main
Ray
ht431brz: specified limits as data (metadata.characteristics, 19 rows from the datasheet)
c48fa9b
HT431BRZ
HTCSEMI · Voltage Reference · SOP-8
HT431BRZ from HTCSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REFERENCE | input | Reference (R) input to the internal error amplifier's non-inverting input (compared against the internal 2.495 V bandgap). External resistor divider from cathode to anode sets the programmed regulation voltage: VKA = VREF x (1 + R1/R2) + IREF x R1. Input current ~1.8 μA typ (4 μA max). |
| 2 | ANODE | power_in | Anode (A) - the low-side/return terminal of the shunt reference, referenced to circuit ground in a typical shunt-regulator topology. Internal error-amp emitter/reference return. |
| 3 | CATHODE | output | Cathode (K) - high-side shunt terminal that sinks current to regulate VKA. Cathode voltage rating 44 V max (operating up to 40 V); continuous cathode current -100 to +150 mA absolute max, 0.5-100 mA recommended for regulation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTCSEMI |
| Package | SOP-8 |
| Category | PMIC |
| Pins | 3 |
Ordering variants
Same part, different packaging or reel option.
HT431BRZRHT431BRZ
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reference Input Voltage | VREF | 2.47 | 2.495 | 2.52 | V | VKA = VREF, IK = 10mA (HT431B 1%) | 2 |
| Deviation of Reference Input Voltage Over Full Temperature Range | VREF(dev) | 3 | 17 | MV | Tmin Ta Tmax | 2 | |
| Ratio of Change in Reference Input Voltage to Change in Cathode Voltage | VREF/VKA | -1.4 | -2.7 | mV/V | VKA = 10V-VREF | 2 | |
| Ratio of Change in Reference Input Voltage to Change in Cathode Voltage | VREF/VKA | -1 | -2 | mV/V | VKA = 36V- 10V | 2 | |
| Reference Input Current | IREF | 1.8 | 4 | ㎂ | R1 = 10K, R2 = | 2 | |
| Deviation of Reference Input Current Over Full Temperature Range | IREF(dev) | 0.4 | 1.2 | ㎂ | R1 = 10K, R2 = | 2 | |
| Minimum Cathode Current for Regulation | IK(min) | 0.25 | 0.5 | mA | 2 | ||
| Off-State Cathode Current | IK(off) | 0.26 | 0.9 | ㎂ | VKA = 40 V, VREF = 0 | 2 | |
| Dynamic Impedance | ZKA | 0.22 | 0.5 | IK = 10mA to 100 mA, f 1.0KHz | 2 | ||
| Cathode Voltage | VKA | 40 | V | min is VREF (not numeric) | 2 | ||
| Cathode Current | IK | 0.5 | 100 | mA | 2 | ||
| Cathode Voltage | VKA | 44 | V | 1 | |||
| Cathode Current Range (Continuous) | IK | -100 | 150 | mA | Continuous | 1 | |
| Reference Input Current Range | IREF | 0.05 | 10 | mA | 1 | ||
| Power Dissipation | PD | 0.7 | W | at 25oC, SOP, TO-92 package (RJA = 178oC/W) | 1 | ||
| Junction Temperature Range | TJ | -25 | 150 | oC | 1 | ||
| Operating Temperature Range | Tg | -25 | 85 | oC | Operating temperature range applies unless otherwise specified | 1 | |
| Storage Temperature Range | Tstg | -65 | 150 | oC | 1 | ||
| Thermal Resistance Junction to Ambient (SOP) | RJA | 178 | oC/W | SOP, TO-92 package | 1 |
CAD (KiCad official)
- Symbol:
HT431BRZ - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
ht431brz-etched.step/ht431brz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ht431brz.step/ht431brz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HTCSEMI datasheet (6 pp, sha256
0717f21d1e892efe, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HT431BRZ
**HTCSEMI** · Voltage Reference · SOP-8
HT431BRZ from HTCSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REFERENCE | input | Reference (R) input to the internal error amplifier's non-inverting input (compared against the internal 2.495 V bandgap). External resistor divider from cathode to anode sets the programmed regulation voltage: VKA = VREF x (1 + R1/R2) + IREF x R1. Input current ~1.8 μA typ (4 μA max). |
| 2 | ANODE | power_in | Anode (A) - the low-side/return terminal of the shunt reference, referenced to circuit ground in a typical shunt-regulator topology. Internal error-amp emitter/reference return. |
| 3 | CATHODE | output | Cathode (K) - high-side shunt terminal that sinks current to regulate VKA. Cathode voltage rating 44 V max (operating up to 40 V); continuous cathode current -100 to +150 mA absolute max, 0.5-100 mA recommended for regulation. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTCSEMI |
| Package | SOP-8 |
| Category | PMIC |
| Pins | 3 |
## Ordering variants
Same part, different packaging or reel option.
- `HT431BRZR`
- `HT431BRZ`
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reference Input Voltage | VREF | 2.47 | 2.495 | 2.52 | V | VKA = VREF, IK = 10mA (HT431B 1%) | 2 |
| Deviation of Reference Input Voltage Over Full Temperature Range | VREF(dev) | | 3 | 17 | MV | Tmin Ta Tmax | 2 |
| Ratio of Change in Reference Input Voltage to Change in Cathode Voltage | VREF/VKA | | -1.4 | -2.7 | mV/V | VKA = 10V-VREF | 2 |
| Ratio of Change in Reference Input Voltage to Change in Cathode Voltage | VREF/VKA | | -1 | -2 | mV/V | VKA = 36V- 10V | 2 |
| Reference Input Current | IREF | | 1.8 | 4 | ㎂ | R1 = 10K, R2 = | 2 |
| Deviation of Reference Input Current Over Full Temperature Range | IREF(dev) | | 0.4 | 1.2 | ㎂ | R1 = 10K, R2 = | 2 |
| Minimum Cathode Current for Regulation | IK(min) | | 0.25 | 0.5 | mA | | 2 |
| Off-State Cathode Current | IK(off) | | 0.26 | 0.9 | ㎂ | VKA = 40 V, VREF = 0 | 2 |
| Dynamic Impedance | ZKA | | 0.22 | 0.5 | | IK = 10mA to 100 mA, f 1.0KHz | 2 |
| Cathode Voltage | VKA | | | 40 | V | min is VREF (not numeric) | 2 |
| Cathode Current | IK | 0.5 | | 100 | mA | | 2 |
| Cathode Voltage | VKA | | | 44 | V | | 1 |
| Cathode Current Range (Continuous) | IK | -100 | | 150 | mA | Continuous | 1 |
| Reference Input Current Range | IREF | 0.05 | | 10 | mA | | 1 |
| Power Dissipation | PD | | | 0.7 | W | at 25oC, SOP, TO-92 package (RJA = 178oC/W) | 1 |
| Junction Temperature Range | TJ | -25 | | 150 | oC | | 1 |
| Operating Temperature Range | Tg | -25 | | 85 | oC | Operating temperature range applies unless otherwise specified | 1 |
| Storage Temperature Range | Tstg | -65 | | 150 | oC | | 1 |
| Thermal Resistance Junction to Ambient (SOP) | RJA | | 178 | | oC/W | SOP, TO-92 package | 1 |
## CAD (KiCad official)
- Symbol: `HT431BRZ`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `ht431brz-etched.step` / `ht431brz-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ht431brz.step` / `ht431brz.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HTCSEMI datasheet](docs/ht431brz-datasheet.pdf) (6 pp, sha256 `0717f21d1e892efe`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ht431brz-datasheet.pdf)