main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers hg7500bm: viewers rendered from the public page · Ray
hg7500bm-etched.glb hg7500bm: factory component page (tier=lcsc) · Ray
hg7500bm-etched.step hg7500bm: factory component page (tier=lcsc) · Ray
hg7500bm-hero.glb hg7500bm: hero GLB from the etched model (keeps the MPN mark) · Ray
hg7500bm-hero.overlay.json hg7500bm: hero GLB from the etched model (keeps the MPN mark) · Ray
hg7500bm.glb Publish 0.1.0 · Ray
hg7500bm.kicad_mod Publish 0.1.0 · Ray
hg7500bm.kicad_sym Publish 0.1.0 · Ray
hg7500bm.lbr Publish 0.1.0 · Ray
hg7500bm.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 16 pins · Ray

HG7500BM

HGSEMI · AC-DC Controllers & Regulators · SOP-16

HG7500BM from HGSEMI, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 AMPERR1+ input Non-inverting input of error amplifier 1; input voltage is limited by the absolute maximum rating of VI = Vcc+0.3 V.
2 AMPERR1- input Inverting input of error amplifier 1; input voltage is limited by the absolute maximum rating of VI = Vcc+0.3 V.
3 INCPWM input PWM comparison input that sets the pulse-width modulation comparison point; the datasheet gives no separate limit for this pin.
4 CONTDE input Dead-time control input; the datasheet gives threshold voltages of 3.0-3.3 V and 3.9-4.2 V for the duty-cycle conditions in the dead-time section.
5 COSC passive Oscillator timing capacitor connection; the oscillator frequency is specified with CT = 0.01 µF and RT = 12k.
6 ROSC passive Oscillator timing resistor connection; the oscillator frequency is specified with RT = 12k and CT = 0.01 µF.
7 GND power_in Ground reference for the control circuit.
8 OUT1 output Output 1 of the output transistor, which can operate in push-pull or single-ended mode; output current Io is 500 mA per the features list, with an absolute maximum of 600 mA.
9 GNDOUT1 power_in Ground return for output 1 (output stage ground).
10 GNDOUT2 power_in Ground return for output 2 (output stage ground).
11 OUT2 output Output 2 of the output transistor, which can operate in push-pull or single-ended mode; output current Io is 500 mA per the features list, with an absolute maximum of 600 mA.
12 VCC power_in Supply pin; the absolute maximum supply voltage is 40 V and the electrical parameters are specified for VCC = 7-35 V.
13 CONOUT input Output control pin that selects push-pull or single-ended operation of the output transistors; the datasheet specifies ICONT = 3.5 mA at VIN = VREF.
14 VREF power_out Internal 5 V reference output, specified at 4.95-5.05 V with VOUT = 1 mA and short-circuit current of 25-50 mA.
15 AMPERR2- input Inverting input of error amplifier 2; input voltage is limited by the absolute maximum rating of VI = Vcc+0.3 V.
16 AMPERR2+ input Non-inverting input of error amplifier 2; input voltage is limited by the absolute maximum rating of VI = Vcc+0.3 V.

Key specifications

Parameter Value
Manufacturer HGSEMI
Package SOP-16
Category Power Management ICs
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 40 V 3
Output voltage VO 35 V 3
Output current IO 600 mA 3
Power dissipation PD 1000 mW derate 9.2 mW/°C above 25°C 3
Operating temperature TOPR -40 85 ℃ 3
Storage temperature TSTG -55 150 ℃ 3
Lead temperature (soldering) TLEAD 260 ℃ 10 s soldering 3
Quiescent current ICCQ 6 7 mA VCC=15V 4
Quiescent current ICCQ 6.3 7.3 mA VCC=35V 4
Input bias current (dead-time comparator) IBIAS -2 -10 uA VIN=0~5.25V 4
Maximum duty cycle (each output) D(MAX) 45 47 % VT4=0 4
Terminal 4 threshold voltage VTH 3 3.3 V 0 duty cycle 4
Terminal 3 threshold voltage (terminal 4 threshold at 0 duty cycle) VTH 3.9 4.2 V 0 duty cycle 4
Error amplifier input offset voltage Vio 5 8 mV VT3=2.5V 4
Error amplifier input offset current Iio 15 250 nA VT3=2.5V 4
Error amplifier input bias current Iib 0.15 1 uA VT3=2.5V 4
Error amplifier voltage gain AV 70 95 dB VOUT=3V; VOUT=0.5~3.5V 4
Common-mode input voltage range (row labelled CMRR) CMRR -0.3 dB VCC=35V 4
Error amplifier input sink current Isink 0.3 0.7 mA Vid=-15mV~-5V; VT3=0.7V 4
Error amplifier input sink current Isink -2 mA Vid=15mV~5V; VT3=3.5V 4
Collector open-circuit current ICEO 2 100 uA VCE=35V, VCC=35V 4
Emitter open-circuit current IEBO 2 -150 uA VCC=VC=35V, VE=0V 4
Fall time Tf 25 100 ns Common emitter 4
Fall time Tf 40 100 ns Common collector 4
Output control terminal current ICONT 3.5 mA VIN=VREF 4
Reference voltage VREF 4.95 5 5.05 V VOUT=1mA 5
Reference line regulation VOUT/VCC 3.6 25 mV VCC=7~35V 5
Reference load regulation VOUT/IOUT 1.5 15 mV IOUT=1~10mA 5
Reference short-circuit current Isc 25 35 50 mA Vref=0V 5
Reference voltage temperature drift 0.2 1 % TA=full temperature range 5
Oscillation frequency fosc 10 kHz CT=0.01uF, RT=12k 5
Frequency accuracy 10 % 5
Frequency voltage drift 0.2 1 % VCC=7~35V 5
Frequency temperature drift 2 % CT=0.01uF, RT=12k; TA=full temperature range 5

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: HG7500BM
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOP-16, generated on the KiCad land (body 3.9 x 9.9 mm, terminals on the pads, 1.4500000000000002 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: hg7500bm-etched.step / hg7500bm-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hg7500bm.step / hg7500bm.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HGSEMI datasheet (13 pp, sha256 2f6a03bc03ff5303, retrieved 2026-11-13, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF