main
Ray
hg24c04cmm: laser-etched CAD + chip hero (factory 2.0.0 backfill)
1a499cd
HG24C04CMM
HGSEMI · EEPROM · MSOP-8
HG24C04CMM from HGSEMI, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection. Leave floating or tie to GND for best noise immunity. |
| 2 | E1 | input | Device address input bit 1. Hard-wire to VCC or GND to set the slave address bit (E1) used in the I2C device address byte. Internally pulled to GND if left floating. |
| 3 | E2 | input | Device address input bit 2. Hard-wire to VCC or GND to set the slave address bit (E2) used in the I2C device address byte. Internally pulled to GND if left floating. |
| 4 | GND | power_in | Ground reference for the power supply. Connect to system ground. |
| 5 | SDA | bidirectional | I2C serial data. Open-drain bidirectional line used to transfer address and data between master and device; requires an external pull-up resistor to VCC. |
| 6 | SCL | input | I2C serial clock input. Data on SDA is latched on the rising edge and clocked out on the falling edge of SCL. Requires an external pull-up resistor to VCC. |
| 7 | WP | input | Hardware write-protect input. When tied to VCC the entire memory array is write-protected (read-only); when tied to GND writes are enabled. Internally pulled to GND if left floating. |
| 8 | VCC | power_in | Device power supply, 1.7 V to 5.5 V. Decouple with a local bypass capacitor to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | MSOP-8 |
| Category | Memory |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
HG24C04CMMHG24C04CMM/TRHG24C04CMMMHG24C04CMMM/TRHG24C04CMMNHG24C04CMMMTHG24C04CMMMT/TRHG24C04CMMDQHG24C04CMMDQ/TRHG24C04CMMM5HG24C04CMMM5/TR
CAD (KiCad official)
- Symbol:
HG24C04CMM - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
hg24c04cmm-etched.step/hg24c04cmm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hg24c04cmm.step/hg24c04cmm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (25 pp, sha256
595b3211a0b1550b, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HG24C04CMM
**HGSEMI** · EEPROM · MSOP-8
HG24C04CMM from HGSEMI, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection. Leave floating or tie to GND for best noise immunity. |
| 2 | E1 | input | Device address input bit 1. Hard-wire to VCC or GND to set the slave address bit (E1) used in the I2C device address byte. Internally pulled to GND if left floating. |
| 3 | E2 | input | Device address input bit 2. Hard-wire to VCC or GND to set the slave address bit (E2) used in the I2C device address byte. Internally pulled to GND if left floating. |
| 4 | GND | power_in | Ground reference for the power supply. Connect to system ground. |
| 5 | SDA | bidirectional | I2C serial data. Open-drain bidirectional line used to transfer address and data between master and device; requires an external pull-up resistor to VCC. |
| 6 | SCL | input | I2C serial clock input. Data on SDA is latched on the rising edge and clocked out on the falling edge of SCL. Requires an external pull-up resistor to VCC. |
| 7 | WP | input | Hardware write-protect input. When tied to VCC the entire memory array is write-protected (read-only); when tied to GND writes are enabled. Internally pulled to GND if left floating. |
| 8 | VCC | power_in | Device power supply, 1.7 V to 5.5 V. Decouple with a local bypass capacitor to GND. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | MSOP-8 |
| Category | Memory |
| Pins | 8 |
## Ordering variants
Same part, different packaging or reel option.
- `HG24C04CMM`
- `HG24C04CMM/TR`
- `HG24C04CMMM`
- `HG24C04CMMM/TR`
- `HG24C04CMMN`
- `HG24C04CMMMT`
- `HG24C04CMMMT/TR`
- `HG24C04CMMDQ`
- `HG24C04CMMDQ/TR`
- `HG24C04CMMM5`
- `HG24C04CMMM5/TR`
## CAD (KiCad official)
- Symbol: `HG24C04CMM`
- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`
- 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files: `hg24c04cmm-etched.step` / `hg24c04cmm-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hg24c04cmm.step` / `hg24c04cmm.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HGSEMI datasheet](docs/hg24c04cmm-datasheet.pdf) (25 pp, sha256 `595b3211a0b1550b`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hg24c04cmm-datasheet.pdf)