main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ht358vrz: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ht358vrz: viewers · Ray
ht358vrz-etched.fit.json ht358vrz: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ht358vrz-etched.glb ht358vrz: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ht358vrz-etched.step ht358vrz: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ht358vrz.glb Publish 0.1.0 · Ray
ht358vrz.kicad_mod Publish 0.1.0 · Ray
ht358vrz.kicad_sym Publish 0.1.0 · Ray
ht358vrz.lbr Publish 0.1.0 · Ray
ht358vrz.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json ht358vrz: specified limits as data (metadata.characteristics, 49 rows from the datasheet) · Ray
README.md ht358vrz: specified limits as data (metadata.characteristics, 49 rows from the datasheet) · Ray

HT358VRZ

HTCSEMI · Operational Amplifier · SOP-8

HT358VRZ from HTCSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT1 output Output of amplifier 1. Rail-to-rail push-pull output; maximum output current approximately 48 mA (short-circuit).
2 IN1- input Inverting input of amplifier 1. High-impedance input; typical input bias current 10 nA at VCC = 2.7 V (16 nA at VCC = 5 V).
3 IN1+ input Non-inverting input of amplifier 1. Rail-to-rail common-mode input range extended from VDD - 0.2 V to VCC + 0.2 V at 25 °C.
4 VDD power_in Negative supply rail / ground reference for both amplifiers. Typically tied to 0 V (GND) in single-supply operation; supply range VCC - VDD = 2.7 V to 6 V.
5 IN2+ input Non-inverting input of amplifier 2. Rail-to-rail common-mode input range extended from VDD - 0.2 V to VCC + 0.2 V at 25 °C.
6 IN2- input Inverting input of amplifier 2. High-impedance input; typical input bias current 10 nA at VCC = 2.7 V (16 nA at VCC = 5 V).
7 OUT2 output Output of amplifier 2. Rail-to-rail push-pull output; maximum output current approximately 48 mA (short-circuit).
8 VCC power_in Positive supply rail for both amplifiers. Operating range 2.7 V to 6 V; absolute maximum 7 V. Bypass with a local decoupling capacitor to VDD.

Key specifications

Parameter Value
Manufacturer HTCSEMI
Package SOP-8
Category Op-amp/Cmp
Pins 8

Ordering variants

  • HT358VRZ
  • HT358VRZHT358VRTZ

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage @ VCC=2.7 V Vio 0.1 3 mV Vicm = Vout = VCC/2 4
Input offset voltage over temperature @ VCC=2.7 V Vio 6 mV Tmin ≤ Tamb ≤ Tmax 4
Input offset current @ VCC=2.7 V Iio 1 9 nA Vicm = Vout = VCC/2 (1) 4
Input offset current over temperature @ VCC=2.7 V Iio 25 nA Tmin ≤ Tamb ≤ Tmax 4
Input bias current @ VCC=2.7 V Iib 10 50 nA Vicm = Vout = VCC/2 (1) 4
Input bias current over temperature @ VCC=2.7 V Iib 85 nA Tmin ≤ Tamb ≤ Tmax 4
Common mode rejection ratio @ VCC=2.7 V CMR 55 85 dB 0 ≤ Vicm ≤ VCC 4
Supply voltage rejection ratio @ VCC=2.7 V SVR 70 80 dB Vicm = VCC/2 4
Large signal voltage gain @ VCC=2.7 V, RL=10 kΩ Avd 80 100 dB Vout = 0.5 V to 2.2 V, RL = 10 kΩ 4
Large signal voltage gain @ VCC=2.7 V, RL=2 kΩ Avd 70 88 dB Vout = 0.5 V to 2.2 V, RL = 2 kΩ 4
High level output voltage @ VCC=2.7 V VOH 2.6 2.65 V Vid = 100 mV, Tmin ≤ Tamb ≤ Tmax, RL = 10 kΩ 4
High level output voltage @ VCC=2.7 V VOH 2.55 2.6 V Vid = 100 mV, Tmin ≤ Tamb ≤ Tmax, RL = 2 kΩ 4
Low level output voltage @ VCC=2.7 V VOL 15 90 mV Vid = -100 mV, Tmin ≤ Tamb ≤ Tmax, RL = 10 kΩ 4
Low level output voltage @ VCC=2.7 V VOL 50 100 mV Vid = -100 mV, Tmin ≤ Tamb ≤ Tmax, RL = 2 kΩ 4
Output source current @ VCC=2.7 V Io 5 46 mA Vid = 100 mV, VO = VDD 4
Output sink current @ VCC=2.7 V Io 5 46 mA Vid = -100 mV, VO = VCC 4
Supply current (per amplifier) @ VCC=2.7 V ICC 145 200 µA Vout = VCC/2, AVCL = 1, no load 4
Supply current (per amplifier) over temperature @ VCC=2.7 V ICC 230 µA Tmin ≤ Tamb ≤ Tmax 4
Input offset voltage @ VCC=5 V Vio 0.1 3 mV Vicm = Vout = VCC/2 5
Input offset voltage over temperature @ VCC=5 V Vio 6 mV Tmin ≤ Tamb ≤ Tmax 5
Input offset current @ VCC=5 V Iio 1 9 nA Vicm = Vout = VCC/2 (1) 5
Input offset current over temperature @ VCC=5 V Iio 25 nA Tmin ≤ Tamb ≤ Tmax 5
Input bias current @ VCC=5 V Iib 16 63 nA Vicm = Vout = VCC/2 (1) 5
Input bias current over temperature @ VCC=5 V Iib 95 nA Tmin ≤ Tamb ≤ Tmax 5
Common mode rejection ratio @ VCC=5 V CMR 65 95 dB 0 ≤ Vicm ≤ VCC 5
Supply voltage rejection ratio @ VCC=5 V SVR 70 90 dB Vicm = VCC/2 5
Large signal voltage gain @ VCC=5 V, RL=10 kΩ Avd 85 97 dB Vout = 0.5 V to 4.5 V, RL = 10 kΩ 5
Large signal voltage gain @ VCC=5 V, RL=2 kΩ Avd 77 93 dB Vout = 0.5 V to 4.5 V, RL = 2 kΩ 5
High level output voltage @ VCC=5 V VOH 4.85 4.95 V Vid = 100 mV, Tmin ≤ Tamb ≤ Tmax, RL = 10 kΩ 5
High level output voltage @ VCC=5 V VOH 4.8 4.91 V Vid = 100 mV, Tmin ≤ Tamb ≤ Tmax, RL = 2 kΩ 5
Low level output voltage @ VCC=5 V VOL 40 180 mV Vid = -100 mV, Tmin ≤ Tamb ≤ Tmax, RL = 10 kΩ 5
Low level output voltage @ VCC=5 V VOL 80 200 mV Vid = -100 mV, Tmin ≤ Tamb ≤ Tmax, RL = 2 kΩ 5
Output source current @ VCC=5 V Io 7 48 mA Vid = 100 mV, VO = VDD 5
Output sink current @ VCC=5 V Io 7 48 mA Vid = -100 mV, VO = VCC 5
Supply current (per amplifier) @ VCC=5 V ICC 162 220 µA Vout = VCC/2, AVCL = 1, no load 5
Supply current (per amplifier) over temperature @ VCC=5 V ICC 250 µA Tmin ≤ Tamb ≤ Tmax 5
Supply voltage VCC 2.7 6 V 3
Operating free air temperature range Toper -40 125 °C 3
Supply voltage VCC 7 V All voltage values except differential voltage are with respect to network terminal 2
Differential input voltage Vid -1 1 V If Vid > ±1 V, the maximum input current must not exceed ±1 mA 2
Operating free air temperature range Toper -40 125 °C 2
Storage temperature Tstg -65 150 °C 2
Maximum junction temperature Tj 150 °C 2
Lead temperature (soldering, 10 s) 250 °C Soldering, 10 s 2
ESD human body model (HBM) 2 kV Human body model 2
ESD machine model (MM) 200 V Machine model 2
ESD charged device model (CDM) 1.5 kV Charged device model 2
Thermal resistance junction-to-ambient (SO8) Rthja 125 °C/W SO8 package 2
Thermal resistance junction-to-case (SO8) Rthjc 40 °C/W SO8 package 2

CAD (KiCad official)

  • Symbol: HT358VRZ
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: ht358vrz-etched.step / ht358vrz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ht358vrz.step / ht358vrz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HTCSEMI datasheet (None pp, sha256 185e4cc4ff348100, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF