main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers hk32f103c8t6-evb: viewers rendered from the public page · Ray
hk32f103c8t6-evb-etched.glb hk32f103c8t6-evb: factory component page (tier=lcsc) · Ray
hk32f103c8t6-evb-etched.step hk32f103c8t6-evb: factory component page (tier=lcsc) · Ray
hk32f103c8t6-evb-hero.glb hk32f103c8t6-evb: hero GLB from the etched model (keeps the MPN mark) · Ray
hk32f103c8t6-evb-hero.overlay.json hk32f103c8t6-evb: hero GLB from the etched model (keeps the MPN mark) · Ray
hk32f103c8t6-evb.glb Publish 0.1.0 · Ray
hk32f103c8t6-evb.kicad_mod Publish 0.1.0 · Ray
hk32f103c8t6-evb.kicad_sym Publish 0.1.0 · Ray
hk32f103c8t6-evb.lbr Publish 0.1.0 · Ray
hk32f103c8t6-evb.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 48 pins · Ray

HK32F103C8T6 EVB

HK · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-48(7x7)

HK32F103C8T6 EVB from HK, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VBAT power_in Backup supply (1.8-3.6 V) that powers the RTC, external 32.768 kHz oscillator and backup registers when VDD is off.
2 PC13-TAMPER-RTC bidirectional GPIO PC13 (no Schmitt function) with alternate functions TAMPERIN/WKUP1/RTCO.
3 PC14-OSC32_IN bidirectional GPIO PC14 (no Schmitt function) with alternate function OSC32_IN/LSE_CKI for the 32.768 kHz crystal or external clock input.
4 PC15-OSC32_OUT bidirectional GPIO PC15 (no Schmitt function) with alternate function OSC32_OUT for the 32.768 kHz crystal.
5 OSC_IN input HSE oscillator input (4-32 MHz crystal) or external clock input, alternate function HSE_CKI.
6 OSC_OUT output HSE oscillator output for the 4-32 MHz crystal.
7 NRST bidirectional Active-low system reset input; internal resets are also output on this pin with a pulse of at least 40 µs.
8 VSSA power_in Analog ground for the ADC and temperature sensor.
9 VDDA power_in Analog supply for the ADC and temperature sensor (1.8-3.6 V per section 3.12, 2-3.6 V per table 4-4).
10 PA0-WKUP bidirectional GPIO PA0 (no Schmitt function) with WKUP0, USART2_CTS, ADC12_IN0, TIM2_CH1_ETR, TIM5_CH1, TIM8_ETR and EXTIN0.
11 PA1 bidirectional GPIO PA1 with USART2_RTS, ADC12_IN1, TIM5_CH2, TIM2_CH2, EXTIN1 and RCC_CKI0.
12 PA2 bidirectional GPIO PA2 with USART2_TX, TIM5_CH3, ADC12_IN2, TIM2_CH3 and EXTIN2.
13 PA3 bidirectional GPIO PA3 with USART2_RX, TIM5_CH4, ADC12_IN3, TIM2_CH4 and EXTIN3.
14 PA4 bidirectional GPIO PA4 with SPI1_NSS, USART2_CK, ADC12_IN4 and EXTIN4.
15 PA5 bidirectional GPIO PA5 with SPI1_SCK, ADC12_IN5 and EXTIN5.
16 PA6 bidirectional GPIO PA6 with SPI1_MISO, ADC12_IN6, TIM3_CH1, EXTIN6 and TIM1_BKIN.
17 PA7 bidirectional GPIO PA7 with SPI1_MOSI, ADC12_IN7, TIM3_CH2, EXTIN7 and TIM1_CH1N.
18 PB0 bidirectional GPIO PB0 (no Schmitt function) with ADC12_IN8, TIM3_CH3, TIM1_CH2N and EXTIN0.
19 PB1 bidirectional GPIO PB1 with ADC12_IN9, TIM3_CH4, RCC_CKI1, TIM1_CH3N and EXTIN1.
20 PB2 bidirectional 5 V-tolerant GPIO PB2 with default function BOOT1 and EXTIN2.
21 PB10 bidirectional GPIO PB10 with I2C2_SCL, USART3_TX, TIM2_CH3 and EXTIN10.
22 PB11 bidirectional GPIO PB11 with I2C2_SDA, USART3_RX, TIM2_CH4 and EXTIN11.
23 VSS_1 power_in Digital ground.
24 VDD_1 power_in Digital supply for I/O pins and internal LDO (1.8-3.6 V per section 3.12, 2-3.6 V per table 4-4).
25 PB12 bidirectional 5 V-tolerant GPIO PB12 with SPI2_NSS, I2C2_SMBA, USART3_CK, TIM1_BKIN and EXTIN12.
26 PB13 bidirectional 5 V-tolerant GPIO PB13 with SPI2_SCK, USART3_CTS, TIM1_CH1N and EXTIN13.
27 PB14 bidirectional 5 V-tolerant GPIO PB14 with SPI2_MISO, TIM1_CH2N, USART3_RTS and EXTIN14.
28 PB15 bidirectional 5 V-tolerant GPIO PB15 with SPI2_MOSI, TIM1_CH3N and EXTIN15.
29 PA8 bidirectional 5 V-tolerant GPIO PA8 with USART1_CK, TIM1_CH1, MCO and EXTIN8.
30 PA9 bidirectional 5 V-tolerant GPIO PA9 with USART1_TX, TIM1_CH2 and EXTIN9.
31 PA10 bidirectional 5 V-tolerant GPIO PA10 with USART1_RX, TIM1_CH3 and EXTIN10.
32 PA11 bidirectional 5 V-tolerant GPIO PA11 with USART1_CTS, USBDM, CAN1_RX, TIM1_CH4 and EXTIN11.
33 PA12 bidirectional 5 V-tolerant GPIO PA12 with USART1_RTS, USBDP, CAN1_TX, TIM1_ETR and EXTIN12.
34 PA13 bidirectional 5 V-tolerant pin whose default function is JTMS-SWDIO (debug), also usable as GPIO PA13.
35 VSS_2 power_in Digital ground.
36 VDD_2 power_in Digital supply for I/O pins and internal LDO (1.8-3.6 V per section 3.12, 2-3.6 V per table 4-4).
37 PA14 bidirectional 5 V-tolerant pin whose default function is JTCK-SWCLK (debug), with EXTIN14 and GPIO PA14.
38 PA15 bidirectional 5 V-tolerant pin whose default function is JTDI, with EXTIN15, TIM2_CH1_ETR, SPI1_NSS and GPIO PA15.
39 PB3 bidirectional Pin whose default function is JTDO, with TRACESWO, TIM2_CH2, SPI1_SCK, EXTIN3 and GPIO PB3.
40 PB4 bidirectional Pin whose default function is NJTRST, with TIM3_CH1, SPI1_MISO, EXTIN4 and GPIO PB4.
41 PB5 bidirectional GPIO PB5 with I2C1_SMBA, TIM3_CH2, SPI1_MOSI and EXTIN5.
42 PB6 bidirectional GPIO PB6 with I2C1_SCL, TIM4_CH1, USART1_TX and EXTIN6.
43 PB7 bidirectional 5 V-tolerant GPIO PB7 with I2C1_SDA, TIM4_CH2, RCC_CKI3, USART1_RX and EXTIN7.
44 BOOT0 input Boot mode selection input (user Flash, system memory or SRAM boot).
45 PB8 bidirectional GPIO PB8 with TIM4_CH3, I2C1_SCL, CAN1_RX and EXTIN8.
46 PB9 bidirectional GPIO PB9 with TIM4_CH4, I2C1_SDA, CAN1_TX and EXTIN9.
47 VSS_3 power_in Digital ground.
48 VDD_3 power_in Digital supply for I/O pins and internal LDO (1.8-3.6 V per section 3.12, 2-3.6 V per table 4-4).

Key specifications

Parameter Value
Manufacturer HK
Package LQFP-48(7x7)
Category Single Chip Microcomputer/Microcontroller
Pins 48

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Main supply voltage (VDD-VSS) VDD−VSS -0.5 6 V 22
Voltage difference between different supply pins /ΔVDDx/ 50 mV 22
Voltage difference between different ground pins /VSSX − VSS/ 50 mV 22
Total current into VDD/VDDA IVDD 150 mA 22
Total current out of VSS IVSS 150 mA 22
Output sink current on any I/O or control pin IIO 25 mA 22
Output source current on any I/O or control pin IIO -25 mA 22
Injected current on a pin IINJ(PIN) -5 5 mA 22
Total injected current on all I/O and control pins ΣIINJ(PIN) -25 25 mA 22
Storage temperature TSTG -45 150 °C 22
Maximum junction temperature TJ 125 °C 22
AHB clock frequency fHCLK 0 120 MHz 23
APB1 clock frequency fPCLK1 0 60 MHz 23
APB2 clock frequency fPCLK2 0 120 MHz 23
Standard operating voltage VDD 2 3.6 V 23
Analog operating voltage VDDA 2 3.6 V 23
Backup domain operating voltage VBAT 1.8 3.6 V 23
Operating temperature T -40 105 °C 23
PVD threshold, rising edge VPVD 2.183 2.188 2.196 V PLS[2:0] = 000 23
PVD threshold, rising edge VPVD 2.958 2.969 2.979 V PLS[2:0] = 111 23
PVD threshold, falling edge VPVD 2.116 2.119 2.125 V PLS[2:0] = 000 23
PVD threshold, falling edge VPVD 2.798 2.805 2.817 V PLS[2:0] = 111 23
External HSE clock frequency fHSE_ext 1 8 25 MHz 24
HSE high/low time Tw(HSE) 5 ns 24
HSE rise/fall time Tr(HSE)/Tf(HSE) 20 ns 24
HSE duty cycle DuCy(HSE) 45 55 % 24
External LSE clock frequency FLSE_ext 32.768 1000 kHz 25
LSE high/low time Tw(LSE) 450 ns 25
LSE rise/fall time Tr(LSE)/Tf(LSE) 50 ns 25
LSE duty cycle DuCy(LSE) 30 70 % 25
HSI frequency fHSI 8 MHz 25
HSI duty cycle DuCy(HSI) 45 55 % 25
HSI accuracy, factory calibrated ACCHSI -2 2.5 % TA= -40 ~ +105 °C 25
HSI accuracy, factory calibrated ACCHSI -1.1 1.8 % TA = +25 °C 25
LSI frequency fLSI 30 40 60 kHz 25
LSI startup time tsu(LSI) 85 μs 25
PLL input clock frequency fPLL_IN 1 8 25 MHz 26
PLL output clock frequency fPLL_OUT 16 96 MHz 26
PLL lock time tLOCK 200 μs 26
PLL jitter Jitter 300 ps 26
Flash programming voltage Vprog 1.8 3.3 3.6 V 26
Input high level VIH 1.6 V VDD = 3.3V 26
Input low level VIL 1.5 V VDD = 3.3V 26
Input leakage current Ilkg 1 μA VDD = 3.3V, 0<VIN<3.3V 26
Pull-up resistor RPU 35 KΩ VIN = VSS 26
Pull-down resistor RPD 35 KΩ VIN = VDD 26
I/O pin capacitance CIO 5 pF 26
Max output frequency mode 10 fmax(IO)out 2 MHz CL = 50 pF, VDD = 2 V ~ 3.6 V 27
Max output frequency mode 01 fmax(IO)out 10 MHz CL = 50 pF, VDD = 2 V ~ 3.6 V 27
Max output frequency mode 11 fmax(IO)out 50 MHz CL = 50 pF, VDD = 2.7 V ~ 3.6 V 27
ADC supply VDDA 2 3.3 3.6 V 27
ADC integral nonlinearity INL 1.5 4 LSB fADC = 14 MHz, RAIN < 10 KΩ, VDDA = 2.4 ~ 3.6V 27
ADC differential nonlinearity DNL 1 3 LSB fADC = 14 MHz, RAIN <10KΩ, VDDA=2.4~3.6V 28
ADC clock frequency fADC 0.6 14 MHz 28
ADC sampling frequency fS 0.05 1 MHz 28
Temperature sensor average slope Avg_Slope 2.9 3 3.1 mV/℃ 28

CAD (KiCad official)

  • Symbol: HK32F103C8T6 EVB
  • Footprint: Package_QFP:LQFP-48_7x7mm_P0.5mm
  • 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: hk32f103c8t6-evb-etched.step / hk32f103c8t6-evb-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hk32f103c8t6-evb.step / hk32f103c8t6-evb.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HK datasheet (43 pp, sha256 58403da15b70e230, retrieved 2026-11-13, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF