3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownHG7500BM
HGSEMI · AC-DC Controllers & Regulators · SOP-16
HG7500BM from HGSEMI, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AMPERR1+ | input | Non-inverting input of error amplifier 1; input voltage is limited by the absolute maximum rating of VI = Vcc+0.3 V. |
| 2 | AMPERR1- | input | Inverting input of error amplifier 1; input voltage is limited by the absolute maximum rating of VI = Vcc+0.3 V. |
| 3 | INCPWM | input | PWM comparison input that sets the pulse-width modulation comparison point; the datasheet gives no separate limit for this pin. |
| 4 | CONTDE | input | Dead-time control input; the datasheet gives threshold voltages of 3.0-3.3 V and 3.9-4.2 V for the duty-cycle conditions in the dead-time section. |
| 5 | COSC | passive | Oscillator timing capacitor connection; the oscillator frequency is specified with CT = 0.01 µF and RT = 12k. |
| 6 | ROSC | passive | Oscillator timing resistor connection; the oscillator frequency is specified with RT = 12k and CT = 0.01 µF. |
| 7 | GND | power_in | Ground reference for the control circuit. |
| 8 | OUT1 | output | Output 1 of the output transistor, which can operate in push-pull or single-ended mode; output current Io is 500 mA per the features list, with an absolute maximum of 600 mA. |
| 9 | GNDOUT1 | power_in | Ground return for output 1 (output stage ground). |
| 10 | GNDOUT2 | power_in | Ground return for output 2 (output stage ground). |
| 11 | OUT2 | output | Output 2 of the output transistor, which can operate in push-pull or single-ended mode; output current Io is 500 mA per the features list, with an absolute maximum of 600 mA. |
| 12 | VCC | power_in | Supply pin; the absolute maximum supply voltage is 40 V and the electrical parameters are specified for VCC = 7-35 V. |
| 13 | CONOUT | input | Output control pin that selects push-pull or single-ended operation of the output transistors; the datasheet specifies ICONT = 3.5 mA at VIN = VREF. |
| 14 | VREF | power_out | Internal 5 V reference output, specified at 4.95-5.05 V with VOUT = 1 mA and short-circuit current of 25-50 mA. |
| 15 | AMPERR2- | input | Inverting input of error amplifier 2; input voltage is limited by the absolute maximum rating of VI = Vcc+0.3 V. |
| 16 | AMPERR2+ | input | Non-inverting input of error amplifier 2; input voltage is limited by the absolute maximum rating of VI = Vcc+0.3 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | SOP-16 |
| Category | Power Management ICs |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 40 | V | 3 | |||
| Output voltage | VO | 35 | V | 3 | |||
| Output current | IO | 600 | mA | 3 | |||
| Power dissipation | PD | 1000 | mW | derate 9.2 mW/°C above 25°C | 3 | ||
| Operating temperature | TOPR | -40 | 85 | ℃ | 3 | ||
| Storage temperature | TSTG | -55 | 150 | ℃ | 3 | ||
| Lead temperature (soldering) | TLEAD | 260 | ℃ | 10 s soldering | 3 | ||
| Quiescent current | ICCQ | 6 | 7 | mA | VCC=15V | 4 | |
| Quiescent current | ICCQ | 6.3 | 7.3 | mA | VCC=35V | 4 | |
| Input bias current (dead-time comparator) | IBIAS | -2 | -10 | uA | VIN=0~5.25V | 4 | |
| Maximum duty cycle (each output) | D(MAX) | 45 | 47 | % | VT4=0 | 4 | |
| Terminal 4 threshold voltage | VTH | 3 | 3.3 | V | 0 duty cycle | 4 | |
| Terminal 3 threshold voltage (terminal 4 threshold at 0 duty cycle) | VTH | 3.9 | 4.2 | V | 0 duty cycle | 4 | |
| Error amplifier input offset voltage | Vio | 5 | 8 | mV | VT3=2.5V | 4 | |
| Error amplifier input offset current | Iio | 15 | 250 | nA | VT3=2.5V | 4 | |
| Error amplifier input bias current | Iib | 0.15 | 1 | uA | VT3=2.5V | 4 | |
| Error amplifier voltage gain | AV | 70 | 95 | dB | VOUT=3V; VOUT=0.5~3.5V | 4 | |
| Common-mode input voltage range (row labelled CMRR) | CMRR | -0.3 | dB | VCC=35V | 4 | ||
| Error amplifier input sink current | Isink | 0.3 | 0.7 | mA | Vid=-15mV~-5V; VT3=0.7V | 4 | |
| Error amplifier input sink current | Isink | -2 | mA | Vid=15mV~5V; VT3=3.5V | 4 | ||
| Collector open-circuit current | ICEO | 2 | 100 | uA | VCE=35V, VCC=35V | 4 | |
| Emitter open-circuit current | IEBO | 2 | -150 | uA | VCC=VC=35V, VE=0V | 4 | |
| Fall time | Tf | 25 | 100 | ns | Common emitter | 4 | |
| Fall time | Tf | 40 | 100 | ns | Common collector | 4 | |
| Output control terminal current | ICONT | 3.5 | mA | VIN=VREF | 4 | ||
| Reference voltage | VREF | 4.95 | 5 | 5.05 | V | VOUT=1mA | 5 |
| Reference line regulation | VOUT/VCC | 3.6 | 25 | mV | VCC=7~35V | 5 | |
| Reference load regulation | VOUT/IOUT | 1.5 | 15 | mV | IOUT=1~10mA | 5 | |
| Reference short-circuit current | Isc | 25 | 35 | 50 | mA | Vref=0V | 5 |
| Reference voltage temperature drift | 0.2 | 1 | % | TA=full temperature range | 5 | ||
| Oscillation frequency | fosc | 10 | kHz | CT=0.01uF, RT=12k | 5 | ||
| Frequency accuracy | 10 | % | 5 | ||||
| Frequency voltage drift | 0.2 | 1 | % | VCC=7~35V | 5 | ||
| Frequency temperature drift | 2 | % | CT=0.01uF, RT=12k; TA=full temperature range | 5 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
HG7500BM - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOP-16, generated on the KiCad land (body 3.9 x 9.9 mm, terminals on the pads, 1.4500000000000002 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
hg7500bm-etched.step/hg7500bm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hg7500bm.step/hg7500bm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (13 pp, sha256
2f6a03bc03ff5303, retrieved 2026-11-13, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).