Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

HGX13433EIM

HGSEMI · RS-485 / RS-422 ICs · SOP-14

HGX13433EIM from HGSEMI, in a SOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VL power_in Logic-interface supply input (1.62 V to VCC). Powers the low-voltage logic side (including RO output). Bypass to GND with a 0.1 µF capacitor placed as close to the pin as possible.
2 RO output Receiver output. When receiver is enabled: RO is high if V(A)-V(B) > -50 mV, low if V(A)-V(B) < -200 mV. Output swings between GND and VL.
3 DE input Driver output enable (active high). DE=high enables the driver; DE=low places Y/Z outputs in high-impedance. With RE=high and DE=low the chip enters low-power shutdown.
4 RE input Receiver output enable, active low (RE with overbar). RE=low enables RO; RE=high disables the receiver. With RE=high and DE=low the chip enters low-power shutdown.
5 DI input Driver input. DI=low forces Y=low and Z=high; DI=high forces Y=high and Z=low. Logic levels referenced to VL (VIH ≥ 2/3·VL, VIL ≤ 1/3·VL).
6 GND power_in Ground reference. Tie to system ground; internally common with pin 8.
7 NC unconnected No connect. Leave floating or tie to GND per PCB convention; not internally bonded to any function.
8 GND power_in Ground reference. Tie to system ground; internally common with pin 6.
9 Y bidirectional Driver non-inverting output / receiver non-inverting input on the transmit-pair side (full-duplex RS-422). Bus pin, rated -8 V to +13 V, ±15 kV HBM ESD.
10 Z bidirectional Driver inverting output / receiver inverting input on the transmit-pair side (full-duplex RS-422). Bus pin, rated -8 V to +13 V, ±15 kV HBM ESD.
11 B input Receiver inverting input (receive pair). 1/8 unit-load input impedance (typ. 96 kΩ), allowing up to 256 transceivers on the bus. Bus pin, ±15 kV HBM / ±12 kV IEC 61000-4-2 contact ESD.
12 A input Receiver non-inverting input (receive pair). 1/8 unit-load input impedance (typ. 96 kΩ). Bus pin, ±15 kV HBM / ±12 kV IEC 61000-4-2 contact ESD.
13 NC unconnected No connect. Leave floating or tie to GND per PCB convention; not internally bonded to any function.
14 VCC power_in Positive supply, 3.0 V to 5.5 V (typ. 3.3 V/5 V). Bypass to GND with a 0.1 µF capacitor placed close to the pin.

Key specifications

Parameter Value
Manufacturer HGSEMI
Package SOP-14
Category Interface
Pins 14

Ordering variants

Same part, different packaging or reel option.

  • HGX13433EIM/TR
  • HGX13433EIMT/TR

CAD (KiCad official)

  • Symbol: HGX13433EIM
  • Footprint: Package_SO:SOIC-14_3.9x8.7mm_P1.27mm
  • 3D model: SOP-14 (KiCad packages3D, STEP)
  • 3D model files: hgx13433eim-etched.step / hgx13433eim-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hgx13433eim.step / hgx13433eim.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HGSEMI datasheet (None pp, sha256 72c83ad22f74e434, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF