main
Ray
hg24c128mm: laser-etched CAD + chip hero (factory 2.0.0 backfill)
5c45a15
HG24C128MM
HGSEMI · EEPROM · MSOP-8
HG24C128MM from HGSEMI, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | input | Device address input bit 0. Hardwired to VCC or GND to set part of the 3-bit I2C device address, allowing up to 8 devices on a bus. Internally biased to a logic low if left floating (when VCC-plane coupling is <3 pF); tie to GND for coupling >3 pF. |
| 2 | A1 | input | Device address input bit 1. Hardwired to VCC or GND to set part of the 3-bit I2C device address. Internally biased to a logic low if left floating (when VCC-plane coupling is <3 pF); tie to GND for coupling >3 pF. |
| 3 | NC | unconnected | No connect. Leave unconnected. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | SDA | bidirectional | Serial data line for the two-wire (I2C) interface. Bi-directional, open-drain output requiring an external pull-up resistor; may be wire-ORed with other open-drain/open-collector devices. |
| 6 | SCL | input | Serial clock input for the two-wire (I2C) interface. Positive edge clocks data into the EEPROM and negative edge clocks data out. Supports 1 MHz at 5V and 400 kHz at 1.8/2.7/3.3V. |
| 7 | WP | input | Write protect input. Tie to GND for normal read/write; tie to VCC to inhibit all writes to the memory array (hardware data protection). Internally biased to a logic low if left floating (VCC-plane coupling <3 pF); tie to GND for coupling >3 pF. |
| 8 | VCC | power_in | Positive supply voltage input. Operating range 1.8V to 5.5V. Standby current ISB = 3 µA at 5.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | MSOP-8 |
| Category | Memory |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
HG24C128MM/TRHG24C128MMM/TRHG24C128MMN
CAD (KiCad official)
- Symbol:
HG24C128MM - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
hg24c128mm-etched.step/hg24c128mm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hg24c128mm.step/hg24c128mm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (14 pp, sha256
a9630ce0b45ca10b, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HG24C128MM
**HGSEMI** · EEPROM · MSOP-8
HG24C128MM from HGSEMI, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | input | Device address input bit 0. Hardwired to VCC or GND to set part of the 3-bit I2C device address, allowing up to 8 devices on a bus. Internally biased to a logic low if left floating (when VCC-plane coupling is <3 pF); tie to GND for coupling >3 pF. |
| 2 | A1 | input | Device address input bit 1. Hardwired to VCC or GND to set part of the 3-bit I2C device address. Internally biased to a logic low if left floating (when VCC-plane coupling is <3 pF); tie to GND for coupling >3 pF. |
| 3 | NC | unconnected | No connect. Leave unconnected. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | SDA | bidirectional | Serial data line for the two-wire (I2C) interface. Bi-directional, open-drain output requiring an external pull-up resistor; may be wire-ORed with other open-drain/open-collector devices. |
| 6 | SCL | input | Serial clock input for the two-wire (I2C) interface. Positive edge clocks data into the EEPROM and negative edge clocks data out. Supports 1 MHz at 5V and 400 kHz at 1.8/2.7/3.3V. |
| 7 | WP | input | Write protect input. Tie to GND for normal read/write; tie to VCC to inhibit all writes to the memory array (hardware data protection). Internally biased to a logic low if left floating (VCC-plane coupling <3 pF); tie to GND for coupling >3 pF. |
| 8 | VCC | power_in | Positive supply voltage input. Operating range 1.8V to 5.5V. Standby current ISB = 3 µA at 5.5V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | MSOP-8 |
| Category | Memory |
| Pins | 8 |
## Ordering variants
Same part, different packaging or reel option.
- `HG24C128MM/TR`
- `HG24C128MMM/TR`
- `HG24C128MMN`
## CAD (KiCad official)
- Symbol: `HG24C128MM`
- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`
- 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files: `hg24c128mm-etched.step` / `hg24c128mm-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hg24c128mm.step` / `hg24c128mm.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HGSEMI datasheet](docs/hg24c128mm-datasheet.pdf) (14 pp, sha256 `a9630ce0b45ca10b`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hg24c128mm-datasheet.pdf)