Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

HT431BRZ

HTCSEMI · Voltage Reference · SOP-8

HT431BRZ from HTCSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 REFERENCE input Reference (R) input to the internal error amplifier's non-inverting input (compared against the internal 2.495 V bandgap). External resistor divider from cathode to anode sets the programmed regulation voltage: VKA = VREF x (1 + R1/R2) + IREF x R1. Input current ~1.8 μA typ (4 μA max).
2 ANODE power_in Anode (A) - the low-side/return terminal of the shunt reference, referenced to circuit ground in a typical shunt-regulator topology. Internal error-amp emitter/reference return.
3 CATHODE output Cathode (K) - high-side shunt terminal that sinks current to regulate VKA. Cathode voltage rating 44 V max (operating up to 40 V); continuous cathode current -100 to +150 mA absolute max, 0.5-100 mA recommended for regulation.

Key specifications

Parameter Value
Manufacturer HTCSEMI
Package SOP-8
Category PMIC
Pins 3

Ordering variants

Same part, different packaging or reel option.

  • HT431BRZR
  • HT431BRZ

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Reference Input Voltage VREF 2.47 2.495 2.52 V VKA = VREF, IK = 10mA (HT431B 1%) 2
Deviation of Reference Input Voltage Over Full Temperature Range VREF(dev) 3 17 MV Tmin Ta Tmax 2
Ratio of Change in Reference Input Voltage to Change in Cathode Voltage VREF/VKA -1.4 -2.7 mV/V VKA = 10V-VREF 2
Ratio of Change in Reference Input Voltage to Change in Cathode Voltage VREF/VKA -1 -2 mV/V VKA = 36V- 10V 2
Reference Input Current IREF 1.8 4 ㎂ R1 = 10K, R2 = 2
Deviation of Reference Input Current Over Full Temperature Range IREF(dev) 0.4 1.2 ㎂ R1 = 10K, R2 = 2
Minimum Cathode Current for Regulation IK(min) 0.25 0.5 mA 2
Off-State Cathode Current IK(off) 0.26 0.9 ㎂ VKA = 40 V, VREF = 0 2
Dynamic Impedance ZKA 0.22 0.5 IK = 10mA to 100 mA, f 1.0KHz 2
Cathode Voltage VKA 40 V min is VREF (not numeric) 2
Cathode Current IK 0.5 100 mA 2
Cathode Voltage VKA 44 V 1
Cathode Current Range (Continuous) IK -100 150 mA Continuous 1
Reference Input Current Range IREF 0.05 10 mA 1
Power Dissipation PD 0.7 W at 25oC, SOP, TO-92 package (RJA = 178oC/W) 1
Junction Temperature Range TJ -25 150 oC 1
Operating Temperature Range Tg -25 85 oC Operating temperature range applies unless otherwise specified 1
Storage Temperature Range Tstg -65 150 oC 1
Thermal Resistance Junction to Ambient (SOP) RJA 178 oC/W SOP, TO-92 package 1

CAD (KiCad official)

  • Symbol: HT431BRZ
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: ht431brz-etched.step / ht431brz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ht431brz.step / ht431brz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HTCSEMI datasheet (6 pp, sha256 0717f21d1e892efe, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF