main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs hgv6042m: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers hgv6042m: viewers · Ray
hgv6042m-etched.fit.json hgv6042m: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
hgv6042m-etched.glb hgv6042m: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body wi… · Ray
hgv6042m-etched.step hgv6042m: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body wi… · Ray
hgv6042m.glb Publish 0.1.0 · Ray
hgv6042m.kicad_mod Publish 0.1.0 · Ray
hgv6042m.kicad_sym Publish 0.1.0 · Ray
hgv6042m.lbr Publish 0.1.0 · Ray
hgv6042m.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json hgv6042m: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body wi… · Ray
README.md hgv6042m: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

HGV6042M

HGSEMI · Operational Amplifier · SOP-8

HGV6042M from HGSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUTA output Amplifier A output. Rail-to-rail push-pull output; typically swings to within ~50 mV of either supply rail into light resistive loads (>50 kΩ), with typical source/sink current of 20 mA into a 10 Ω load to VS/2.
2 INA- input Amplifier A inverting input. High-impedance CMOS input with ~1 pA typical bias current; usable common-mode range extends from VSS-0.1 V to VDD+0.1 V.
3 INA+ input Amplifier A non-inverting input. High-impedance CMOS input with ~1 pA typical bias current; rail-to-rail common-mode range (VSS-0.1 V to VDD+0.1 V).
4 VSS power_in Negative supply / ground. In single-supply operation tie to GND; in dual-supply operation this is the negative rail (as low as -2.75 V, with VDD-VSS ≤ 5.5 V operating, 7.5 V absolute maximum). Bypass to ground with a 0.1 µF ceramic capacitor when used as a negative rail.
5 INB+ input Amplifier B non-inverting input. High-impedance CMOS input with ~1 pA typical bias current; rail-to-rail common-mode range (VSS-0.1 V to VDD+0.1 V).
6 INB- input Amplifier B inverting input. High-impedance CMOS input with ~1 pA typical bias current; usable common-mode range extends from VSS-0.1 V to VDD+0.1 V.
7 OUTB output Amplifier B output. Rail-to-rail push-pull output; typically swings to within ~50 mV of either supply rail into light resistive loads (>50 kΩ), with typical source/sink current of 20 mA into a 10 Ω load to VS/2.
8 VDD power_in Positive supply. Operating range 1.4 V to 5.5 V (VDD-VSS), absolute maximum 7.5 V. Place a 0.1 µF ceramic bypass capacitor close to this pin for best performance.

Key specifications

Parameter Value
Manufacturer HGSEMI
Package SOP-8
Category Op-amp/Cmp
Pins 8

Ordering variants

  • HGV6042M/TR
  • HGV6042MM/TR

CAD (KiCad official)

  • Symbol: HGV6042M
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: hgv6042m-etched.step / hgv6042m-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hgv6042m.step / hgv6042m.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HGSEMI datasheet (None pp, sha256 02d60896f00f702f, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF