main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers hcpl-7721-c1h0: viewers rendered from the public page · Ray
hcpl-7721-c1h0-etched.glb Publish 0.1.0 · Ray
hcpl-7721-c1h0-etched.step hcpl-7721-c1h0: factory component page (tier=lcsc) · Ray
hcpl-7721-c1h0-hero.glb hcpl-7721-c1h0: hero GLB from the etched model (keeps the MPN mark) · Ray
hcpl-7721-c1h0-hero.overlay.json Publish 0.1.0 · Ray
hcpl-7721-c1h0.glb Publish 0.1.0 · Ray
hcpl-7721-c1h0.kicad_mod Publish 0.1.0 · Ray
hcpl-7721-c1h0.kicad_sym Publish 0.1.0 · Ray
hcpl-7721-c1h0.lbr Publish 0.1.0 · Ray
hcpl-7721-c1h0.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 8 pins · Ray

HCPL-7721-C1H0

KTP · Logic Output Optoisolators · DIP-8

HCPL-7721-C1H0 from KTP, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD1 power_in Input-side supply, recommended 4.5 V to 5.5 V with an absolute maximum of 6.0 V, bypassed to pin 4 by a 0.01 µF to 0.1 µF capacitor placed as close as possible to the pins.
2 VI input CMOS logic input that turns the LED on when low and off when high, with VIH of 2.0 V minimum to VDD1 and VIL of 0.0 V to 0.8 V, and input rise/fall time up to 1.0 ms.
3 LED1 unconnected Internal LED anode that must be left unconnected to guarantee the datasheet performance.
4 GND1 power_in Input-side ground, bypassed to pin 1 by a 0.01 µF to 0.1 µF capacitor placed as close as possible to the pins.
5 GND2 power_in Output-side ground, bypassed to pin 8 by a 0.01 µF to 0.1 µF capacitor placed as close as possible to the pins.
6 VO output CMOS logic output with VOH of 4.0 V minimum and VOL of 0.1 V maximum at light loads, absolute range -0.5 V to VDD2+0.5 V, and average output current limited to 10 mA.
7 NC unconnected Not internally connected.
8 VDD2 power_in Output-side supply, recommended 4.5 V to 5.5 V with an absolute maximum of 6.0 V, bypassed to pin 5 by a 0.01 µF to 0.1 µF capacitor placed as close as possible to the pins.

Key specifications

Parameter Value
Manufacturer KTP
Package DIP-8
Category Optoisolators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage temperature TS -55 125 ℃ 3
Operating temperature TA -40 85 ℃ 3
Supply voltage VDD1,VDD2 0 6 V 3
Input voltage VI -0.5 V max printed as VDD1+0.5 3
Output voltage VO -0.5 V max printed as VDD2+0.5 3
Average output current IO 10 mA 3
Lead solder temperature 260 °C for 10 sec. 3
Operating temperature TA -40 85 ℃ 3
Supply voltage VDD1,VDD2 4.5 5.5 V 3
Logic high input voltage VIH 2 V max printed as VDD1 3
Logic low input voltage VIL 0 0.8 V 3
Input signal rise and fall time tir,tif 1 ms 3
Logic low input supply current IDD1L 9 13 mA VI=0V 4
Logic high input supply current IDD1H 1.5 3 mA VI=VDD1 4
Output supply current (logic low) IDD2L 4 6 mA 4
Output supply current (logic high) IDD2H 3.8 7 mA 4
Input current II -10 10 uA 4
Logic high output voltage VOH 4.4 5 V IO=-20uA, VI=VIH 4
Logic high output voltage VOH 4 4.8 V IO=-4mA, VI=VIH 4
Logic low output voltage VOL 0 0.1 V IO=20uA, VI=VIL 4
Logic low output voltage VOL 0.1 V IO=400uA, VI=VIL 4
Logic low output voltage VOL 0.5 1 V IO=4mA, VI=VIL 4
Logic low output propagation delay tPHL 20 40 ns 4
Logic high output propagation delay tPLH 19 40 ns 4
Pulse width PW 40 ns 4
Data rate 25 MBd 4
Pulse width distortion /tPHL-tPLH/ PWD 3 6 ns 4
Propagation delay skew tPSK 20 ns 4
Output rise time (10%~90%) tR 9 ns CL=15pF, CMOS signal levels 4
Output fall time (90%~10%) tF 8 ns CL=15pF, CMOS signal levels 4
Logic high output common mode transient immunity /CMH/ 10 20 kV/μs VI=VDD1, VCM=1000V, VO>0.8VDD1 4
Logic low output common mode transient immunity /CML/ 10 20 kV/μs VI=0V, VCM=1000V, VO<0.8 4
Input dynamic power dissipation capacitance CPD1 60 pF 4
Output dynamic power dissipation capacitance CPD2 10 pF 4
Input-output momentary withstand voltage VISO 5000 VRMS RH≤50%, t=1min, TA=25℃ 5
Input-output resistance RI-O 1012 Ω VI-O=500Vdc 5
Input-output capacitance CI-O 0.6 pF f=1MHz 5

CAD (KiCad official)

  • Symbol: HCPL-7721-C1H0
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: DIP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 3.65 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: hcpl-7721-c1h0-etched.step / hcpl-7721-c1h0-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hcpl-7721-c1h0.step / hcpl-7721-c1h0.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: KTP datasheet (7 pp, sha256 5a5256d59f197f6f, retrieved 2026-11-12, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF