main
Ray
Publish 0.1.0
d7a3427
HLM358N
HXY MOSFET · Operational Amplifier · DIP-8
HLM358N from HXY MOSFET, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Output of op-amp 1; the datasheet rates its output short-circuit-to-ground current at 40 to 60 mA with V+ = 15 V and Ta = 25 ℃. |
| 2 | 1IN− | input | Inverting input of op-amp 1; input voltage is rated from -0.3 V to 24 V, and the input current is limited to 50 mA when VIN is below -0.3 V. |
| 3 | 1IN+ | input | Non-inverting input of op-amp 1; input voltage is rated from -0.3 V to 24 V, with a common-mode input range of 0 to V+ −1.5 V at V+ = 24 V and Ta = 25 ℃. |
| 4 | GND | power_in | Ground pin of the device, the reference for the supply and the inputs. |
| 5 | 2IN+ | input | Non-inverting input of op-amp 2; input voltage is rated from -0.3 V to 24 V, with a common-mode input range of 0 to V+ −1.5 V at V+ = 24 V and Ta = 25 ℃. |
| 6 | 2IN− | input | Inverting input of op-amp 2; input voltage is rated from -0.3 V to 24 V, and the input current is limited to 50 mA when VIN is below -0.3 V. |
| 7 | 2OUT | output | Output of op-amp 2; the datasheet rates its output short-circuit-to-ground current at 40 to 60 mA with V+ = 15 V and Ta = 25 ℃. |
| 8 | VCC | power_in | Positive supply pin; the device runs from a single supply or dual supplies, with supply voltage rated at 24 V or ±12 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | DIP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | 2 | 7 | mV | Ta=25℃ | 2 | ||
| Input bias current | IIN(+) / IIN(-) | 45 | 150 | nA | Ta=25℃, VCM=0V | 2 | |
| Input offset current | IIN(+) - IIN(-) | 3 | 30 | nA | Ta=25℃, VCM=0V | 2 | |
| Input common-mode voltage range | 0 | V | Ta=25℃, V+=24V; upper limit printed as V+-1.5 | 2 | |||
| Supply current | 1 | 2 | mA | Full temperature range, RL=∞, all op amps, V+=24V | 2 | ||
| Supply current | 0.5 | 1.2 | mA | Full temperature range, RL=∞, all op amps, V+=5V | 2 | ||
| Large signal voltage gain | 50 | 100 | V/mV | V+=15V, Ta=25℃, RL≥2kΩ, Vo=1~11V | 2 | ||
| Common-mode rejection ratio | 65 | 90 | dB | DC, Ta=25℃, VCM=0~V+-1.5V | 2 | ||
| Power supply rejection ratio | 65 | 100 | dB | DC, Ta=25℃, V+=5~24V | 2 | ||
| Amplifier-to-amplifier coupling | -120 | dB | Ta=25℃, f=1~20kHz, all inputs | 2 | |||
| Output source current | 20 | 40 | mA | VIN(+)=1V, VIN(-)=0V, V+=15V, Vo=2V, Ta=25℃ | 2 | ||
| Output source current | 10 | 20 | mA | VIN(-)=1V, VIN(+)=0V, V+=15V, Vo=2V, Ta=25℃ | 2 | ||
| Output sink current | 12 | 50 | µA | VIN(-)=1V, VIN(+)=0V, V+=15V, Vo=200mV, Ta=25℃ | 2 | ||
| Short-circuit current to ground | 40 | 60 | mA | V+=15V, Ta=25℃ | 2 | ||
| Input offset voltage | 7 | mV | 2 | ||||
| Input offset voltage drift | 7 | µV/℃ | Rs=0Ω | 2 | |||
| Input offset current | IIN(+) - IIN(-) | 100 | nA | 2 | |||
| Input offset current drift | 10 | pA/℃ | Rs=0Ω | 2 | |||
| Input bias current | IIN(+) / IIN(-) | 40 | 300 | nA | 2 | ||
| Large signal voltage gain | 25 | V/mV | V+=15V, Vo=1~11V, RL≥2kΩ | 2 | |||
| Output voltage swing | 20 | V | RL=2kΩ | 2 | |||
| High-level output voltage | VOH | 21 | 22 | V | V+=24V, RL=10kΩ | 2 | |
| Low-level output voltage | VOL | 5 | 20 | mV | V+=5V, RL=10kΩ | 2 | |
| Output current (source) | 10 | 20 | mA | VIN(+)=1V, VIN(-)=0V, V+=15V, Vo=2V | 2 | ||
| Output current (sink) | 5 | 8 | mA | VIN(-)=1V, VIN(+)=0V, V+=15V, Vo=2V | 2 | ||
| Supply voltage | 24 | V | Single supply 24 V or dual supply ±12 V as printed | 1 | |||
| Differential input voltage | 24 | V | 1 | ||||
| Input voltage | -0.3 | 24 | V | 1 | |||
| Input current | VIN | 50 | mA | VIN<-0.3V | 1 | ||
| Operating ambient temperature | 0 | 70 | ℃ | 1 | |||
| Storage temperature | -65 | 150 | ℃ | 1 |
CAD (KiCad official)
- Symbol:
HLM358N - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files:
hlm358n-etched.step/hlm358n-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hlm358n.step/hlm358n.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HXY MOSFET datasheet (7 pp, sha256
18381f256696f147, retrieved 2026-10-29, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HLM358N
**HXY MOSFET** · Operational Amplifier · DIP-8
HLM358N from HXY MOSFET, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Output of op-amp 1; the datasheet rates its output short-circuit-to-ground current at 40 to 60 mA with V+ = 15 V and Ta = 25 ℃. |
| 2 | 1IN− | input | Inverting input of op-amp 1; input voltage is rated from -0.3 V to 24 V, and the input current is limited to 50 mA when VIN is below -0.3 V. |
| 3 | 1IN+ | input | Non-inverting input of op-amp 1; input voltage is rated from -0.3 V to 24 V, with a common-mode input range of 0 to V+ −1.5 V at V+ = 24 V and Ta = 25 ℃. |
| 4 | GND | power_in | Ground pin of the device, the reference for the supply and the inputs. |
| 5 | 2IN+ | input | Non-inverting input of op-amp 2; input voltage is rated from -0.3 V to 24 V, with a common-mode input range of 0 to V+ −1.5 V at V+ = 24 V and Ta = 25 ℃. |
| 6 | 2IN− | input | Inverting input of op-amp 2; input voltage is rated from -0.3 V to 24 V, and the input current is limited to 50 mA when VIN is below -0.3 V. |
| 7 | 2OUT | output | Output of op-amp 2; the datasheet rates its output short-circuit-to-ground current at 40 to 60 mA with V+ = 15 V and Ta = 25 ℃. |
| 8 | VCC | power_in | Positive supply pin; the device runs from a single supply or dual supplies, with supply voltage rated at 24 V or ±12 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | DIP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | | | 2 | 7 | mV | Ta=25℃ | 2 |
| Input bias current | IIN(+) / IIN(-) | | 45 | 150 | nA | Ta=25℃, VCM=0V | 2 |
| Input offset current | IIN(+) - IIN(-) | | 3 | 30 | nA | Ta=25℃, VCM=0V | 2 |
| Input common-mode voltage range | | 0 | | | V | Ta=25℃, V+=24V; upper limit printed as V+-1.5 | 2 |
| Supply current | | | 1 | 2 | mA | Full temperature range, RL=∞, all op amps, V+=24V | 2 |
| Supply current | | | 0.5 | 1.2 | mA | Full temperature range, RL=∞, all op amps, V+=5V | 2 |
| Large signal voltage gain | | | 50 | 100 | V/mV | V+=15V, Ta=25℃, RL≥2kΩ, Vo=1~11V | 2 |
| Common-mode rejection ratio | | | 65 | 90 | dB | DC, Ta=25℃, VCM=0~V+-1.5V | 2 |
| Power supply rejection ratio | | | 65 | 100 | dB | DC, Ta=25℃, V+=5~24V | 2 |
| Amplifier-to-amplifier coupling | | | -120 | | dB | Ta=25℃, f=1~20kHz, all inputs | 2 |
| Output source current | | | 20 | 40 | mA | VIN(+)=1V, VIN(-)=0V, V+=15V, Vo=2V, Ta=25℃ | 2 |
| Output source current | | | 10 | 20 | mA | VIN(-)=1V, VIN(+)=0V, V+=15V, Vo=2V, Ta=25℃ | 2 |
| Output sink current | | | 12 | 50 | µA | VIN(-)=1V, VIN(+)=0V, V+=15V, Vo=200mV, Ta=25℃ | 2 |
| Short-circuit current to ground | | | 40 | 60 | mA | V+=15V, Ta=25℃ | 2 |
| Input offset voltage | | | | 7 | mV | | 2 |
| Input offset voltage drift | | | 7 | | µV/℃ | Rs=0Ω | 2 |
| Input offset current | IIN(+) - IIN(-) | | | 100 | nA | | 2 |
| Input offset current drift | | | 10 | | pA/℃ | Rs=0Ω | 2 |
| Input bias current | IIN(+) / IIN(-) | | 40 | 300 | nA | | 2 |
| Large signal voltage gain | | 25 | | | V/mV | V+=15V, Vo=1~11V, RL≥2kΩ | 2 |
| Output voltage swing | | 20 | | | V | RL=2kΩ | 2 |
| High-level output voltage | VOH | | 21 | 22 | V | V+=24V, RL=10kΩ | 2 |
| Low-level output voltage | VOL | | 5 | 20 | mV | V+=5V, RL=10kΩ | 2 |
| Output current (source) | | | 10 | 20 | mA | VIN(+)=1V, VIN(-)=0V, V+=15V, Vo=2V | 2 |
| Output current (sink) | | | 5 | 8 | mA | VIN(-)=1V, VIN(+)=0V, V+=15V, Vo=2V | 2 |
| Supply voltage | | | | 24 | V | Single supply 24 V or dual supply ±12 V as printed | 1 |
| Differential input voltage | | | | 24 | V | | 1 |
| Input voltage | | -0.3 | | 24 | V | | 1 |
| Input current | VIN | | | 50 | mA | VIN<-0.3V | 1 |
| Operating ambient temperature | | 0 | | 70 | ℃ | | 1 |
| Storage temperature | | -65 | | 150 | ℃ | | 1 |
## CAD (KiCad official)
- Symbol: `HLM358N`
- Footprint: `Package_DIP:DIP-8_W7.62mm`
- 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files: `hlm358n-etched.step` / `hlm358n-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hlm358n.step` / `hlm358n.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HXY MOSFET datasheet](docs/hlm358n-datasheet.pdf) (7 pp, sha256 `18381f256696f147`, retrieved 2026-10-29, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hlm358n-datasheet.pdf)