3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownHT358VRZ
HTCSEMI · Operational Amplifier · SOP-8
HT358VRZ from HTCSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Output of amplifier 1. Rail-to-rail push-pull output; maximum output current approximately 48 mA (short-circuit). |
| 2 | IN1- | input | Inverting input of amplifier 1. High-impedance input; typical input bias current 10 nA at VCC = 2.7 V (16 nA at VCC = 5 V). |
| 3 | IN1+ | input | Non-inverting input of amplifier 1. Rail-to-rail common-mode input range extended from VDD - 0.2 V to VCC + 0.2 V at 25 °C. |
| 4 | VDD | power_in | Negative supply rail / ground reference for both amplifiers. Typically tied to 0 V (GND) in single-supply operation; supply range VCC - VDD = 2.7 V to 6 V. |
| 5 | IN2+ | input | Non-inverting input of amplifier 2. Rail-to-rail common-mode input range extended from VDD - 0.2 V to VCC + 0.2 V at 25 °C. |
| 6 | IN2- | input | Inverting input of amplifier 2. High-impedance input; typical input bias current 10 nA at VCC = 2.7 V (16 nA at VCC = 5 V). |
| 7 | OUT2 | output | Output of amplifier 2. Rail-to-rail push-pull output; maximum output current approximately 48 mA (short-circuit). |
| 8 | VCC | power_in | Positive supply rail for both amplifiers. Operating range 2.7 V to 6 V; absolute maximum 7 V. Bypass with a local decoupling capacitor to VDD. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTCSEMI |
| Package | SOP-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
Ordering variants
HT358VRZHT358VRZHT358VRTZ
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage @ VCC=2.7 V | Vio | 0.1 | 3 | mV | Vicm = Vout = VCC/2 | 4 | |
| Input offset voltage over temperature @ VCC=2.7 V | Vio | 6 | mV | Tmin ≤ Tamb ≤ Tmax | 4 | ||
| Input offset current @ VCC=2.7 V | Iio | 1 | 9 | nA | Vicm = Vout = VCC/2 (1) | 4 | |
| Input offset current over temperature @ VCC=2.7 V | Iio | 25 | nA | Tmin ≤ Tamb ≤ Tmax | 4 | ||
| Input bias current @ VCC=2.7 V | Iib | 10 | 50 | nA | Vicm = Vout = VCC/2 (1) | 4 | |
| Input bias current over temperature @ VCC=2.7 V | Iib | 85 | nA | Tmin ≤ Tamb ≤ Tmax | 4 | ||
| Common mode rejection ratio @ VCC=2.7 V | CMR | 55 | 85 | dB | 0 ≤ Vicm ≤ VCC | 4 | |
| Supply voltage rejection ratio @ VCC=2.7 V | SVR | 70 | 80 | dB | Vicm = VCC/2 | 4 | |
| Large signal voltage gain @ VCC=2.7 V, RL=10 kΩ | Avd | 80 | 100 | dB | Vout = 0.5 V to 2.2 V, RL = 10 kΩ | 4 | |
| Large signal voltage gain @ VCC=2.7 V, RL=2 kΩ | Avd | 70 | 88 | dB | Vout = 0.5 V to 2.2 V, RL = 2 kΩ | 4 | |
| High level output voltage @ VCC=2.7 V | VOH | 2.6 | 2.65 | V | Vid = 100 mV, Tmin ≤ Tamb ≤ Tmax, RL = 10 kΩ | 4 | |
| High level output voltage @ VCC=2.7 V | VOH | 2.55 | 2.6 | V | Vid = 100 mV, Tmin ≤ Tamb ≤ Tmax, RL = 2 kΩ | 4 | |
| Low level output voltage @ VCC=2.7 V | VOL | 15 | 90 | mV | Vid = -100 mV, Tmin ≤ Tamb ≤ Tmax, RL = 10 kΩ | 4 | |
| Low level output voltage @ VCC=2.7 V | VOL | 50 | 100 | mV | Vid = -100 mV, Tmin ≤ Tamb ≤ Tmax, RL = 2 kΩ | 4 | |
| Output source current @ VCC=2.7 V | Io | 5 | 46 | mA | Vid = 100 mV, VO = VDD | 4 | |
| Output sink current @ VCC=2.7 V | Io | 5 | 46 | mA | Vid = -100 mV, VO = VCC | 4 | |
| Supply current (per amplifier) @ VCC=2.7 V | ICC | 145 | 200 | µA | Vout = VCC/2, AVCL = 1, no load | 4 | |
| Supply current (per amplifier) over temperature @ VCC=2.7 V | ICC | 230 | µA | Tmin ≤ Tamb ≤ Tmax | 4 | ||
| Input offset voltage @ VCC=5 V | Vio | 0.1 | 3 | mV | Vicm = Vout = VCC/2 | 5 | |
| Input offset voltage over temperature @ VCC=5 V | Vio | 6 | mV | Tmin ≤ Tamb ≤ Tmax | 5 | ||
| Input offset current @ VCC=5 V | Iio | 1 | 9 | nA | Vicm = Vout = VCC/2 (1) | 5 | |
| Input offset current over temperature @ VCC=5 V | Iio | 25 | nA | Tmin ≤ Tamb ≤ Tmax | 5 | ||
| Input bias current @ VCC=5 V | Iib | 16 | 63 | nA | Vicm = Vout = VCC/2 (1) | 5 | |
| Input bias current over temperature @ VCC=5 V | Iib | 95 | nA | Tmin ≤ Tamb ≤ Tmax | 5 | ||
| Common mode rejection ratio @ VCC=5 V | CMR | 65 | 95 | dB | 0 ≤ Vicm ≤ VCC | 5 | |
| Supply voltage rejection ratio @ VCC=5 V | SVR | 70 | 90 | dB | Vicm = VCC/2 | 5 | |
| Large signal voltage gain @ VCC=5 V, RL=10 kΩ | Avd | 85 | 97 | dB | Vout = 0.5 V to 4.5 V, RL = 10 kΩ | 5 | |
| Large signal voltage gain @ VCC=5 V, RL=2 kΩ | Avd | 77 | 93 | dB | Vout = 0.5 V to 4.5 V, RL = 2 kΩ | 5 | |
| High level output voltage @ VCC=5 V | VOH | 4.85 | 4.95 | V | Vid = 100 mV, Tmin ≤ Tamb ≤ Tmax, RL = 10 kΩ | 5 | |
| High level output voltage @ VCC=5 V | VOH | 4.8 | 4.91 | V | Vid = 100 mV, Tmin ≤ Tamb ≤ Tmax, RL = 2 kΩ | 5 | |
| Low level output voltage @ VCC=5 V | VOL | 40 | 180 | mV | Vid = -100 mV, Tmin ≤ Tamb ≤ Tmax, RL = 10 kΩ | 5 | |
| Low level output voltage @ VCC=5 V | VOL | 80 | 200 | mV | Vid = -100 mV, Tmin ≤ Tamb ≤ Tmax, RL = 2 kΩ | 5 | |
| Output source current @ VCC=5 V | Io | 7 | 48 | mA | Vid = 100 mV, VO = VDD | 5 | |
| Output sink current @ VCC=5 V | Io | 7 | 48 | mA | Vid = -100 mV, VO = VCC | 5 | |
| Supply current (per amplifier) @ VCC=5 V | ICC | 162 | 220 | µA | Vout = VCC/2, AVCL = 1, no load | 5 | |
| Supply current (per amplifier) over temperature @ VCC=5 V | ICC | 250 | µA | Tmin ≤ Tamb ≤ Tmax | 5 | ||
| Supply voltage | VCC | 2.7 | 6 | V | 3 | ||
| Operating free air temperature range | Toper | -40 | 125 | °C | 3 | ||
| Supply voltage | VCC | 7 | V | All voltage values except differential voltage are with respect to network terminal | 2 | ||
| Differential input voltage | Vid | -1 | 1 | V | If Vid > ±1 V, the maximum input current must not exceed ±1 mA | 2 | |
| Operating free air temperature range | Toper | -40 | 125 | °C | 2 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 2 | ||
| Maximum junction temperature | Tj | 150 | °C | 2 | |||
| Lead temperature (soldering, 10 s) | 250 | °C | Soldering, 10 s | 2 | |||
| ESD human body model (HBM) | 2 | kV | Human body model | 2 | |||
| ESD machine model (MM) | 200 | V | Machine model | 2 | |||
| ESD charged device model (CDM) | 1.5 | kV | Charged device model | 2 | |||
| Thermal resistance junction-to-ambient (SO8) | Rthja | 125 | °C/W | SO8 package | 2 | ||
| Thermal resistance junction-to-case (SO8) | Rthjc | 40 | °C/W | SO8 package | 2 |
CAD (KiCad official)
- Symbol:
HT358VRZ - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
ht358vrz-etched.step/ht358vrz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ht358vrz.step/ht358vrz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HTCSEMI datasheet (None pp, sha256
185e4cc4ff348100, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.