Generated by kicad-footprint-generator · KiCad file format 20260206
HCS515-I
Microchip Tech · Pre-ordered MCUs · SOIC-14
HCS515-I from Microchip Tech, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connection. |
| 2 | NC | unconnected | No connection. |
| 3 | VDD | power_in | Power connection; the datasheet specifies operation over 4.5V to 5.5V. |
| 4 | S1 | output | S1 function output with TTL levels. |
| 5 | S0 | output | S0 function output with TTL levels. |
| 6 | MCLR | input | Master clear input with Schmitt Trigger input buffer. |
| 7 | NC | unconnected | No connection. |
| 8 | NC | unconnected | No connection. |
| 9 | S_DAT | bidirectional | Synchronous data line to and from the host controller, TTL level. |
| 10 | S_CLK | input | Synchronous clock input from the host controller, TTL level. |
| 11 | RF_IN | input | Input from the RF receiver, TTL level. |
| 12 | GND | power_in | Ground connection. |
| 13 | NC | unconnected | No connection. |
| 14 | NC | unconnected | No connection. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-14 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating temperature (Industrial, I grade) | TA | -40 | 85 | °C | Industrial (I) grade; Standard Operating Conditions | 24 | |
| Ambient temperature under bias | -40 | 125 | °C | 23 | |||
| Storage temperature | -65 | 150 | °C | 23 | |||
| Voltage on any pin with respect to VSS (except VDD) | -0.6 | V | Except VDD; maximum printed as VDD +0.6V | 23 | |||
| Voltage on VDD with respect to VSS | 0 | 7 | V | 23 | |||
| Maximum current into VDD pin | 150 | mA | 23 | ||||
| Input clamp current | IIK | -20 | 20 | mA | VI < 0 or VI > VDD | 23 | |
| Output clamp current | IOK | -20 | 20 | mA | VO < 0 or VO > VDD | 23 | |
| Maximum output current sunk by any I/O pin | 25 | mA | 23 | ||||
| Maximum output current sourced by any I/O pin | 25 | mA | 23 | ||||
| Supply voltage | VDD | 4.5 | 5.5 | V | 24 | ||
| VDD rise rate to ensure RESET | SVDD | 0.05 | V/ms | 24 | |||
| Power-Down Current | IPD | 10 | 50 | μA | VDD = 4.5V | 24 | |
| Input low voltage | VIL | 0.8 | V | VDD between 4.5V and 5.5V | 24 | ||
| Output low voltage | VOL | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V | 24 | ||
| Transmit elemental period | TE | 65 | 660 | μs | 24 | ||
| Output delay | TOD | 48 | 75 | 237 | ms | 24 | |
| MCLR low time | TMCLR | 150 | ns | 24 | |||
| Time output valid | TOV | 150 | 222 | ms | 24 | ||
| Command request time (valid transmission notification) | TDHI | 0.005 | 500 | ms | 25 | ||
| Micro request acknowledge time | TCLA | 0.005 | 1 | ms | 25 | ||
| Decoder acknowledge time | TACK | 4 | μs | 25 | |||
| Start Command mode to first command bit | TACT | 20 | 1200 | μs | 25 | ||
| Clock high time | TCLKH | 20 | 1000 | μs | 25 | ||
| Clock low time | TCLKL | 20 | 1000 | μs | 25 | ||
| Clock frequency | FCLK | 500 | 25000 | Hz | 25 | ||
| Data hold time | TDS | 14 | 1000 | μs | 25 | ||
| Command request time (command mode activation) | TREQ | 0.005 | 500 | ms | 25 | ||
| Microcontroller request acknowledge time | TRESP | 1 | ms | 25 | |||
| Decoder acknowledge time (command mode) | TACK | 4 | μs | 25 | |||
| Start Command mode to first command bit (command mode) | TSTART | 20 | 1000 | μs | 25 | ||
| Clock high time (command mode) | TCLKH | 20 | 1000 | μs | 25 | ||
| Clock low time (command mode) | TCLKL | 20 | 1000 | μs | 25 | ||
| Clock frequency (command mode) | FCLK | 500 | 25000 | Hz | 25 | ||
| Data hold time (command mode) | TDS | 14 | μs | 25 | |||
| Command validate time | TCMD | 10 | μs | 25 | |||
| Address validate time | TADDR | 10 | μs | 25 | |||
| Data validate time | TDATA | 10 | μs | 25 | |||
| Decoder EEPROM read time | TRD | 1000 | 2000 | μs | 25 | ||
| Write command activation time | TWR | 20 | 1000 | μs | 26 | ||
| EEPROM write acknowledge time | TACK | 10 | ms | 26 | |||
| Microcontroller acknowledge response time (write) | TRESP | 20 | 1000 | μs | 26 | ||
| Decoder response acknowledge time (write) | TACK2 | 10 | μs | 26 | |||
| Learn command activation time (erase all) | TERA | 20 | 1000 | μs | 26 | ||
| Decoder acknowledge time (erase all) | TACK | 20 | 210 | ms | 26 | ||
| Microcontroller acknowledge response time (erase all) | TRESP | 20 | 1000 | μs | 26 | ||
| Decoder data line low (erase all) | TACK2 | 10 | μs | 26 | |||
| Learn command activation time (micro mode) | TLRN | 20 | 1000 | μs | 26 | ||
| Decoder acknowledge time (micro mode learn) | TACK | 20 | μs | 26 | |||
| Microcontroller acknowledge response time (micro mode learn) | TRESP | 20 | 1000 | μs | 26 | ||
| Decoder data line low (micro mode learn) | TACK2 | 10 | μs | 26 | |||
| Command request time (stand-alone learn) | TREQ | 100 | ms | 26 | |||
| Learn command activation time (stand-alone) | TLRN | 2 | s | 26 | |||
| Erase-all command activation time (stand-alone) | TERA | 6 | s | 26 | |||
| Command request time (learn status string) | TDHI | 500 | ms | 27 | |||
| Microcontroller command request time (learn status string) | TCLA | 0.005 | 500 | ms | 27 | ||
| Clock low hold time (learn status string) | TCLL | 0.02 | 1.2 | ms | 27 |
CAD (KiCad official)
- Symbol:
HCS515-I - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files:
hcs515-i-etched.step/hcs515-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hcs515-i.step/hcs515-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (38 pp, sha256
1a55cf3f08b4ca76, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).