main
Ray
Publish 0.1.0
f9a4c93
HT3485EBRZ
HTCSEMI · RS-485 / RS-422 ICs · SOP-8
HT3485EBRZ from HTCSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output: logic high when A-B >= +0.2V, logic low when A-B <= -0.2V, high if the inputs are open; high impedance when RE is high. |
| 2 | RE | input | Receiver output enable, active low: RO is enabled when RE is low and high-impedance when RE is high (input high min 2.0V, input low max 0.8V). |
| 3 | DE | input | Driver output enable: driver outputs are active when DE is high and high-impedance when DE is low (input high min 2.0V, input low max 0.8V). |
| 4 | DI | input | Driver input: a low on DI forces the non-inverting output low and the inverting output high, and a high does the opposite when the driver is enabled (-0.3V to 7V). |
| 5 | GND | power_in | Ground, the reference for all voltages. |
| 6 | A | bidirectional | Non-inverting receiver input and driver output on the RS-485/RS-422 bus, with a -7V to +12V common-mode input range and a -7.5V to +12.5V absolute maximum. |
| 7 | B | bidirectional | Inverting receiver input and driver output on the RS-485/RS-422 bus, with a -7V to +12V common-mode input range and a -7.5V to +12.5V absolute maximum. |
| 8 | VCC | power_in | Positive supply, a single 3.3V ±0.3V with an absolute maximum of 7V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTCSEMI |
| Package | SOP-8 |
| Category | Interface |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (VCC) | VCC | 7 | V | 2 | |||
| Control Input Voltage | -0.3 | 7 | V | 2 | |||
| Driver Input Voltage (DI) | DI | -0.3 | 7 | V | 2 | ||
| Driver Output Voltage (A, B) | -7.5 | 12.5 | V | 2 | |||
| Receiver Input Voltage (A, B) | -7.5 | 12.5 | V | 2 | |||
| Receiver Output Voltage (RO) | RO | -0.3 | V | upper limit printed as (VCC+0.3V), no number given | 2 | ||
| Storage Temperature Range | -65 | 160 | °C | 2 | |||
| Lead Temperature (soldering) | 300 | °C | soldering, 10sec | 2 | |||
| Continuous Power Dissipation (8-Pin SOP) | 471 | mW | TA = +70°C; 8-Pin SOP derated 5.88mW/°C above +70°C | 2 | |||
| Operating Temperature Range | TA | -40 | 85 | °C | 2 | ||
| Input High Voltage | VIH | 2 | V | DE, DI, RE | 2 | ||
| Input Low Voltage | VIL | 0.8 | V | DE, DI, RE | 2 | ||
| Input Current | IIN1 | -2 | 2 | µA | DE, DI, RE | 2 | |
| Input Current (A, B) | IIN2 | 1 | mA | DE = 0V; VIN = 12V | 2 | ||
| Input Current (A, B) | IIN2 | -0.8 | mA | VCC = 0V or 3.35V VIN = -7V | 2 | ||
| Receiver Differential Threshold Voltage | VTH | -0.2 | 0.2 | V | VCM range printed garbled in source text | 2 | |
| Three-State (high impedance) Output Current at Receiver | IOZR | -1 | 1 | µA | 2 | ||
| Receiver Output High Voltage | VOH | 2.5 | V | IO = -1.5mA, VID = 200mV | 2 | ||
| Receiver Output Low Voltage | VOL | 0.4 | V | IO = 2.5mA, VID = -200mV | 2 | ||
| Change in Magnitude of Driver Differential Output Voltage for Complementary Output States | ΔVOD | 0.2 | V | R = 54Ω or 50Ω, Figure 4 | 2 | ||
| Change in Magnitude of Driver Common-Mode Output Voltage for Complementary Output States | ΔVOC | 0.2 | V | R = 54Ω or 100Ω, Figure 4 | 2 | ||
| Differential Driver Output (with load), RS-422 row | VOD2 | 1 | V | R = 10Ω (RS-422) as printed; source text garbled | 2 | ||
| Differential Driver Output (with load), RS-485 row | VOD2 | 0.8 | V | R = 54Ω (RS-485), Figure 4 | 2 | ||
| No-Load Supply Current | ICC | 500 | 800 | µA | DE = VCC | 3 | |
| No-Load Supply Current | ICC | 300 | 400 | µA | RE = 0V or VCC, DE = 0V | 3 | |
| Driver Short-Circuit Current, VO = High | IOSD1 | 250 | mA | VO = High | 3 | ||
| Driver Short-Circuit Current, VO = Low | IOSD2 | 250 | mA | VO = Low | 3 | ||
| ESD Protection (A, B, Y and Z pins) | 15 | kV | tested using Human Body Model; A, B, Y and Z pins | 3 | |||
| Receiver Input Resistance | RIN | 12 | kΩ | 2 | |||
| Driver Input to Output (tPLH) | tPLH | 10 | 80 | 100 | ns | RDIFF = 54Ω, CL1 = CL2 = 100pF | 3 |
| Driver Input to Output (tPHL) | tPHL | 10 | 80 | 100 | ns | CL1 = CL2 = 100pF | 3 |
| Driver Output Skew to Output | tSKEW | 5 | 10 | ns | RDIFF = 54Ω, CL1 = CL2 = 100pF | 3 | |
| Driver Enable to Output High | tZH | 55 | 80 | ns | CL = 100pF, S2 closed | 3 | |
| Driver Enable to Output Low | tZL | 55 | 80 | ns | CL = 100pF, S1 closed | 3 | |
| Driver Disable Time from Low | tLZ | 60 | 90 | ns | CL = 15pF, S1 closed | 3 | |
| Driver Disable Time from High | tHZ | 60 | 90 | ns | CL = 15pF, S2 closed | 3 | |
| Differential Propagation Delay Skew /tPLH - tPHL/ | tSKD | 13 | 20 | ns | RDIFF = 54Ω | 3 | |
| Receiver Input to Output (tPLH) | tPLH | 20 | 120 | 200 | ns | RDIFF = 54Ω, CL1 = CL2 = 100pF | 3 |
| Receiver Input to Output (tPHL) | tPHL | 20 | 120 | 200 | ns | RDIFF = 54Ω, CL1 = CL2 = 100pF | 3 |
| Receiver Skew /tPLH - tPHL/ | 5 | 10 | ns | CL1 = CL2 = 100pF | 3 | ||
| Receiver Enable to Output Low | tZL | 50 | 90 | ns | CRL = 15pF, S1 closed | 3 | |
| Receiver Enable to Output High | tZH | 50 | 90 | ns | CRL = 15pF, S2 closed | 3 | |
| Receiver Disable Time from Low | tLZ | 40 | 80 | ns | CRL = 15pF, S1 closed | 3 | |
| Receiver Disable Time from High | tHZ | 40 | 80 | ns | CRL = 15pF, S2 closed | 3 | |
| Maximum Data Rate | fMAX | 2.5 | 5 | 10 | Mbps | 3 | |
| Supply Voltage (test condition) | VCC | 3.3 | V | VCC = 3.3V ±0.3V, TA = TMIN to TMAX | 2 |
CAD (KiCad official)
- Symbol:
HT3485EBRZ - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
ht3485ebrz-etched.step/ht3485ebrz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ht3485ebrz.step/ht3485ebrz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HTCSEMI datasheet (8 pp, sha256
2bcf37c89b469cac, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HT3485EBRZ
**HTCSEMI** · RS-485 / RS-422 ICs · SOP-8
HT3485EBRZ from HTCSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output: logic high when A-B >= +0.2V, logic low when A-B <= -0.2V, high if the inputs are open; high impedance when RE is high. |
| 2 | RE | input | Receiver output enable, active low: RO is enabled when RE is low and high-impedance when RE is high (input high min 2.0V, input low max 0.8V). |
| 3 | DE | input | Driver output enable: driver outputs are active when DE is high and high-impedance when DE is low (input high min 2.0V, input low max 0.8V). |
| 4 | DI | input | Driver input: a low on DI forces the non-inverting output low and the inverting output high, and a high does the opposite when the driver is enabled (-0.3V to 7V). |
| 5 | GND | power_in | Ground, the reference for all voltages. |
| 6 | A | bidirectional | Non-inverting receiver input and driver output on the RS-485/RS-422 bus, with a -7V to +12V common-mode input range and a -7.5V to +12.5V absolute maximum. |
| 7 | B | bidirectional | Inverting receiver input and driver output on the RS-485/RS-422 bus, with a -7V to +12V common-mode input range and a -7.5V to +12.5V absolute maximum. |
| 8 | VCC | power_in | Positive supply, a single 3.3V ±0.3V with an absolute maximum of 7V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTCSEMI |
| Package | SOP-8 |
| Category | Interface |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (VCC) | VCC | | | 7 | V | | 2 |
| Control Input Voltage | | -0.3 | | 7 | V | | 2 |
| Driver Input Voltage (DI) | DI | -0.3 | | 7 | V | | 2 |
| Driver Output Voltage (A, B) | | -7.5 | | 12.5 | V | | 2 |
| Receiver Input Voltage (A, B) | | -7.5 | | 12.5 | V | | 2 |
| Receiver Output Voltage (RO) | RO | -0.3 | | | V | upper limit printed as (VCC+0.3V), no number given | 2 |
| Storage Temperature Range | | -65 | | 160 | °C | | 2 |
| Lead Temperature (soldering) | | | | 300 | °C | soldering, 10sec | 2 |
| Continuous Power Dissipation (8-Pin SOP) | | | | 471 | mW | TA = +70°C; 8-Pin SOP derated 5.88mW/°C above +70°C | 2 |
| Operating Temperature Range | TA | -40 | | 85 | °C | | 2 |
| Input High Voltage | VIH | 2 | | | V | DE, DI, RE | 2 |
| Input Low Voltage | VIL | | | 0.8 | V | DE, DI, RE | 2 |
| Input Current | IIN1 | -2 | | 2 | µA | DE, DI, RE | 2 |
| Input Current (A, B) | IIN2 | | | 1 | mA | DE = 0V; VIN = 12V | 2 |
| Input Current (A, B) | IIN2 | -0.8 | | | mA | VCC = 0V or 3.35V VIN = -7V | 2 |
| Receiver Differential Threshold Voltage | VTH | -0.2 | | 0.2 | V | VCM range printed garbled in source text | 2 |
| Three-State (high impedance) Output Current at Receiver | IOZR | -1 | | 1 | µA | | 2 |
| Receiver Output High Voltage | VOH | 2.5 | | | V | IO = -1.5mA, VID = 200mV | 2 |
| Receiver Output Low Voltage | VOL | | | 0.4 | V | IO = 2.5mA, VID = -200mV | 2 |
| Change in Magnitude of Driver Differential Output Voltage for Complementary Output States | ΔVOD | | | 0.2 | V | R = 54Ω or 50Ω, Figure 4 | 2 |
| Change in Magnitude of Driver Common-Mode Output Voltage for Complementary Output States | ΔVOC | | | 0.2 | V | R = 54Ω or 100Ω, Figure 4 | 2 |
| Differential Driver Output (with load), RS-422 row | VOD2 | 1 | | | V | R = 10Ω (RS-422) as printed; source text garbled | 2 |
| Differential Driver Output (with load), RS-485 row | VOD2 | 0.8 | | | V | R = 54Ω (RS-485), Figure 4 | 2 |
| No-Load Supply Current | ICC | | 500 | 800 | µA | DE = VCC | 3 |
| No-Load Supply Current | ICC | | 300 | 400 | µA | RE = 0V or VCC, DE = 0V | 3 |
| Driver Short-Circuit Current, VO = High | IOSD1 | | | 250 | mA | VO = High | 3 |
| Driver Short-Circuit Current, VO = Low | IOSD2 | | | 250 | mA | VO = Low | 3 |
| ESD Protection (A, B, Y and Z pins) | | 15 | | | kV | tested using Human Body Model; A, B, Y and Z pins | 3 |
| Receiver Input Resistance | RIN | 12 | | | kΩ | | 2 |
| Driver Input to Output (tPLH) | tPLH | 10 | 80 | 100 | ns | RDIFF = 54Ω, CL1 = CL2 = 100pF | 3 |
| Driver Input to Output (tPHL) | tPHL | 10 | 80 | 100 | ns | CL1 = CL2 = 100pF | 3 |
| Driver Output Skew to Output | tSKEW | | 5 | 10 | ns | RDIFF = 54Ω, CL1 = CL2 = 100pF | 3 |
| Driver Enable to Output High | tZH | | 55 | 80 | ns | CL = 100pF, S2 closed | 3 |
| Driver Enable to Output Low | tZL | | 55 | 80 | ns | CL = 100pF, S1 closed | 3 |
| Driver Disable Time from Low | tLZ | | 60 | 90 | ns | CL = 15pF, S1 closed | 3 |
| Driver Disable Time from High | tHZ | | 60 | 90 | ns | CL = 15pF, S2 closed | 3 |
| Differential Propagation Delay Skew /tPLH - tPHL/ | tSKD | | 13 | 20 | ns | RDIFF = 54Ω | 3 |
| Receiver Input to Output (tPLH) | tPLH | 20 | 120 | 200 | ns | RDIFF = 54Ω, CL1 = CL2 = 100pF | 3 |
| Receiver Input to Output (tPHL) | tPHL | 20 | 120 | 200 | ns | RDIFF = 54Ω, CL1 = CL2 = 100pF | 3 |
| Receiver Skew /tPLH - tPHL/ | | | 5 | 10 | ns | CL1 = CL2 = 100pF | 3 |
| Receiver Enable to Output Low | tZL | | 50 | 90 | ns | CRL = 15pF, S1 closed | 3 |
| Receiver Enable to Output High | tZH | | 50 | 90 | ns | CRL = 15pF, S2 closed | 3 |
| Receiver Disable Time from Low | tLZ | | 40 | 80 | ns | CRL = 15pF, S1 closed | 3 |
| Receiver Disable Time from High | tHZ | | 40 | 80 | ns | CRL = 15pF, S2 closed | 3 |
| Maximum Data Rate | fMAX | 2.5 | 5 | 10 | Mbps | | 3 |
| Supply Voltage (test condition) | VCC | | 3.3 | | V | VCC = 3.3V ±0.3V, TA = TMIN to TMAX | 2 |
## CAD (KiCad official)
- Symbol: `HT3485EBRZ`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `ht3485ebrz-etched.step` / `ht3485ebrz-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ht3485ebrz.step` / `ht3485ebrz.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HTCSEMI datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589040308381868032) (8 pp, sha256 `2bcf37c89b469cac`, retrieved 2026-10-18, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ht3485ebrz-datasheet.pdf)