Generated by kicad-footprint-generator · KiCad file format 20260206
HT3140ANZ
HTCSEMI · Operational Amplifier · PDIP-8
HT3140ANZ from HTCSEMI, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OFFSET NULL | passive | Input offset voltage null terminal, where a resistor (typically 4.7k for HT3140A) between terminals 4 and 1 adjusts the offset. |
| 2 | INV. INPUT | input | Inverting input of the PMOS-input stage, with the common-mode range extending to 0.5V below the negative supply. |
| 3 | NON-INV. INPUT | input | Non-inverting input of the PMOS-input stage, with the common-mode range extending to 0.5V below the negative supply. |
| 4 | V- | power_in | Negative supply terminal (or ground in single-supply use), with a total supply of 4V to 36V between V+ and V-. |
| 5 | OFFSET NULL | passive | Input offset voltage null terminal, where a resistor (typically 4.7k for HT3140A) between terminals 4 and 5 adjusts the offset. |
| 6 | OUTPUT | output | Bipolar output stage protected against short circuit to either supply or ground, with 40mA source and 18mA sink short-circuit current typical. |
| 7 | V+ | power_in | Positive supply terminal, with a total supply of 4V to 36V between V+ and V-. |
| 8 | STROBE | input | Strobe/frequency compensation access terminal, where sinking current (220 µA typical) to terminal 4 swings the output low. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTCSEMI |
| Package | PDIP-8 |
| Category | Amplifiers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | /VIO/ | 5 | 15 | mV | VSUPPLY = 15V, TA = 25oC | 2 | |
| Input Offset Current | /IIO/ | 0.5 | 30 | pA | VSUPPLY = 15V, TA = 25oC | 2 | |
| Input Current | II | 10 | 50 | pA | VSUPPLY = 15V, TA = 25oC | 2 | |
| Large Signal Voltage Gain | AOL | 20 | 100 | kV/V | VSUPPLY = 15V, TA = 25oC | 3 | |
| Large Signal Voltage Gain | AOL | 86 | 100 | dB | VSUPPLY = 15V, TA = 25oC | 3 | |
| Common Mode Rejection Ratio | CMRR | 32 | 320 | V/V | VSUPPLY = 15V, TA = 25oC | 3 | |
| Common Mode Rejection Ratio | CMRR | 70 | 90 | dB | VSUPPLY = 15V, TA = 25oC | 3 | |
| Common Mode Input Voltage Range | VICR | -15 | 11 | V | VSUPPLY = 15V, TA = 25oC | 3 | |
| Power-Supply Rejection Ratio | VIO/VS | 100 | 150 | V/V | VSUPPLY = 15V, TA = 25oC | 3 | |
| Power-Supply Rejection Ratio | VIO/VS | 76 | 80 | dB | VSUPPLY = 15V, TA = 25oC | 3 | |
| Max Output Voltage High | VOM+ | 12 | 13 | V | VSUPPLY = 15V, TA = 25oC; RL = 2k | 3 | |
| Max Output Voltage Low | VOM- | -14 | -14.4 | V | VSUPPLY = 15V, TA = 25oC; RL = 2k | 3 | |
| Supply Current | I+ | 4 | 6 | mA | VSUPPLY = 15V, TA = 25oC | 3 | |
| Device Dissipation | PD | 120 | 180 | mW | VSUPPLY = 15V, TA = 25oC | 3 | |
| Input Offset Voltage Temperature Drift | VIO/T | 8 | V/oC | VSUPPLY = 15V, TA = 25oC | 3 | ||
| Absolute Maximum DC Supply Voltage (V+ to V-) | 36 | V | 2 | ||||
| Absolute Maximum Differential Mode Input Voltage | 8 | V | 2 | ||||
| Absolute Maximum Input Terminal Current | 1 | mA | 2 | ||||
| Operating Temperature Range | -55 | 125 | oC | 2 | |||
| Supply Voltage Operating Range | 4 | 36 | V | Single or dual supply | 1 | ||
| Maximum Junction Temperature | 150 | oC | Plastic package | 2 | |||
| Maximum Storage Temperature Range | -65 | 150 | oC | 2 | |||
| Maximum Lead Temperature (Soldering) | 300 | oC | Soldering 10s | 2 | |||
| Thermal Resistance Junction to Ambient (PDIP) | JA | 115 | oC/W | Typical, Note 1; PDIP package, free air | 2 | ||
| Input Resistance | RI | 1.5 | T | VSUPPLY = 15V, TA = 25oC | 2 | ||
| Input Capacitance | CI | 4 | pF | VSUPPLY = 15V, TA = 25oC | 2 | ||
| Gain-Bandwidth Product | fT | 4.5 | MHz | VSUPPLY = 15V, TA = 25oC | 2 |
CAD (KiCad official)
- Symbol:
HT3140ANZ - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: PDIP-8 (KiCad packages3D, STEP)
- 3D model files:
ht3140anz-etched.step/ht3140anz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ht3140anz.step/ht3140anz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HTCSEMI datasheet (20 pp, sha256
894d205cd7711238, retrieved 2026-11-09, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).