Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

HT3485EBRZ

HTCSEMI · RS-485 / RS-422 ICs · SOP-8

HT3485EBRZ from HTCSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RO output Receiver output: logic high when A-B >= +0.2V, logic low when A-B <= -0.2V, high if the inputs are open; high impedance when RE is high.
2 RE input Receiver output enable, active low: RO is enabled when RE is low and high-impedance when RE is high (input high min 2.0V, input low max 0.8V).
3 DE input Driver output enable: driver outputs are active when DE is high and high-impedance when DE is low (input high min 2.0V, input low max 0.8V).
4 DI input Driver input: a low on DI forces the non-inverting output low and the inverting output high, and a high does the opposite when the driver is enabled (-0.3V to 7V).
5 GND power_in Ground, the reference for all voltages.
6 A bidirectional Non-inverting receiver input and driver output on the RS-485/RS-422 bus, with a -7V to +12V common-mode input range and a -7.5V to +12.5V absolute maximum.
7 B bidirectional Inverting receiver input and driver output on the RS-485/RS-422 bus, with a -7V to +12V common-mode input range and a -7.5V to +12.5V absolute maximum.
8 VCC power_in Positive supply, a single 3.3V ±0.3V with an absolute maximum of 7V.

Key specifications

Parameter Value
Manufacturer HTCSEMI
Package SOP-8
Category Interface
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage (VCC) VCC 7 V 2
Control Input Voltage -0.3 7 V 2
Driver Input Voltage (DI) DI -0.3 7 V 2
Driver Output Voltage (A, B) -7.5 12.5 V 2
Receiver Input Voltage (A, B) -7.5 12.5 V 2
Receiver Output Voltage (RO) RO -0.3 V upper limit printed as (VCC+0.3V), no number given 2
Storage Temperature Range -65 160 °C 2
Lead Temperature (soldering) 300 °C soldering, 10sec 2
Continuous Power Dissipation (8-Pin SOP) 471 mW TA = +70°C; 8-Pin SOP derated 5.88mW/°C above +70°C 2
Operating Temperature Range TA -40 85 °C 2
Input High Voltage VIH 2 V DE, DI, RE 2
Input Low Voltage VIL 0.8 V DE, DI, RE 2
Input Current IIN1 -2 2 µA DE, DI, RE 2
Input Current (A, B) IIN2 1 mA DE = 0V; VIN = 12V 2
Input Current (A, B) IIN2 -0.8 mA VCC = 0V or 3.35V VIN = -7V 2
Receiver Differential Threshold Voltage VTH -0.2 0.2 V VCM range printed garbled in source text 2
Three-State (high impedance) Output Current at Receiver IOZR -1 1 µA 2
Receiver Output High Voltage VOH 2.5 V IO = -1.5mA, VID = 200mV 2
Receiver Output Low Voltage VOL 0.4 V IO = 2.5mA, VID = -200mV 2
Change in Magnitude of Driver Differential Output Voltage for Complementary Output States ΔVOD 0.2 V R = 54Ω or 50Ω, Figure 4 2
Change in Magnitude of Driver Common-Mode Output Voltage for Complementary Output States ΔVOC 0.2 V R = 54Ω or 100Ω, Figure 4 2
Differential Driver Output (with load), RS-422 row VOD2 1 V R = 10Ω (RS-422) as printed; source text garbled 2
Differential Driver Output (with load), RS-485 row VOD2 0.8 V R = 54Ω (RS-485), Figure 4 2
No-Load Supply Current ICC 500 800 µA DE = VCC 3
No-Load Supply Current ICC 300 400 µA RE = 0V or VCC, DE = 0V 3
Driver Short-Circuit Current, VO = High IOSD1 250 mA VO = High 3
Driver Short-Circuit Current, VO = Low IOSD2 250 mA VO = Low 3
ESD Protection (A, B, Y and Z pins) 15 kV tested using Human Body Model; A, B, Y and Z pins 3
Receiver Input Resistance RIN 12 kΩ 2
Driver Input to Output (tPLH) tPLH 10 80 100 ns RDIFF = 54Ω, CL1 = CL2 = 100pF 3
Driver Input to Output (tPHL) tPHL 10 80 100 ns CL1 = CL2 = 100pF 3
Driver Output Skew to Output tSKEW 5 10 ns RDIFF = 54Ω, CL1 = CL2 = 100pF 3
Driver Enable to Output High tZH 55 80 ns CL = 100pF, S2 closed 3
Driver Enable to Output Low tZL 55 80 ns CL = 100pF, S1 closed 3
Driver Disable Time from Low tLZ 60 90 ns CL = 15pF, S1 closed 3
Driver Disable Time from High tHZ 60 90 ns CL = 15pF, S2 closed 3
Differential Propagation Delay Skew /tPLH - tPHL/ tSKD 13 20 ns RDIFF = 54Ω 3
Receiver Input to Output (tPLH) tPLH 20 120 200 ns RDIFF = 54Ω, CL1 = CL2 = 100pF 3
Receiver Input to Output (tPHL) tPHL 20 120 200 ns RDIFF = 54Ω, CL1 = CL2 = 100pF 3
Receiver Skew /tPLH - tPHL/ 5 10 ns CL1 = CL2 = 100pF 3
Receiver Enable to Output Low tZL 50 90 ns CRL = 15pF, S1 closed 3
Receiver Enable to Output High tZH 50 90 ns CRL = 15pF, S2 closed 3
Receiver Disable Time from Low tLZ 40 80 ns CRL = 15pF, S1 closed 3
Receiver Disable Time from High tHZ 40 80 ns CRL = 15pF, S2 closed 3
Maximum Data Rate fMAX 2.5 5 10 Mbps 3
Supply Voltage (test condition) VCC 3.3 V VCC = 3.3V ±0.3V, TA = TMIN to TMAX 2

CAD (KiCad official)

  • Symbol: HT3485EBRZ
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: ht3485ebrz-etched.step / ht3485ebrz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ht3485ebrz.step / ht3485ebrz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HTCSEMI datasheet (8 pp, sha256 2bcf37c89b469cac, retrieved 2026-10-18, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF