main
Ray
Publish 0.1.0
86a019a
HK24C32HA-USR-B
HK · EEPROM · SOP-8
HK24C32HA-USR-B from HK, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | input | Device address input (chip select) that is typically hardwired to VIH or VIL and is internally recognized as VIL if left unconnected. |
| 2 | A1 | input | Device address input (chip select) that is typically hardwired to VIH or VIL and is internally recognized as VIL if left unconnected. |
| 3 | A2 | input | Device address input (chip select) that is typically hardwired to VIH or VIL and is internally recognized as VIL if left unconnected. |
| 4 | GND | power_in | Ground reference; input voltage on any pin is rated -0.3V to VCC + 0.3V relative to ground. |
| 5 | SDA | bidirectional | Serial data input / open-drain output, a bi-directional line that can be wired-OR with other open-drain devices and is typically pulled high by an external resistor. |
| 6 | SCL | input | Serial clock input whose rising edge latches data into the EEPROM and whose falling edge clocks data out. |
| 7 | WP | input | Write protect input: programming is allowed when left unconnected or at VIL, and all programming is disabled when connected to VIH or VCC, while reads are unaffected. |
| 8 | VCC | power_in | Power supply pin with a 1.8V to 5.5V operating range. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HK |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply | VCC | 1.8 | 5.5 | V | 11 | ||
| Supply read current | ICC | 0.2 | 0.4 | mA | VCC @ 5.0V SCL = 400 kHz | 11 | |
| Supply write current | ICC | 0.3 | 0.5 | mA | VCC @ 5.0V SCL = 400 kHz | 11 | |
| Standby supply current 1.8V | ISB1 | 0.1 | μA | VCC @ 1.8V, VIN = VCC or VSS | 11 | ||
| Standby supply current 2.5V | ISB2 | 0.1 | μA | VCC @ 2.5V, VIN = VCC or VSS | 11 | ||
| Standby supply current 5.0V | ISB3 | 0.03 | 0.1 | μA | VCC @ 5.0V, VIN = VCC or VSS | 11 | |
| Input leakage current | IIL | 3 | μA | VIN = VCC or VSS | 11 | ||
| Output leakage current | ILO | 3 | μA | VIN = VCC or VSS | 11 | ||
| Input low level | VIL | -0.6 | 0.3 | V | max printed as VCCx0.3 (value is a multiplier of VCC) | 11 | |
| Input high level | VIH | 0.7 | 0.5 | V | min printed as VCCx0.7; max printed as VCC+0.5 | 11 | |
| Output low level 1 | VOL1 | 0.2 | V | VCC @ 1.8V, IOL = 0.15 mA | 11 | ||
| Output low level 2 | VOL2 | 0.4 | V | VCC @ 3.0V, IOL = 2.1 mA | 11 | ||
| Write cycle time | tWR | 5 | ms | 10 | |||
| Endurance | 1e+06 | Write Cycles | 25℃, Page Mode, 3.3V | 10 | |||
| Input voltage on any pin relative to ground | -0.3 | V | max printed as VCC + 0.3V | 2 | |||
| Maximum voltage | 8 | V | 2 | ||||
| Storage temperature | -50 | 125 | ℃ | 2 | |||
| Industrial operating temperature | -40 | 85 | ℃ | 2 | |||
| ESD protection on all pins | 2000 | V | >2000V | 2 |
CAD (KiCad official)
- Symbol:
HK24C32HA-USR-B - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
hk24c32ha-usr-b-etched.step/hk24c32ha-usr-b-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hk24c32ha-usr-b.step/hk24c32ha-usr-b.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HK datasheet (17 pp, sha256
29b80d679fd11e14, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HK24C32HA-USR-B
**HK** · EEPROM · SOP-8
HK24C32HA-USR-B from HK, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | input | Device address input (chip select) that is typically hardwired to VIH or VIL and is internally recognized as VIL if left unconnected. |
| 2 | A1 | input | Device address input (chip select) that is typically hardwired to VIH or VIL and is internally recognized as VIL if left unconnected. |
| 3 | A2 | input | Device address input (chip select) that is typically hardwired to VIH or VIL and is internally recognized as VIL if left unconnected. |
| 4 | GND | power_in | Ground reference; input voltage on any pin is rated -0.3V to VCC + 0.3V relative to ground. |
| 5 | SDA | bidirectional | Serial data input / open-drain output, a bi-directional line that can be wired-OR with other open-drain devices and is typically pulled high by an external resistor. |
| 6 | SCL | input | Serial clock input whose rising edge latches data into the EEPROM and whose falling edge clocks data out. |
| 7 | WP | input | Write protect input: programming is allowed when left unconnected or at VIL, and all programming is disabled when connected to VIH or VCC, while reads are unaffected. |
| 8 | VCC | power_in | Power supply pin with a 1.8V to 5.5V operating range. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HK |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply | VCC | 1.8 | | 5.5 | V | | 11 |
| Supply read current | ICC | | 0.2 | 0.4 | mA | VCC @ 5.0V SCL = 400 kHz | 11 |
| Supply write current | ICC | | 0.3 | 0.5 | mA | VCC @ 5.0V SCL = 400 kHz | 11 |
| Standby supply current 1.8V | ISB1 | | | 0.1 | μA | VCC @ 1.8V, VIN = VCC or VSS | 11 |
| Standby supply current 2.5V | ISB2 | | | 0.1 | μA | VCC @ 2.5V, VIN = VCC or VSS | 11 |
| Standby supply current 5.0V | ISB3 | | 0.03 | 0.1 | μA | VCC @ 5.0V, VIN = VCC or VSS | 11 |
| Input leakage current | IIL | | | 3 | μA | VIN = VCC or VSS | 11 |
| Output leakage current | ILO | | | 3 | μA | VIN = VCC or VSS | 11 |
| Input low level | VIL | -0.6 | | 0.3 | V | max printed as VCCx0.3 (value is a multiplier of VCC) | 11 |
| Input high level | VIH | 0.7 | | 0.5 | V | min printed as VCCx0.7; max printed as VCC+0.5 | 11 |
| Output low level 1 | VOL1 | | | 0.2 | V | VCC @ 1.8V, IOL = 0.15 mA | 11 |
| Output low level 2 | VOL2 | | | 0.4 | V | VCC @ 3.0V, IOL = 2.1 mA | 11 |
| Write cycle time | tWR | | | 5 | ms | | 10 |
| Endurance | | 1e+06 | | | Write Cycles | 25℃, Page Mode, 3.3V | 10 |
| Input voltage on any pin relative to ground | | -0.3 | | | V | max printed as VCC + 0.3V | 2 |
| Maximum voltage | | | | 8 | V | | 2 |
| Storage temperature | | -50 | | 125 | ℃ | | 2 |
| Industrial operating temperature | | -40 | | 85 | ℃ | | 2 |
| ESD protection on all pins | | 2000 | | | V | >2000V | 2 |
## CAD (KiCad official)
- Symbol: `HK24C32HA-USR-B`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `hk24c32ha-usr-b-etched.step` / `hk24c32ha-usr-b-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hk24c32ha-usr-b.step` / `hk24c32ha-usr-b.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HK datasheet](docs/hk24c32ha-usr-b-datasheet.pdf) (17 pp, sha256 `29b80d679fd11e14`, retrieved 2026-10-27, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hk24c32ha-usr-b-datasheet.pdf)