Generated by kicad-footprint-generator · KiCad file format 20260206
HT3140ARZ
HTCSEMI · Operational Amplifier · SOP-8
HT3140ARZ from HTCSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OFFSET NULL | passive | Offset null terminal for input offset voltage nulling, with an adjustment resistor of 4.7 to 18 k (as printed) between terminals 4 and 1 to adjust max VIO. |
| 2 | INV. INPUT | input | Inverting input of the PMOS-input stage, with 1.5 T (typ) input resistance and 10 pA (typ) input current at 15 V. |
| 3 | NON-INV. INPUT | input | Non-inverting input of the PMOS-input stage, which can be swung 0.5 V below the negative supply terminal. |
| 4 | V- | power_in | Negative supply terminal; the device operates from 4 V to 36 V total supply, single or dual. |
| 5 | OFFSET NULL | passive | Second offset null terminal, used with terminal 1 for input offset voltage nulling and as the other end of the 4.7 to 18 k (as printed) adjustment resistor to terminal 4. |
| 6 | OUTPUT | output | Output of the bipolar output stage, protected against indefinite short circuit to either supply rail or ground, with 40 mA (typ) short-circuit source and 18 mA sink current. |
| 7 | V+ | power_in | Positive supply terminal; maximum DC supply voltage between V+ and V- is 36 V. |
| 8 | STROBE | input | Strobe terminal; sink current from terminal 8 to terminal 4 is specified to swing the output low (220 µA as printed). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTCSEMI |
| Package | SOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | /VIO/ | 5 | 15 | mV | VSUPPLY = 15V, TA = 25oC | 2 | |
| Input Offset Current | /IIO/ | 0.5 | 30 | pA | VSUPPLY = 15V, TA = 25oC | 2 | |
| Input Current | II | 10 | 50 | pA | VSUPPLY = 15V, TA = 25oC | 2 | |
| Large Signal Voltage Gain | AOL | 20 | 100 | kV/V | Note 3: VO = 26VP-P, +12V, -14V and RL = 2k; VSUPPLY = 15V, TA = 25oC | 3 | |
| Large Signal Voltage Gain (dB) | AOL | 86 | 100 | dB | Note 3: VO = 26VP-P, +12V, -14V and RL = 2k; VSUPPLY = 15V, TA = 25oC | 3 | |
| Common Mode Rejection Ratio | CMRR | 32 | 320 | V/V | VSUPPLY = 15V, TA = 25oC | 3 | |
| Common Mode Rejection Ratio (dB) | CMRR | 70 | 90 | dB | VSUPPLY = 15V, TA = 25oC | 3 | |
| Common Mode Input Voltage Range | VICR | -15 | 11 | V | VSUPPLY = 15V, TA = 25oC; typical printed as -15.5 to +12.5 | 3 | |
| Power-Supply Rejection Ratio | PSRR | 100 | 150 | V/V | VSUPPLY = 15V, TA = 25oC | 3 | |
| Power-Supply Rejection Ratio (dB) | PSRR | 76 | 80 | dB | VSUPPLY = 15V, TA = 25oC | 3 | |
| Max Output Voltage (positive) | VOM+ | 12 | 13 | V | Note 4: RL = 2k; VSUPPLY = 15V, TA = 25oC | 3 | |
| Max Output Voltage (negative) | VOM- | -14 | -14.4 | V | Note 4: RL = 2k; VSUPPLY = 15V, TA = 25oC | 3 | |
| Supply Current | I+ | 4 | 6 | mA | See Figure 32; VSUPPLY = 15V, TA = 25oC | 3 | |
| Device Dissipation | PD | 120 | 180 | mW | VSUPPLY = 15V, TA = 25oC | 3 | |
| Supply voltage | 4 | 36 | V | Single or dual supply (from features/description text) | 1 | ||
| Temperature Range | -55 | 125 | oC | Operating Conditions | 2 | ||
| DC Supply Voltage (Between V+ and V- Terminals) | 36 | V | Between V+ and V- terminals | 2 | |||
| Differential Mode Input Voltage | 8 | V | 2 | ||||
| Input Terminal Current | 1 | mA | 2 | ||||
| Maximum Junction Temperature (Plastic Package) | 150 | oC | Plastic package | 2 | |||
| Maximum Storage Temperature Range | -65 | 150 | oC | 2 | |||
| Maximum Lead Temperature (Soldering 10s) | 300 | oC | Soldering 10s; SOIC - lead tips only | 2 | |||
| Thermal Resistance Junction-to-Ambient (SOIC) | JA | 165 | oC/W | Typical, Note 1: measured on low effective thermal conductivity test board in free air; SOIC package | 2 |
CAD (KiCad official)
- Symbol:
HT3140ARZ - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
ht3140arz-etched.step/ht3140arz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ht3140arz.step/ht3140arz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HTCSEMI datasheet (20 pp, sha256
75177fe805109bc0, retrieved 2026-11-05, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).