main
Ray
hgv6042m: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body wi…
41e8082
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165
{
"slug": "hgv6042m",
"version": "0.1.0",
"type": "component",
"description": "HGSEMI Operational Amplifier, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"op-amp-cmp",
"hgv6042m"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"hgv6042m.kicad_sym",
"hgv6042m.kicad_mod",
"hgv6042m.glb",
"hgv6042m.step",
"hgv6042m.lbr",
"docs/hero.png",
"docs/hgv6042m-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"hgv6042m-etched.step"
],
"visibility": {
"public": true
},
"author": {
"name": "Ray"
},
"component": {
"mpn": "HGV6042M",
"manufacturer": "HGSEMI",
"package": "SOP-8",
"pin_count": 8,
"category": "Operational Amplifier",
"parts": {
"symbol": "hgv6042m.kicad_sym",
"footprint": "hgv6042m.kicad_mod",
"model_3d": "hgv6042m-etched.glb",
"model_3d_plain": "hgv6042m.glb",
"model_3d_step": "hgv6042m-etched.step",
"model_3d_step_plain": "hgv6042m.step",
"lbr": "hgv6042m.lbr"
},
"pins": [
{
"number": "1",
"name": "OUTA",
"type": "output",
"description": "Amplifier A output. Rail-to-rail push-pull output; typically swings to within ~50 mV of either supply rail into light resistive loads (>50 kΩ), with typical source/sink current of 20 mA into a 10 Ω load to VS/2."
},
{
"number": "2",
"name": "INA-",
"type": "input",
"description": "Amplifier A inverting input. High-impedance CMOS input with ~1 pA typical bias current; usable common-mode range extends from VSS-0.1 V to VDD+0.1 V."
},
{
"number": "3",
"name": "INA+",
"type": "input",
"description": "Amplifier A non-inverting input. High-impedance CMOS input with ~1 pA typical bias current; rail-to-rail common-mode range (VSS-0.1 V to VDD+0.1 V)."
},
{
"number": "4",
"name": "VSS",
"type": "power_in",
"description": "Negative supply / ground. In single-supply operation tie to GND; in dual-supply operation this is the negative rail (as low as -2.75 V, with VDD-VSS ≤ 5.5 V operating, 7.5 V absolute maximum). Bypass to ground with a 0.1 µF ceramic capacitor when used as a negative rail."
},
{
"number": "5",
"name": "INB+",
"type": "input",
"description": "Amplifier B non-inverting input. High-impedance CMOS input with ~1 pA typical bias current; rail-to-rail common-mode range (VSS-0.1 V to VDD+0.1 V)."
},
{
"number": "6",
"name": "INB-",
"type": "input",
"description": "Amplifier B inverting input. High-impedance CMOS input with ~1 pA typical bias current; usable common-mode range extends from VSS-0.1 V to VDD+0.1 V."
},
{
"number": "7",
"name": "OUTB",
"type": "output",
"description": "Amplifier B output. Rail-to-rail push-pull output; typically swings to within ~50 mV of either supply rail into light resistive loads (>50 kΩ), with typical source/sink current of 20 mA into a 10 Ω load to VS/2."
},
{
"number": "8",
"name": "VDD",
"type": "power_in",
"description": "Positive supply. Operating range 1.4 V to 5.5 V (VDD-VSS), absolute maximum 7.5 V. Place a 0.1 µF ceramic bypass capacitor close to this pin for best performance."
}
],
"provenance": {
"rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"distributor_links": {
"digikey": false,
"mouser": false
},
"distributor_check": {
"checked_at": "2026-10-05T18:59:49Z",
"source": "Component Ocean /api/assign-pns + lcsc_map",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"models_3d": [
{
"file": "hgv6042m.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "hgv6042m-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "d6c20e82911c5df8b5f2bcb22d2002fb3780f798dd9579cffee7cb05db25eb99",
"checked": "2026-11-03",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}