main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers hk24c32ha-usr-b: viewers · Ray
hk24c32ha-usr-b-etched.glb Publish 0.1.0 · Ray
hk24c32ha-usr-b-etched.step hk24c32ha-usr-b: factory component page (tier=lcsc) · Ray
hk24c32ha-usr-b-hero.glb hk24c32ha-usr-b: hero GLB from the etched model (keeps the MPN mark) · Ray
hk24c32ha-usr-b-hero.overlay.json Publish 0.1.0 · Ray
hk24c32ha-usr-b.glb Publish 0.1.0 · Ray
hk24c32ha-usr-b.kicad_mod Publish 0.1.0 · Ray
hk24c32ha-usr-b.kicad_sym Publish 0.1.0 · Ray
hk24c32ha-usr-b.lbr Publish 0.1.0 · Ray
hk24c32ha-usr-b.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

HK24C32HA-USR-B

HK · EEPROM · SOP-8

HK24C32HA-USR-B from HK, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 A0 input Device address input (chip select) that is typically hardwired to VIH or VIL and is internally recognized as VIL if left unconnected.
2 A1 input Device address input (chip select) that is typically hardwired to VIH or VIL and is internally recognized as VIL if left unconnected.
3 A2 input Device address input (chip select) that is typically hardwired to VIH or VIL and is internally recognized as VIL if left unconnected.
4 GND power_in Ground reference; input voltage on any pin is rated -0.3V to VCC + 0.3V relative to ground.
5 SDA bidirectional Serial data input / open-drain output, a bi-directional line that can be wired-OR with other open-drain devices and is typically pulled high by an external resistor.
6 SCL input Serial clock input whose rising edge latches data into the EEPROM and whose falling edge clocks data out.
7 WP input Write protect input: programming is allowed when left unconnected or at VIL, and all programming is disabled when connected to VIH or VCC, while reads are unaffected.
8 VCC power_in Power supply pin with a 1.8V to 5.5V operating range.

Key specifications

Parameter Value
Manufacturer HK
Package SOP-8
Category Memory
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power supply VCC 1.8 5.5 V 11
Supply read current ICC 0.2 0.4 mA VCC @ 5.0V SCL = 400 kHz 11
Supply write current ICC 0.3 0.5 mA VCC @ 5.0V SCL = 400 kHz 11
Standby supply current 1.8V ISB1 0.1 μA VCC @ 1.8V, VIN = VCC or VSS 11
Standby supply current 2.5V ISB2 0.1 μA VCC @ 2.5V, VIN = VCC or VSS 11
Standby supply current 5.0V ISB3 0.03 0.1 μA VCC @ 5.0V, VIN = VCC or VSS 11
Input leakage current IIL 3 μA VIN = VCC or VSS 11
Output leakage current ILO 3 μA VIN = VCC or VSS 11
Input low level VIL -0.6 0.3 V max printed as VCCx0.3 (value is a multiplier of VCC) 11
Input high level VIH 0.7 0.5 V min printed as VCCx0.7; max printed as VCC+0.5 11
Output low level 1 VOL1 0.2 V VCC @ 1.8V, IOL = 0.15 mA 11
Output low level 2 VOL2 0.4 V VCC @ 3.0V, IOL = 2.1 mA 11
Write cycle time tWR 5 ms 10
Endurance 1e+06 Write Cycles 25℃, Page Mode, 3.3V 10
Input voltage on any pin relative to ground -0.3 V max printed as VCC + 0.3V 2
Maximum voltage 8 V 2
Storage temperature -50 125 ℃ 2
Industrial operating temperature -40 85 ℃ 2
ESD protection on all pins 2000 V >2000V 2

CAD (KiCad official)

  • Symbol: HK24C32HA-USR-B
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: hk24c32ha-usr-b-etched.step / hk24c32ha-usr-b-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hk24c32ha-usr-b.step / hk24c32ha-usr-b.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HK datasheet (17 pp, sha256 29b80d679fd11e14, retrieved 2026-10-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF