main
Ray
Publish 0.1.0
4957600
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247
{
"slug": "hi5000h",
"version": "0.1.0",
"type": "component",
"description": "Hichips(智芯) , HTSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"ic",
"hi5000h",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"hi5000h.kicad_sym",
"hi5000h.kicad_mod",
"hi5000h.glb",
"hi5000h.step",
"hi5000h.lbr",
"docs/hero.png",
"docs/hi5000h-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"hi5000h-hero.glb",
"hi5000h-hero.overlay.json",
"hi5000h-etched.glb"
],
"component": {
"mpn": "Hi5000H",
"manufacturer": "Hichips(智芯)",
"package": "HTSSOP-16",
"pin_count": 17,
"category": "IC",
"subcategory": "IC",
"datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8757956127982133248",
"parts": {
"symbol": "hi5000h.kicad_sym",
"footprint": "hi5000h.kicad_mod",
"model_3d": "hi5000h-hero.glb",
"model_3d_plain": "hi5000h-etched.glb",
"model_3d_step": "hi5000h-etched.step",
"model_3d_step_plain": "hi5000h.step",
"lbr": "hi5000h.lbr"
},
"distributor_links": {
"lcsc": "C22395781"
},
"distributor_check": {
"checked_at": "2026-10-31T06:15:52Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"pins": [
{
"number": "1",
"name": "CLPF",
"type": "passive",
"description": "Reference filter capacitor pin (datasheet table prints it as CPLF; Fig. 5.2 and the QFN table use CLPF), placed close to the pin and its GND return per the PCB notes."
},
{
"number": "2",
"name": "COMP",
"type": "passive",
"description": "Loop compensation pin; the application circuit uses an RC network (e.g. 20K + 10nF in parallel with 100pF) connected here."
},
{
"number": "3",
"name": "VDD",
"type": "power_out",
"description": "Internal regulated supply, clamped at about 5.8 V; a bypass capacitor of 1.0 µF or more must be placed right beside the pin, sized up for larger gate-drive MOSFETs."
},
{
"number": "4",
"name": "LD",
"type": "input",
"description": "Analog dimming input accepting 0.2 V to 2.5 V (chip enabled above 200 mV, off below 100 mV), with an internal pull-up so it may be left floating; a capacitor to GND sets the soft-start time."
},
{
"number": "5",
"name": "DIM",
"type": "input",
"description": "PWM-to-analog dimming and low-standby enable input with internal pull-up; a low level longer than 80 ms puts the chip into standby below 80 uA, and the input may be left floating."
},
{
"number": "6",
"name": "NC",
"type": "unconnected",
"description": "No internal connection; leave floating."
},
{
"number": "7",
"name": "CS",
"type": "input",
"description": "Cycle-by-cycle peak current-limit sense input referenced to the sense resistor to GND, rated for -0.3 V to 60 V and limited to about 340 mV."
},
{
"number": "8",
"name": "GND",
"type": "power_in",
"description": "Internal chip ground, which is also tied to the exposed pad (EP); keep single-point connection to the CS sense resistor GND and the VDD/CLPF capacitor grounds."
},
{
"number": "9",
"name": "GATE",
"type": "output",
"description": "Gate drive output for the external power NMOS, with pull-up current of about 400 mA and pull-down current of about 600 mA; rated -0.3 V to 60 V."
},
{
"number": "10",
"name": "NC",
"type": "unconnected",
"description": "No internal connection; leave floating."
},
{
"number": "11",
"name": "VIN",
"type": "power_in",
"description": "High-voltage supply input for the chip (6.5 V to 75 V operating range, absolute maximum -0.3 V to 80 V); a sensitive node to keep away from switching nodes."
},
{
"number": "12",
"name": "ISENSEP",
"type": "input",
"description": "Positive input of the output-current sense resistor, rated -0.3 V to 80 V absolute maximum; a sensitive node to keep away from switching nodes."
},
{
"number": "13",
"name": "ISENSEN",
"type": "input",
"description": "Negative input of the output-current sense resistor, rated -0.3 V to 80 V absolute maximum; output current is set as 0.251 V divided by the sense resistor."
},
{
"number": "14",
"name": "UVLO",
"type": "input",
"description": "Input undervoltage-protection set pin with internal pull-up; the GATE output turns off below 1.1 V and restarts above 1.2 V (0.1 V hysteresis)."
},
{
"number": "15",
"name": "PWM",
"type": "input",
"description": "PWM dimming input with internal pull-up (high when floating), thresholds 1.2 V rising and 0.8 V falling, able to respond to pulses shorter than 60 ns."
},
{
"number": "16",
"name": "VFB",
"type": "input",
"description": "Output overvoltage-protection sense input with internal pull-down (may be left floating); GATE turns off above 1.2 V and restarts below 1.1 V (0.1 V hysteresis)."
},
{
"number": "17",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Pin 1 name is printed as 'CPLF' in the HTSSOP16 table on page 3 but as 'CLPF' in the QFN table and F; The Fig. 5.2 text layer for the HTSSOP16 drawing places 'VFB' next to pin 1, which conflicts with th; The exposed pad (EP) is listed together with pin 8 as GND but is not a numbered pin, so it is not gi",
"exposed pad 17 added from the footprint"
],
"pages_sent": 16,
"cost_usd": 0.0778,
"at": "2026-10-31T06:15:40"
},
"datasheet": {
"url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8757956127982133248",
"pages": 16,
"sha256": "2ef53dfb27cd8d54",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 17,
"described": 17,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "hi5000h.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.4,
5.0,
1.1
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "7982746831c0bd23f4690608869ad67776faae5c762fb0376666126a3998921b",
"checked": "2026-10-31",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "hi5000h-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.4,
5.0,
1.1
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "ebdca9949e9b9b470c34b8ee487be94d5ad61f8d72e483addf697314cf819b6e",
"checked": "2026-10-31",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}