component
HP3600-AB001-SP16R
Public Made by Adomby adom
Hynetek Gate Drivers, SOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 8d ago |
| viewers | 8d ago |
| hp3600-ab001-sp16r-etched.glb | 8d ago |
| hp3600-ab001-sp16r-etched.step | 8d ago |
| hp3600-ab001-sp16r-hero.glb | 8d ago |
| hp3600-ab001-sp16r-hero.overlay.json | 8d ago |
| hp3600-ab001-sp16r.glb | 8d ago |
| hp3600-ab001-sp16r.kicad_mod | 8d ago |
| hp3600-ab001-sp16r.kicad_sym | 8d ago |
| hp3600-ab001-sp16r.lbr | 8d ago |
| hp3600-ab001-sp16r.step | 8d ago |
| package.json | 8d ago |
| page.json | 8d ago |
| README.md | 8d ago |
HP3600-AB001-SP16R
Hynetek · Gate Drivers · SOP-16
HP3600-AB001-SP16R from Hynetek, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | INA | input | Input signal for the A channel with a TTL/CMOS-compatible threshold; the pin is pulled low internally if left open, and tying it to ground when unused is recommended for noise immunity. |
| 2 | INB | input | Input signal for the B channel with a TTL/CMOS-compatible threshold; the pin is pulled low internally if left open, and tying it to ground when unused is recommended for noise immunity. |
| 3 | VDDI | power_in | Primary-side supply voltage, specified from 3 V to 18 V, to be decoupled to GNDI with a low ESR/ESL capacitor placed as close to the device as possible. |
| 4 | GNDI | power_in | Primary-side ground reference to which all primary-side signals are referenced. |
| 5 | DIS | input | Disables both driver outputs when asserted high and enables them when set low or left open; the pin is pulled low internally, and a 1 nF low ESR/ESL capacitor close to the pin is recommended when driven from a distant microcontroller. |
| 6 | DTC | input | Dead-time programming input where a resistor between DTC and GNDI sets the dead time (200 ns typical at RDTC = 20 kΩ), with a bypass capacitor of 2.2 nF or greater recommended between DTC and GNDI. |
| 7 | NC | unconnected | No internal connection. |
| 8 | VDDI | power_in | Primary-side supply voltage that is internally shorted to pin 3. |
| 9 | GNDB | power_in | Ground reference for the secondary-side B channel driver. |
| 10 | OUTB | output | Output of driver B, connected to the gate of the B-channel FET. |
| 11 | VDDB | power_in | Secondary-side supply for driver B, specified from 3.5 V to 30 V for the output supply, to be decoupled to GNDB with a low ESR/ESL capacitor placed close to the device. |
| 12 | NC | unconnected | No internal connection. |
| 13 | NC | unconnected | No internal connection. |
| 14 | GNDA | power_in | Ground reference for the secondary-side A channel driver. |
| 15 | OUTA | output | Output of driver A, connected to the gate of the A-channel FET. |
| 16 | VDDA | power_in | Secondary-side supply for driver A, specified from 3.5 V to 30 V for the output supply, to be decoupled to GNDA with a low ESR/ESL capacitor placed close to the device. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Hynetek |
| Package | SOP-16 |
| Category | Motor Driver ICs |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input supply voltage | VDDI | 3 | 18 | V | 6 | ||
| Input supply quiescent current | IDDI | 1.5 | 2 | 2.5 | mA | VINA = 0 V, VINB = 0 V | 6 |
| Input supply operating current | IDDI | 1.9 | 2 | 3.1 | mA | Fsw = 50 kHz, current per channel, COUT = 100 pF | 6 |
| Output supply voltage | VDDA/VDDB | 3.5 | 30 | V | 6 | ||
| Output supply quiescent current | IVDDA/IVVDB | 0.8 | 1.3 | 2 | mA | VINA = 0 V, VINB = 0 V | 6 |
| Output supply operating current | IVDDA/IVVDB | 1.2 | 1.7 | 2.3 | mA | Fsw = 50 kHz, current per channel, COUT = 100 pF | 6 |
| UVLO turn-on threshold (VDDA/VDDB) | VUVLO_ON | 3.2 | 3.5 | 3.8 | V | 6 | |
| UVLO turn-off threshold (VDDA/VDDB) | VUVLO_OFF | 2.7 | 3 | 3.3 | V | 6 | |
| UVLO turn-on threshold (VDDI) | VDDI_ON | 2.5 | 2.7 | 2.9 | V | 6 | |
| UVLO turn-off threshold (VDDI) | VDDI_OFF | 2.3 | 2.5 | 2.7 | V | 6 | |
| Input voltage threshold for transition Low to High | VINH | 1.7 | 2.1 | V | 6 | ||
| Input voltage threshold for transition High to Low | VINL | 0.8 | 1.1 | V | 6 | ||
| Input voltage threshold hysteresis | VIN_HYST | 0.4 | 0.8 | 1.2 | V | 6 | |
| Pull down resistance on VIA, VIB, DIS and PWM | RPD | 100 | 170 | 280 | kΩ | 6 | |
| Dead time | tDT | 160 | 200 | 240 | ns | RDTC = 20 kΩ | 6 |
| Output supply voltage, VDDA, VDDB, continuous | VDDA, VDDB | -0.3 | 35 | V | continuous | 8 | |
| Output voltage OUTA to GNDA, OUTB to GNDB, continuous (max VDDx + 0.3 V) | -0.3 | V | continuous | 8 | |||
| Output voltage OUTA, OUTB, transient (max VDDx + 1.5 V) | -3 | V | transient for 200 ns | 8 | |||
| Input supply voltage VDDI to GND | VDDI | -0.3 | 20 | V | 8 | ||
| Input voltage INA, INB, DIS, DTC (max VDDI + 0.3 V) | -7 | V | 8 | ||||
| Output channel to channel internal isolation | 1500 | V | 8 | ||||
| Junction temperature range | -40 | 150 | °C | 8 | |||
| Storage temperature | -65 | 150 | °C | 8 | |||
| Electrostatic discharge, human body model | 3000 | V | Human body model | 8 | |||
| Electrostatic discharge, charged device model | 2000 | V | Changed device model (as printed) | 8 | |||
| Thermal resistance, junction to ambient (SOP-16) | θJA | 150 | °C/W | Natural convection, one cubic foot sealed enclosure | 8 | ||
| Thermal resistance, junction to case (SOP-16) | θJC | 38 | °C/W | 8 |
CAD (KiCad official)
- Symbol:
HP3600-AB001-SP16R - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files:
hp3600-ab001-sp16r-etched.step/hp3600-ab001-sp16r-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hp3600-ab001-sp16r.step/hp3600-ab001-sp16r.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Hynetek datasheet (11 pp, sha256
4f58e81aef54c0b0, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).