main
History Download
Ray Publish 0.1.0 f29dd88

HT3140ANZ

HTCSEMI · Operational Amplifier · PDIP-8

HT3140ANZ from HTCSEMI, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OFFSET NULL passive Input offset voltage null terminal, where a resistor (typically 4.7k for HT3140A) between terminals 4 and 1 adjusts the offset.
2 INV. INPUT input Inverting input of the PMOS-input stage, with the common-mode range extending to 0.5V below the negative supply.
3 NON-INV. INPUT input Non-inverting input of the PMOS-input stage, with the common-mode range extending to 0.5V below the negative supply.
4 V- power_in Negative supply terminal (or ground in single-supply use), with a total supply of 4V to 36V between V+ and V-.
5 OFFSET NULL passive Input offset voltage null terminal, where a resistor (typically 4.7k for HT3140A) between terminals 4 and 5 adjusts the offset.
6 OUTPUT output Bipolar output stage protected against short circuit to either supply or ground, with 40mA source and 18mA sink short-circuit current typical.
7 V+ power_in Positive supply terminal, with a total supply of 4V to 36V between V+ and V-.
8 STROBE input Strobe/frequency compensation access terminal, where sinking current (220 µA typical) to terminal 4 swings the output low.

Key specifications

Parameter Value
Manufacturer HTCSEMI
Package PDIP-8
Category Amplifiers
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage /VIO/ 5 15 mV VSUPPLY = 15V, TA = 25oC 2
Input Offset Current /IIO/ 0.5 30 pA VSUPPLY = 15V, TA = 25oC 2
Input Current II 10 50 pA VSUPPLY = 15V, TA = 25oC 2
Large Signal Voltage Gain AOL 20 100 kV/V VSUPPLY = 15V, TA = 25oC 3
Large Signal Voltage Gain AOL 86 100 dB VSUPPLY = 15V, TA = 25oC 3
Common Mode Rejection Ratio CMRR 32 320 V/V VSUPPLY = 15V, TA = 25oC 3
Common Mode Rejection Ratio CMRR 70 90 dB VSUPPLY = 15V, TA = 25oC 3
Common Mode Input Voltage Range VICR -15 11 V VSUPPLY = 15V, TA = 25oC 3
Power-Supply Rejection Ratio VIO/VS 100 150 V/V VSUPPLY = 15V, TA = 25oC 3
Power-Supply Rejection Ratio VIO/VS 76 80 dB VSUPPLY = 15V, TA = 25oC 3
Max Output Voltage High VOM+ 12 13 V VSUPPLY = 15V, TA = 25oC; RL = 2k 3
Max Output Voltage Low VOM- -14 -14.4 V VSUPPLY = 15V, TA = 25oC; RL = 2k 3
Supply Current I+ 4 6 mA VSUPPLY = 15V, TA = 25oC 3
Device Dissipation PD 120 180 mW VSUPPLY = 15V, TA = 25oC 3
Input Offset Voltage Temperature Drift VIO/T 8 V/oC VSUPPLY = 15V, TA = 25oC 3
Absolute Maximum DC Supply Voltage (V+ to V-) 36 V 2
Absolute Maximum Differential Mode Input Voltage 8 V 2
Absolute Maximum Input Terminal Current 1 mA 2
Operating Temperature Range -55 125 oC 2
Supply Voltage Operating Range 4 36 V Single or dual supply 1
Maximum Junction Temperature 150 oC Plastic package 2
Maximum Storage Temperature Range -65 150 oC 2
Maximum Lead Temperature (Soldering) 300 oC Soldering 10s 2
Thermal Resistance Junction to Ambient (PDIP) JA 115 oC/W Typical, Note 1; PDIP package, free air 2
Input Resistance RI 1.5 T VSUPPLY = 15V, TA = 25oC 2
Input Capacitance CI 4 pF VSUPPLY = 15V, TA = 25oC 2
Gain-Bandwidth Product fT 4.5 MHz VSUPPLY = 15V, TA = 25oC 2

CAD (KiCad official)

  • Symbol: HT3140ANZ
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: PDIP-8 (KiCad packages3D, STEP)
  • 3D model files: ht3140anz-etched.step / ht3140anz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ht3140anz.step / ht3140anz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HTCSEMI datasheet (20 pp, sha256 894d205cd7711238, retrieved 2026-11-09, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF