main
History Download
Ray Publish 0.1.0 21fca4d

HT3140ARZ

HTCSEMI · Operational Amplifier · SOP-8

HT3140ARZ from HTCSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OFFSET NULL passive Offset null terminal for input offset voltage nulling, with an adjustment resistor of 4.7 to 18 k (as printed) between terminals 4 and 1 to adjust max VIO.
2 INV. INPUT input Inverting input of the PMOS-input stage, with 1.5 T (typ) input resistance and 10 pA (typ) input current at 15 V.
3 NON-INV. INPUT input Non-inverting input of the PMOS-input stage, which can be swung 0.5 V below the negative supply terminal.
4 V- power_in Negative supply terminal; the device operates from 4 V to 36 V total supply, single or dual.
5 OFFSET NULL passive Second offset null terminal, used with terminal 1 for input offset voltage nulling and as the other end of the 4.7 to 18 k (as printed) adjustment resistor to terminal 4.
6 OUTPUT output Output of the bipolar output stage, protected against indefinite short circuit to either supply rail or ground, with 40 mA (typ) short-circuit source and 18 mA sink current.
7 V+ power_in Positive supply terminal; maximum DC supply voltage between V+ and V- is 36 V.
8 STROBE input Strobe terminal; sink current from terminal 8 to terminal 4 is specified to swing the output low (220 µA as printed).

Key specifications

Parameter Value
Manufacturer HTCSEMI
Package SOP-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage /VIO/ 5 15 mV VSUPPLY = 15V, TA = 25oC 2
Input Offset Current /IIO/ 0.5 30 pA VSUPPLY = 15V, TA = 25oC 2
Input Current II 10 50 pA VSUPPLY = 15V, TA = 25oC 2
Large Signal Voltage Gain AOL 20 100 kV/V Note 3: VO = 26VP-P, +12V, -14V and RL = 2k; VSUPPLY = 15V, TA = 25oC 3
Large Signal Voltage Gain (dB) AOL 86 100 dB Note 3: VO = 26VP-P, +12V, -14V and RL = 2k; VSUPPLY = 15V, TA = 25oC 3
Common Mode Rejection Ratio CMRR 32 320 V/V VSUPPLY = 15V, TA = 25oC 3
Common Mode Rejection Ratio (dB) CMRR 70 90 dB VSUPPLY = 15V, TA = 25oC 3
Common Mode Input Voltage Range VICR -15 11 V VSUPPLY = 15V, TA = 25oC; typical printed as -15.5 to +12.5 3
Power-Supply Rejection Ratio PSRR 100 150 V/V VSUPPLY = 15V, TA = 25oC 3
Power-Supply Rejection Ratio (dB) PSRR 76 80 dB VSUPPLY = 15V, TA = 25oC 3
Max Output Voltage (positive) VOM+ 12 13 V Note 4: RL = 2k; VSUPPLY = 15V, TA = 25oC 3
Max Output Voltage (negative) VOM- -14 -14.4 V Note 4: RL = 2k; VSUPPLY = 15V, TA = 25oC 3
Supply Current I+ 4 6 mA See Figure 32; VSUPPLY = 15V, TA = 25oC 3
Device Dissipation PD 120 180 mW VSUPPLY = 15V, TA = 25oC 3
Supply voltage 4 36 V Single or dual supply (from features/description text) 1
Temperature Range -55 125 oC Operating Conditions 2
DC Supply Voltage (Between V+ and V- Terminals) 36 V Between V+ and V- terminals 2
Differential Mode Input Voltage 8 V 2
Input Terminal Current 1 mA 2
Maximum Junction Temperature (Plastic Package) 150 oC Plastic package 2
Maximum Storage Temperature Range -65 150 oC 2
Maximum Lead Temperature (Soldering 10s) 300 oC Soldering 10s; SOIC - lead tips only 2
Thermal Resistance Junction-to-Ambient (SOIC) JA 165 oC/W Typical, Note 1: measured on low effective thermal conductivity test board in free air; SOIC package 2

CAD (KiCad official)

  • Symbol: HT3140ARZ
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: ht3140arz-etched.step / ht3140arz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ht3140arz.step / ht3140arz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HTCSEMI datasheet (20 pp, sha256 75177fe805109bc0, retrieved 2026-11-05, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF