Generated by kicad-footprint-generator · KiCad file format 20260206
HT33035ARWZ
HTCSEMI · Motor Driver ICs · SOP-24
HT33035ARWZ from HTCSEMI, in a SOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BT | output | Open-collector top drive output B; sink current max 50 mA and VCE max 40 V. |
| 2 | AT | output | Open-collector top drive output A; sink current max 50 mA and VCE max 40 V. |
| 3 | Fwd/Rev | input | Forward/reverse direction select digital input, limited to Vref with a 3.0 V high threshold and 0.8 V low threshold. |
| 4 | SA | input | Sensor input A to the rotor position decoder, digital input limited to Vref. |
| 5 | SB | input | Sensor input B to the rotor position decoder, digital input limited to Vref. |
| 6 | SC | input | Sensor input C to the rotor position decoder, digital input limited to Vref. |
| 7 | Output Enable | input | Output enable input that enables or disables the drive outputs, with 3.0 V high and 0.8 V low thresholds. |
| 8 | Reference Output | power_out | 6.25 V temperature compensated reference output capable of supplying sensor power, with 40 mA minimum short-circuit current. |
| 9 | Current Sense Noninverting Input | input | Current sense noninverting input with an input voltage range of -0.3 to 5.0 V. |
| 10 | Oscillator | passive | Sawtooth oscillator timing pin for RT/CT, with oscillator input current max 30 mA and a typical frequency of 25 kHz. |
| 11 | Error Amp Noninverting Input | input | Error amplifier noninverting input with an input voltage range of -0.3 V to Vref. |
| 12 | Error Amp Inverting Input | input | Error amplifier inverting input with an input voltage range of -0.3 V to Vref. |
| 13 | Error Amp Out/PWM Input | bidirectional | Error amplifier output and PWM input, with output current (source or sink) max 10 mA. |
| 14 | Fault Output | output | Open-collector active-low fault output with 20 V max and 20 mA max sink current. |
| 15 | Current Sense Inverting Input | input | Current sense inverting input (current sense reference) with an input voltage range of -0.3 to 5.0 V. |
| 16 | Gnd | power_in | Ground reference for the device. |
| 17 | VCC | power_in | Positive power supply for the controller, operating 10 to 30 V with 40 V absolute maximum. |
| 18 | VC | power_in | Bottom drive supply voltage, 30 V maximum. |
| 19 | CB | output | High-current totem pole bottom drive output C, 100 mA max source or sink. |
| 20 | BB | output | High-current totem pole bottom drive output B, 100 mA max source or sink. |
| 21 | AB | output | High-current totem pole bottom drive output A, 100 mA max source or sink. |
| 22 | 60°/120° Select | input | Selects 60°/300° or 120°/240° sensor phasing; digital input limited to Vref. |
| 23 | Brake | input | Brake input for dynamic braking; digital input limited to Vref. |
| 24 | CT | output | Open-collector top drive output C; sink current max 50 mA and VCE max 40 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTCSEMI |
| Package | SOP-24 |
| Category | Power Supply Chip |
| Pins | 24 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply Voltage | Vcc | 40 | V | 2 | |||
| Oscillator Input Current (Source or Sink) | Iosc | 30 | mA | 2 | |||
| Error Amp Input Voltage Range | VIR | -0.3 | V | Pins 11, 12, upper limit Vref | 2 | ||
| Error Amp Output Current | IOut | 10 | mA | Source or Sink | 2 | ||
| Current Sense Input Voltage Range | VSense | -0.3 | 5 | V | Pins 9, 15 | 2 | |
| Fault Output Voltage | VCE(Fault) | 20 | V | 2 | |||
| Fault Output Sink Current | ISink(Fault) | 20 | mA | 2 | |||
| Top Drive Voltage | VCE(top) | 40 | V | Pins 1, 2, 24 | 2 | ||
| Top Drive Sink Current | ISink(top) | 50 | mA | Pins 1, 2, 24 | 2 | ||
| Bottom Drive Supply Voltage | VC | 30 | V | Pin 18 | 2 | ||
| Bottom Drive Output Current | IDRV | 100 | mA | Source or Sink, Pins 19, 20, 21 | 2 | ||
| Power Dissipation, SO package | PD | 650 | mW | TA = 85°C | 2 | ||
| Thermal Resistance, Junction-to-Air, SO package | RθJA | 100 | °C/W | SO Package | 2 | ||
| Operating Junction Temperature | TJ | 150 | °C | 2 | |||
| Reference Output Voltage | Vref | 5.9 | 6.24 | 6.5 | V | Iref = 1.0 mA, TA = 25°C | 2 |
| Reference Output Voltage | Vref | 5.82 | 6.57 | V | Iref = 1.0 mA, TA = -40 to +85°C | 2 | |
| Line Regulation | Regline | 1.5 | 30 | mV | Vcc = 10 to 30 V, Iref = 1.0 mA | 2 | |
| Load Regulation | Regload | 16 | 30 | mV | Iref = 1.0 to 20 mA | 2 | |
| Output Short Circuit Current | ISC | 40 | 75 | mA | Note 3 | 2 | |
| Reference Under Voltage Lockout Threshold | Vth | 4 | 4.5 | 5 | V | 2 | |
| Input Offset Voltage | VIO | 0.4 | 10 | mV | TA = -40 to +85°C | 2 | |
| Input Offset Current | IIO | 8.9 | 500 | nA | TA = -40 to +85°C | 2 | |
| Input Bias Current | IIB | -46 | -1000 | nA | TA = -40 to +85°C | 2 | |
| Open Loop Voltage Gain | AVOL | 70 | 80 | dB | VO = 3.0 V, RL = 15 k | 2 | |
| Input Common Mode Rejection Ratio | CMRR | 55 | 86 | dB | 2 | ||
| Power Supply Rejection Ratio | PSRR | 65 | 105 | dB | Vcc = Vc = 10 to 30 V | 2 | |
| Output Voltage Swing High State | VOH | 4.6 | 5.3 | V | RL = 15k to Gnd | 3 | |
| Output Voltage Swing Low State | VOL | 0.5 | 1 | V | RL = 15k to Vref | 3 | |
| Oscillator Frequency | fosc | 22 | 25 | 28 | kHz | 3 | |
| Frequency Change with Voltage | ∆fosc/∆V | 0.01 | 5 | % | Vcc = 10 to 30 V | 3 | |
| Sawtooth Peak Voltage | VOSC(P) | 4.1 | 4.5 | V | 3 | ||
| Sawtooth Valley Voltage | VOSC(V) | 1.2 | 1.5 | V | 3 | ||
| Input Threshold Voltage High State | VIH | 3 | 2.2 | V | Pins 3, 4, 5, 6, 7, 22, 23 | 3 | |
| Input Threshold Voltage Low State | VIL | 1.7 | 0.8 | V | Pins 3, 4, 5, 6, 7, 22, 23 | 3 | |
| Top Drive Output Sink Saturation | VCE(SAT) | 0.5 | 1.5 | V | ISink = 25 mA | 3 | |
| Top Drive Output Off-State Leakage | IDRV(leak) | 0.06 | 100 | nA | VCE = 30 V | 3 | |
| Fault Output Sink Saturation | VCE(sat) | 225 | 500 | mV | Isink = 16 mA | 3 | |
| Fault Output Off-State Leakage | IFLT(leak) | 1 | 100 | nA | VCE = 20 V | 3 |
CAD (KiCad official)
- Symbol:
HT33035ARWZ - Footprint:
Package_SO:SOP-24_7.5x15.4mm_P1.27mm - 3D model: SOP-24, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 2.65 mm nominal SOIC height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
ht33035arwz-etched.step/ht33035arwz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ht33035arwz.step/ht33035arwz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HTCSEMI datasheet (4 pp, sha256
e8f208d6534f8665, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).