Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

HLM358N

HXY MOSFET · Operational Amplifier · DIP-8

HLM358N from HXY MOSFET, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1OUT output Output of op-amp 1; the datasheet rates its output short-circuit-to-ground current at 40 to 60 mA with V+ = 15 V and Ta = 25 ℃.
2 1IN− input Inverting input of op-amp 1; input voltage is rated from -0.3 V to 24 V, and the input current is limited to 50 mA when VIN is below -0.3 V.
3 1IN+ input Non-inverting input of op-amp 1; input voltage is rated from -0.3 V to 24 V, with a common-mode input range of 0 to V+ −1.5 V at V+ = 24 V and Ta = 25 ℃.
4 GND power_in Ground pin of the device, the reference for the supply and the inputs.
5 2IN+ input Non-inverting input of op-amp 2; input voltage is rated from -0.3 V to 24 V, with a common-mode input range of 0 to V+ −1.5 V at V+ = 24 V and Ta = 25 ℃.
6 2IN− input Inverting input of op-amp 2; input voltage is rated from -0.3 V to 24 V, and the input current is limited to 50 mA when VIN is below -0.3 V.
7 2OUT output Output of op-amp 2; the datasheet rates its output short-circuit-to-ground current at 40 to 60 mA with V+ = 15 V and Ta = 25 ℃.
8 VCC power_in Positive supply pin; the device runs from a single supply or dual supplies, with supply voltage rated at 24 V or ±12 V.

Key specifications

Parameter Value
Manufacturer HXY MOSFET
Package DIP-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage 2 7 mV Ta=25℃ 2
Input bias current IIN(+) / IIN(-) 45 150 nA Ta=25℃, VCM=0V 2
Input offset current IIN(+) - IIN(-) 3 30 nA Ta=25℃, VCM=0V 2
Input common-mode voltage range 0 V Ta=25℃, V+=24V; upper limit printed as V+-1.5 2
Supply current 1 2 mA Full temperature range, RL=∞, all op amps, V+=24V 2
Supply current 0.5 1.2 mA Full temperature range, RL=∞, all op amps, V+=5V 2
Large signal voltage gain 50 100 V/mV V+=15V, Ta=25℃, RL≥2kΩ, Vo=1~11V 2
Common-mode rejection ratio 65 90 dB DC, Ta=25℃, VCM=0~V+-1.5V 2
Power supply rejection ratio 65 100 dB DC, Ta=25℃, V+=5~24V 2
Amplifier-to-amplifier coupling -120 dB Ta=25℃, f=1~20kHz, all inputs 2
Output source current 20 40 mA VIN(+)=1V, VIN(-)=0V, V+=15V, Vo=2V, Ta=25℃ 2
Output source current 10 20 mA VIN(-)=1V, VIN(+)=0V, V+=15V, Vo=2V, Ta=25℃ 2
Output sink current 12 50 µA VIN(-)=1V, VIN(+)=0V, V+=15V, Vo=200mV, Ta=25℃ 2
Short-circuit current to ground 40 60 mA V+=15V, Ta=25℃ 2
Input offset voltage 7 mV 2
Input offset voltage drift 7 µV/℃ Rs=0Ω 2
Input offset current IIN(+) - IIN(-) 100 nA 2
Input offset current drift 10 pA/℃ Rs=0Ω 2
Input bias current IIN(+) / IIN(-) 40 300 nA 2
Large signal voltage gain 25 V/mV V+=15V, Vo=1~11V, RL≥2kΩ 2
Output voltage swing 20 V RL=2kΩ 2
High-level output voltage VOH 21 22 V V+=24V, RL=10kΩ 2
Low-level output voltage VOL 5 20 mV V+=5V, RL=10kΩ 2
Output current (source) 10 20 mA VIN(+)=1V, VIN(-)=0V, V+=15V, Vo=2V 2
Output current (sink) 5 8 mA VIN(-)=1V, VIN(+)=0V, V+=15V, Vo=2V 2
Supply voltage 24 V Single supply 24 V or dual supply ±12 V as printed 1
Differential input voltage 24 V 1
Input voltage -0.3 24 V 1
Input current VIN 50 mA VIN<-0.3V 1
Operating ambient temperature 0 70 ℃ 1
Storage temperature -65 150 ℃ 1

CAD (KiCad official)

  • Symbol: HLM358N
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: DIP-8 (KiCad packages3D, STEP)
  • 3D model files: hlm358n-etched.step / hlm358n-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hlm358n.step / hlm358n.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HXY MOSFET datasheet (7 pp, sha256 18381f256696f147, retrieved 2026-10-29, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF