main
Ray
hg24c02mm: laser-etched CAD + chip hero (factory 2.0.0 backfill)
fedb256
HG24C02MM
HGSEMI · EEPROM · MSOP-8
HG24C02MM from HGSEMI, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | E0 | input | Hardware slave-address bit 0. Tie to VCC or VSS to set the least-significant device-address bit; internally pulled down to VSS if left floating so a total of up to 8 devices can share the bus. |
| 2 | E1 | input | Hardware slave-address bit 1. Tie to VCC or VSS to set the middle device-address bit; internally pulled down to VSS if left floating. |
| 3 | E2 | input | Hardware slave-address bit 2. Tie to VCC or VSS to set the most-significant device-address bit; internally pulled down to VSS if left floating. |
| 4 | VSS | power_in | Ground reference for the VCC supply. |
| 5 | SDA | bidirectional | I2C serial data. Open-drain bidirectional line for serial data transfer; requires an external pull-up resistor to VCC and may be wire-OR'ed with other open-drain devices on the bus. |
| 6 | SCL | input | I2C serial clock input. Positive edge clocks data into the device; negative edge clocks data out. Supports 100 kHz, 400 kHz, and 1 MHz modes. |
| 7 | WCB | input | Write control (active-low enable). When tied to VCC, all writes to the memory array are inhibited; when tied to VSS, normal write operation is permitted. Internally pulled down to VSS if left floating. |
| 8 | VCC | power_in | Positive supply voltage, 1.7 V to 5.5 V (absolute max 6.5 V). Read ICC typ 0.2 mA @ 400 kHz; write ICC typ 0.8 mA @ 400 kHz; standby ~1 uA @ 3.3 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | MSOP-8 |
| Category | Memory |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
HG24C02MM/TRHG24C02NHG24C02M/TRHG24C02M-4K/TRHG24C02MT/TRHG24C02DQ3/TRHG24C02DQ2/TRHG24C02M5/TR
CAD (KiCad official)
- Symbol:
HG24C02MM - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
hg24c02mm-etched.step/hg24c02mm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hg24c02mm.step/hg24c02mm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (18 pp, sha256
ac9e22c1abbbd678, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HG24C02MM
**HGSEMI** · EEPROM · MSOP-8
HG24C02MM from HGSEMI, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | E0 | input | Hardware slave-address bit 0. Tie to VCC or VSS to set the least-significant device-address bit; internally pulled down to VSS if left floating so a total of up to 8 devices can share the bus. |
| 2 | E1 | input | Hardware slave-address bit 1. Tie to VCC or VSS to set the middle device-address bit; internally pulled down to VSS if left floating. |
| 3 | E2 | input | Hardware slave-address bit 2. Tie to VCC or VSS to set the most-significant device-address bit; internally pulled down to VSS if left floating. |
| 4 | VSS | power_in | Ground reference for the VCC supply. |
| 5 | SDA | bidirectional | I2C serial data. Open-drain bidirectional line for serial data transfer; requires an external pull-up resistor to VCC and may be wire-OR'ed with other open-drain devices on the bus. |
| 6 | SCL | input | I2C serial clock input. Positive edge clocks data into the device; negative edge clocks data out. Supports 100 kHz, 400 kHz, and 1 MHz modes. |
| 7 | WCB | input | Write control (active-low enable). When tied to VCC, all writes to the memory array are inhibited; when tied to VSS, normal write operation is permitted. Internally pulled down to VSS if left floating. |
| 8 | VCC | power_in | Positive supply voltage, 1.7 V to 5.5 V (absolute max 6.5 V). Read ICC typ 0.2 mA @ 400 kHz; write ICC typ 0.8 mA @ 400 kHz; standby ~1 uA @ 3.3 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | MSOP-8 |
| Category | Memory |
| Pins | 8 |
## Ordering variants
Same part, different packaging or reel option.
- `HG24C02MM/TR`
- `HG24C02N`
- `HG24C02M/TR`
- `HG24C02M-4K/TR`
- `HG24C02MT/TR`
- `HG24C02DQ3/TR`
- `HG24C02DQ2/TR`
- `HG24C02M5/TR`
## CAD (KiCad official)
- Symbol: `HG24C02MM`
- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`
- 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files: `hg24c02mm-etched.step` / `hg24c02mm-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hg24c02mm.step` / `hg24c02mm.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HGSEMI datasheet](docs/hg24c02mm-datasheet.pdf) (18 pp, sha256 `ac9e22c1abbbd678`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hg24c02mm-datasheet.pdf)