main
Ray
hg9200am: laser-etched CAD + chip hero (factory 2.0.0 backfill)
60cffe0
HG9200AM
HGSEMI · Audio Interface ICs · SOP-8
HG9200AM from HGSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CE | input | Chip enable, active low. CMOS input with internal pull-high resistor. When CE is pulled low, the oscillator starts and the DTMF signal is transmitted from the DTMF pin. |
| 2 | X2 | output | Oscillator output. Together with X1 forms the 3.579545 MHz crystal oscillator using an on-chip inverter, bias resistor, and load capacitance. |
| 3 | X1 | input | Oscillator input. Connect a standard 3.579545 MHz crystal between X1 and X2 to implement the system clock. Internal ~10 MΩ feedback bias resistor and integrated load capacitors (~20 pF / ~10 pF). |
| 4 | VSS | power_in | Negative power supply / ground reference. Tie to system ground (0 V). |
| 5 | CLK | input | Data synchronous clock input for serial mode. CMOS input with internal pull-high resistor. Serial data on DATA is latched on the falling edge of CLK. Max clock rate 500 kHz (typ 100 kHz). |
| 6 | DATA | input | Serial data input. CMOS input with internal pull-high resistor. Each DTMF digit is selected by a 5-bit serial code (D0 = LSB, D4 = MSB) clocked in on CLK falling edges. |
| 7 | DTMF | output | DTMF signal output. CMOS analog output; typical AC level 0.15 Vrms into 5 kΩ load. DC level 0.45·VDD to 0.75·VDD. Drives external audio/telephone line interface. |
| 8 | VDD | power_in | Positive power supply. Operating range 2.0 V to 5.5 V. Absolute maximum 6 V. Typical operating current 240 µA at 2.5 V, 950 µA at 5.0 V; standby current ≤2 µA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | SOP-8 |
| Category | Interface |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
HG9200AMM/TRHG9200AMMHG9200AMNHG9200AMBM/TR
CAD (KiCad official)
- Symbol:
HG9200AM - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
hg9200am-etched.step/hg9200am-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hg9200am.step/hg9200am.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (12 pp, sha256
e155baa26afbb02c, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HG9200AM
**HGSEMI** · Audio Interface ICs · SOP-8
HG9200AM from HGSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CE | input | Chip enable, active low. CMOS input with internal pull-high resistor. When CE is pulled low, the oscillator starts and the DTMF signal is transmitted from the DTMF pin. |
| 2 | X2 | output | Oscillator output. Together with X1 forms the 3.579545 MHz crystal oscillator using an on-chip inverter, bias resistor, and load capacitance. |
| 3 | X1 | input | Oscillator input. Connect a standard 3.579545 MHz crystal between X1 and X2 to implement the system clock. Internal ~10 MΩ feedback bias resistor and integrated load capacitors (~20 pF / ~10 pF). |
| 4 | VSS | power_in | Negative power supply / ground reference. Tie to system ground (0 V). |
| 5 | CLK | input | Data synchronous clock input for serial mode. CMOS input with internal pull-high resistor. Serial data on DATA is latched on the falling edge of CLK. Max clock rate 500 kHz (typ 100 kHz). |
| 6 | DATA | input | Serial data input. CMOS input with internal pull-high resistor. Each DTMF digit is selected by a 5-bit serial code (D0 = LSB, D4 = MSB) clocked in on CLK falling edges. |
| 7 | DTMF | output | DTMF signal output. CMOS analog output; typical AC level 0.15 Vrms into 5 kΩ load. DC level 0.45·VDD to 0.75·VDD. Drives external audio/telephone line interface. |
| 8 | VDD | power_in | Positive power supply. Operating range 2.0 V to 5.5 V. Absolute maximum 6 V. Typical operating current 240 µA at 2.5 V, 950 µA at 5.0 V; standby current ≤2 µA. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | SOP-8 |
| Category | Interface |
| Pins | 8 |
## Ordering variants
Same part, different packaging or reel option.
- `HG9200AMM/TR`
- `HG9200AMM`
- `HG9200AMN`
- `HG9200AMBM/TR`
## CAD (KiCad official)
- Symbol: `HG9200AM`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `hg9200am-etched.step` / `hg9200am-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hg9200am.step` / `hg9200am.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HGSEMI datasheet](docs/hg9200am-datasheet.pdf) (12 pp, sha256 `e155baa26afbb02c`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hg9200am-datasheet.pdf)