component
HK32F103C8T6 EVB
Public Made by Adomby adom
HK Microcontroller Units (MCUs/MPUs/SOCs), LQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHK32F103C8T6 EVB
HK · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-48(7x7)
HK32F103C8T6 EVB from HK, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VBAT | power_in | Backup supply (1.8-3.6 V) that powers the RTC, external 32.768 kHz oscillator and backup registers when VDD is off. |
| 2 | PC13-TAMPER-RTC | bidirectional | GPIO PC13 (no Schmitt function) with alternate functions TAMPERIN/WKUP1/RTCO. |
| 3 | PC14-OSC32_IN | bidirectional | GPIO PC14 (no Schmitt function) with alternate function OSC32_IN/LSE_CKI for the 32.768 kHz crystal or external clock input. |
| 4 | PC15-OSC32_OUT | bidirectional | GPIO PC15 (no Schmitt function) with alternate function OSC32_OUT for the 32.768 kHz crystal. |
| 5 | OSC_IN | input | HSE oscillator input (4-32 MHz crystal) or external clock input, alternate function HSE_CKI. |
| 6 | OSC_OUT | output | HSE oscillator output for the 4-32 MHz crystal. |
| 7 | NRST | bidirectional | Active-low system reset input; internal resets are also output on this pin with a pulse of at least 40 µs. |
| 8 | VSSA | power_in | Analog ground for the ADC and temperature sensor. |
| 9 | VDDA | power_in | Analog supply for the ADC and temperature sensor (1.8-3.6 V per section 3.12, 2-3.6 V per table 4-4). |
| 10 | PA0-WKUP | bidirectional | GPIO PA0 (no Schmitt function) with WKUP0, USART2_CTS, ADC12_IN0, TIM2_CH1_ETR, TIM5_CH1, TIM8_ETR and EXTIN0. |
| 11 | PA1 | bidirectional | GPIO PA1 with USART2_RTS, ADC12_IN1, TIM5_CH2, TIM2_CH2, EXTIN1 and RCC_CKI0. |
| 12 | PA2 | bidirectional | GPIO PA2 with USART2_TX, TIM5_CH3, ADC12_IN2, TIM2_CH3 and EXTIN2. |
| 13 | PA3 | bidirectional | GPIO PA3 with USART2_RX, TIM5_CH4, ADC12_IN3, TIM2_CH4 and EXTIN3. |
| 14 | PA4 | bidirectional | GPIO PA4 with SPI1_NSS, USART2_CK, ADC12_IN4 and EXTIN4. |
| 15 | PA5 | bidirectional | GPIO PA5 with SPI1_SCK, ADC12_IN5 and EXTIN5. |
| 16 | PA6 | bidirectional | GPIO PA6 with SPI1_MISO, ADC12_IN6, TIM3_CH1, EXTIN6 and TIM1_BKIN. |
| 17 | PA7 | bidirectional | GPIO PA7 with SPI1_MOSI, ADC12_IN7, TIM3_CH2, EXTIN7 and TIM1_CH1N. |
| 18 | PB0 | bidirectional | GPIO PB0 (no Schmitt function) with ADC12_IN8, TIM3_CH3, TIM1_CH2N and EXTIN0. |
| 19 | PB1 | bidirectional | GPIO PB1 with ADC12_IN9, TIM3_CH4, RCC_CKI1, TIM1_CH3N and EXTIN1. |
| 20 | PB2 | bidirectional | 5 V-tolerant GPIO PB2 with default function BOOT1 and EXTIN2. |
| 21 | PB10 | bidirectional | GPIO PB10 with I2C2_SCL, USART3_TX, TIM2_CH3 and EXTIN10. |
| 22 | PB11 | bidirectional | GPIO PB11 with I2C2_SDA, USART3_RX, TIM2_CH4 and EXTIN11. |
| 23 | VSS_1 | power_in | Digital ground. |
| 24 | VDD_1 | power_in | Digital supply for I/O pins and internal LDO (1.8-3.6 V per section 3.12, 2-3.6 V per table 4-4). |
| 25 | PB12 | bidirectional | 5 V-tolerant GPIO PB12 with SPI2_NSS, I2C2_SMBA, USART3_CK, TIM1_BKIN and EXTIN12. |
| 26 | PB13 | bidirectional | 5 V-tolerant GPIO PB13 with SPI2_SCK, USART3_CTS, TIM1_CH1N and EXTIN13. |
| 27 | PB14 | bidirectional | 5 V-tolerant GPIO PB14 with SPI2_MISO, TIM1_CH2N, USART3_RTS and EXTIN14. |
| 28 | PB15 | bidirectional | 5 V-tolerant GPIO PB15 with SPI2_MOSI, TIM1_CH3N and EXTIN15. |
| 29 | PA8 | bidirectional | 5 V-tolerant GPIO PA8 with USART1_CK, TIM1_CH1, MCO and EXTIN8. |
| 30 | PA9 | bidirectional | 5 V-tolerant GPIO PA9 with USART1_TX, TIM1_CH2 and EXTIN9. |
| 31 | PA10 | bidirectional | 5 V-tolerant GPIO PA10 with USART1_RX, TIM1_CH3 and EXTIN10. |
| 32 | PA11 | bidirectional | 5 V-tolerant GPIO PA11 with USART1_CTS, USBDM, CAN1_RX, TIM1_CH4 and EXTIN11. |
| 33 | PA12 | bidirectional | 5 V-tolerant GPIO PA12 with USART1_RTS, USBDP, CAN1_TX, TIM1_ETR and EXTIN12. |
| 34 | PA13 | bidirectional | 5 V-tolerant pin whose default function is JTMS-SWDIO (debug), also usable as GPIO PA13. |
| 35 | VSS_2 | power_in | Digital ground. |
| 36 | VDD_2 | power_in | Digital supply for I/O pins and internal LDO (1.8-3.6 V per section 3.12, 2-3.6 V per table 4-4). |
| 37 | PA14 | bidirectional | 5 V-tolerant pin whose default function is JTCK-SWCLK (debug), with EXTIN14 and GPIO PA14. |
| 38 | PA15 | bidirectional | 5 V-tolerant pin whose default function is JTDI, with EXTIN15, TIM2_CH1_ETR, SPI1_NSS and GPIO PA15. |
| 39 | PB3 | bidirectional | Pin whose default function is JTDO, with TRACESWO, TIM2_CH2, SPI1_SCK, EXTIN3 and GPIO PB3. |
| 40 | PB4 | bidirectional | Pin whose default function is NJTRST, with TIM3_CH1, SPI1_MISO, EXTIN4 and GPIO PB4. |
| 41 | PB5 | bidirectional | GPIO PB5 with I2C1_SMBA, TIM3_CH2, SPI1_MOSI and EXTIN5. |
| 42 | PB6 | bidirectional | GPIO PB6 with I2C1_SCL, TIM4_CH1, USART1_TX and EXTIN6. |
| 43 | PB7 | bidirectional | 5 V-tolerant GPIO PB7 with I2C1_SDA, TIM4_CH2, RCC_CKI3, USART1_RX and EXTIN7. |
| 44 | BOOT0 | input | Boot mode selection input (user Flash, system memory or SRAM boot). |
| 45 | PB8 | bidirectional | GPIO PB8 with TIM4_CH3, I2C1_SCL, CAN1_RX and EXTIN8. |
| 46 | PB9 | bidirectional | GPIO PB9 with TIM4_CH4, I2C1_SDA, CAN1_TX and EXTIN9. |
| 47 | VSS_3 | power_in | Digital ground. |
| 48 | VDD_3 | power_in | Digital supply for I/O pins and internal LDO (1.8-3.6 V per section 3.12, 2-3.6 V per table 4-4). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HK |
| Package | LQFP-48(7x7) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 48 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Main supply voltage (VDD-VSS) | VDD−VSS | -0.5 | 6 | V | 22 | ||
| Voltage difference between different supply pins | /ΔVDDx/ | 50 | mV | 22 | |||
| Voltage difference between different ground pins | /VSSX − VSS/ | 50 | mV | 22 | |||
| Total current into VDD/VDDA | IVDD | 150 | mA | 22 | |||
| Total current out of VSS | IVSS | 150 | mA | 22 | |||
| Output sink current on any I/O or control pin | IIO | 25 | mA | 22 | |||
| Output source current on any I/O or control pin | IIO | -25 | mA | 22 | |||
| Injected current on a pin | IINJ(PIN) | -5 | 5 | mA | 22 | ||
| Total injected current on all I/O and control pins | ΣIINJ(PIN) | -25 | 25 | mA | 22 | ||
| Storage temperature | TSTG | -45 | 150 | °C | 22 | ||
| Maximum junction temperature | TJ | 125 | °C | 22 | |||
| AHB clock frequency | fHCLK | 0 | 120 | MHz | 23 | ||
| APB1 clock frequency | fPCLK1 | 0 | 60 | MHz | 23 | ||
| APB2 clock frequency | fPCLK2 | 0 | 120 | MHz | 23 | ||
| Standard operating voltage | VDD | 2 | 3.6 | V | 23 | ||
| Analog operating voltage | VDDA | 2 | 3.6 | V | 23 | ||
| Backup domain operating voltage | VBAT | 1.8 | 3.6 | V | 23 | ||
| Operating temperature | T | -40 | 105 | °C | 23 | ||
| PVD threshold, rising edge | VPVD | 2.183 | 2.188 | 2.196 | V | PLS[2:0] = 000 | 23 |
| PVD threshold, rising edge | VPVD | 2.958 | 2.969 | 2.979 | V | PLS[2:0] = 111 | 23 |
| PVD threshold, falling edge | VPVD | 2.116 | 2.119 | 2.125 | V | PLS[2:0] = 000 | 23 |
| PVD threshold, falling edge | VPVD | 2.798 | 2.805 | 2.817 | V | PLS[2:0] = 111 | 23 |
| External HSE clock frequency | fHSE_ext | 1 | 8 | 25 | MHz | 24 | |
| HSE high/low time | Tw(HSE) | 5 | ns | 24 | |||
| HSE rise/fall time | Tr(HSE)/Tf(HSE) | 20 | ns | 24 | |||
| HSE duty cycle | DuCy(HSE) | 45 | 55 | % | 24 | ||
| External LSE clock frequency | FLSE_ext | 32.768 | 1000 | kHz | 25 | ||
| LSE high/low time | Tw(LSE) | 450 | ns | 25 | |||
| LSE rise/fall time | Tr(LSE)/Tf(LSE) | 50 | ns | 25 | |||
| LSE duty cycle | DuCy(LSE) | 30 | 70 | % | 25 | ||
| HSI frequency | fHSI | 8 | MHz | 25 | |||
| HSI duty cycle | DuCy(HSI) | 45 | 55 | % | 25 | ||
| HSI accuracy, factory calibrated | ACCHSI | -2 | 2.5 | % | TA= -40 ~ +105 °C | 25 | |
| HSI accuracy, factory calibrated | ACCHSI | -1.1 | 1.8 | % | TA = +25 °C | 25 | |
| LSI frequency | fLSI | 30 | 40 | 60 | kHz | 25 | |
| LSI startup time | tsu(LSI) | 85 | μs | 25 | |||
| PLL input clock frequency | fPLL_IN | 1 | 8 | 25 | MHz | 26 | |
| PLL output clock frequency | fPLL_OUT | 16 | 96 | MHz | 26 | ||
| PLL lock time | tLOCK | 200 | μs | 26 | |||
| PLL jitter | Jitter | 300 | ps | 26 | |||
| Flash programming voltage | Vprog | 1.8 | 3.3 | 3.6 | V | 26 | |
| Input high level | VIH | 1.6 | V | VDD = 3.3V | 26 | ||
| Input low level | VIL | 1.5 | V | VDD = 3.3V | 26 | ||
| Input leakage current | Ilkg | 1 | μA | VDD = 3.3V, 0<VIN<3.3V | 26 | ||
| Pull-up resistor | RPU | 35 | KΩ | VIN = VSS | 26 | ||
| Pull-down resistor | RPD | 35 | KΩ | VIN = VDD | 26 | ||
| I/O pin capacitance | CIO | 5 | pF | 26 | |||
| Max output frequency mode 10 | fmax(IO)out | 2 | MHz | CL = 50 pF, VDD = 2 V ~ 3.6 V | 27 | ||
| Max output frequency mode 01 | fmax(IO)out | 10 | MHz | CL = 50 pF, VDD = 2 V ~ 3.6 V | 27 | ||
| Max output frequency mode 11 | fmax(IO)out | 50 | MHz | CL = 50 pF, VDD = 2.7 V ~ 3.6 V | 27 | ||
| ADC supply | VDDA | 2 | 3.3 | 3.6 | V | 27 | |
| ADC integral nonlinearity | INL | 1.5 | 4 | LSB | fADC = 14 MHz, RAIN < 10 KΩ, VDDA = 2.4 ~ 3.6V | 27 | |
| ADC differential nonlinearity | DNL | 1 | 3 | LSB | fADC = 14 MHz, RAIN <10KΩ, VDDA=2.4~3.6V | 28 | |
| ADC clock frequency | fADC | 0.6 | 14 | MHz | 28 | ||
| ADC sampling frequency | fS | 0.05 | 1 | MHz | 28 | ||
| Temperature sensor average slope | Avg_Slope | 2.9 | 3 | 3.1 | mV/℃ | 28 |
CAD (KiCad official)
- Symbol:
HK32F103C8T6 EVB - Footprint:
Package_QFP:LQFP-48_7x7mm_P0.5mm - 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
hk32f103c8t6-evb-etched.step/hk32f103c8t6-evb-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hk32f103c8t6-evb.step/hk32f103c8t6-evb.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HK datasheet (43 pp, sha256
58403da15b70e230, retrieved 2026-11-13, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).