHz 2
Cathode Voltage VKA 40 V Recommended minimum is VREF (not a numeric value) 2
Cathode Current IK 0.5 100 mA 2
Cathode Voltage VKA 44 V 1
Cathode Current Range (Continuous) IK -100 150 mA Continuous 1
Reference Input Current Range IREF 0.05 10 mA 1
Power Dissipation at 25oC (SOP, TO-92 package) PD 0.7 W Ta = 25oC, SOP, TO-92 package 1
Junction Temperature Range TJ -25 150 oC 1
Operating Temperature Range Tg -25 85 oC Operating temperature range 1
Storage Temperature Range Tstg -65 150 oC 1
Thermal Resistance Junction to Ambient RJA 178 oC/W SOP, TO-92 package 1

CAD (KiCad official)

  • Symbol: HT431CRZ
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: ht431crz-etched.step / ht431crz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ht431crz.step / ht431crz.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
ht431crz.step 122 KB You want the bare part, or you mark your own boards.
ht431crz-etched.step 1.6 MB You want the part with HT431CRZ already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 407 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HTCSEMI datasheet (6 pp, sha256 0717f21d1e892efe, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF