main
History Download
Ray Publish 0.1.0 637a737

HCS515-I

Microchip Tech · Pre-ordered MCUs · SOIC-14

HCS515-I from Microchip Tech, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No connection.
2 NC unconnected No connection.
3 VDD power_in Power connection; the datasheet specifies operation over 4.5V to 5.5V.
4 S1 output S1 function output with TTL levels.
5 S0 output S0 function output with TTL levels.
6 MCLR input Master clear input with Schmitt Trigger input buffer.
7 NC unconnected No connection.
8 NC unconnected No connection.
9 S_DAT bidirectional Synchronous data line to and from the host controller, TTL level.
10 S_CLK input Synchronous clock input from the host controller, TTL level.
11 RF_IN input Input from the RF receiver, TTL level.
12 GND power_in Ground connection.
13 NC unconnected No connection.
14 NC unconnected No connection.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-14
Category Single Chip Microcomputer/Microcontroller
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating temperature (Industrial, I grade) TA -40 85 °C Industrial (I) grade; Standard Operating Conditions 24
Ambient temperature under bias -40 125 °C 23
Storage temperature -65 150 °C 23
Voltage on any pin with respect to VSS (except VDD) -0.6 V Except VDD; maximum printed as VDD +0.6V 23
Voltage on VDD with respect to VSS 0 7 V 23
Maximum current into VDD pin 150 mA 23
Input clamp current IIK -20 20 mA VI < 0 or VI > VDD 23
Output clamp current IOK -20 20 mA VO < 0 or VO > VDD 23
Maximum output current sunk by any I/O pin 25 mA 23
Maximum output current sourced by any I/O pin 25 mA 23
Supply voltage VDD 4.5 5.5 V 24
VDD rise rate to ensure RESET SVDD 0.05 V/ms 24
Power-Down Current IPD 10 50 μA VDD = 4.5V 24
Input low voltage VIL 0.8 V VDD between 4.5V and 5.5V 24
Output low voltage VOL 0.6 V IOL = 8.5 mA, VDD = 4.5V 24
Transmit elemental period TE 65 660 μs 24
Output delay TOD 48 75 237 ms 24
MCLR low time TMCLR 150 ns 24
Time output valid TOV 150 222 ms 24
Command request time (valid transmission notification) TDHI 0.005 500 ms 25
Micro request acknowledge time TCLA 0.005 1 ms 25
Decoder acknowledge time TACK 4 μs 25
Start Command mode to first command bit TACT 20 1200 μs 25
Clock high time TCLKH 20 1000 μs 25
Clock low time TCLKL 20 1000 μs 25
Clock frequency FCLK 500 25000 Hz 25
Data hold time TDS 14 1000 μs 25
Command request time (command mode activation) TREQ 0.005 500 ms 25
Microcontroller request acknowledge time TRESP 1 ms 25
Decoder acknowledge time (command mode) TACK 4 μs 25
Start Command mode to first command bit (command mode) TSTART 20 1000 μs 25
Clock high time (command mode) TCLKH 20 1000 μs 25
Clock low time (command mode) TCLKL 20 1000 μs 25
Clock frequency (command mode) FCLK 500 25000 Hz 25
Data hold time (command mode) TDS 14 μs 25
Command validate time TCMD 10 μs 25
Address validate time TADDR 10 μs 25
Data validate time TDATA 10 μs 25
Decoder EEPROM read time TRD 1000 2000 μs 25
Write command activation time TWR 20 1000 μs 26
EEPROM write acknowledge time TACK 10 ms 26
Microcontroller acknowledge response time (write) TRESP 20 1000 μs 26
Decoder response acknowledge time (write) TACK2 10 μs 26
Learn command activation time (erase all) TERA 20 1000 μs 26
Decoder acknowledge time (erase all) TACK 20 210 ms 26
Microcontroller acknowledge response time (erase all) TRESP 20 1000 μs 26
Decoder data line low (erase all) TACK2 10 μs 26
Learn command activation time (micro mode) TLRN 20 1000 μs 26
Decoder acknowledge time (micro mode learn) TACK 20 μs 26
Microcontroller acknowledge response time (micro mode learn) TRESP 20 1000 μs 26
Decoder data line low (micro mode learn) TACK2 10 μs 26
Command request time (stand-alone learn) TREQ 100 ms 26
Learn command activation time (stand-alone) TLRN 2 s 26
Erase-all command activation time (stand-alone) TERA 6 s 26
Command request time (learn status string) TDHI 500 ms 27
Microcontroller command request time (learn status string) TCLA 0.005 500 ms 27
Clock low hold time (learn status string) TCLL 0.02 1.2 ms 27

CAD (KiCad official)

  • Symbol: HCS515-I
  • Footprint: Package_SO:SOIC-14_3.9x8.7mm_P1.27mm
  • 3D model: SOIC-14 (KiCad packages3D, STEP)
  • 3D model files: hcs515-i-etched.step / hcs515-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hcs515-i.step / hcs515-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (38 pp, sha256 1a55cf3f08b4ca76, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF