3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHCPL-7721-C1H0
KTP · Logic Output Optoisolators · DIP-8
HCPL-7721-C1H0 from KTP, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD1 | power_in | Input-side supply, recommended 4.5 V to 5.5 V with an absolute maximum of 6.0 V, bypassed to pin 4 by a 0.01 µF to 0.1 µF capacitor placed as close as possible to the pins. |
| 2 | VI | input | CMOS logic input that turns the LED on when low and off when high, with VIH of 2.0 V minimum to VDD1 and VIL of 0.0 V to 0.8 V, and input rise/fall time up to 1.0 ms. |
| 3 | LED1 | unconnected | Internal LED anode that must be left unconnected to guarantee the datasheet performance. |
| 4 | GND1 | power_in | Input-side ground, bypassed to pin 1 by a 0.01 µF to 0.1 µF capacitor placed as close as possible to the pins. |
| 5 | GND2 | power_in | Output-side ground, bypassed to pin 8 by a 0.01 µF to 0.1 µF capacitor placed as close as possible to the pins. |
| 6 | VO | output | CMOS logic output with VOH of 4.0 V minimum and VOL of 0.1 V maximum at light loads, absolute range -0.5 V to VDD2+0.5 V, and average output current limited to 10 mA. |
| 7 | NC | unconnected | Not internally connected. |
| 8 | VDD2 | power_in | Output-side supply, recommended 4.5 V to 5.5 V with an absolute maximum of 6.0 V, bypassed to pin 5 by a 0.01 µF to 0.1 µF capacitor placed as close as possible to the pins. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | KTP |
| Package | DIP-8 |
| Category | Optoisolators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage temperature | TS | -55 | 125 | ℃ | 3 | ||
| Operating temperature | TA | -40 | 85 | ℃ | 3 | ||
| Supply voltage | VDD1,VDD2 | 0 | 6 | V | 3 | ||
| Input voltage | VI | -0.5 | V | max printed as VDD1+0.5 | 3 | ||
| Output voltage | VO | -0.5 | V | max printed as VDD2+0.5 | 3 | ||
| Average output current | IO | 10 | mA | 3 | |||
| Lead solder temperature | 260 | °C | for 10 sec. | 3 | |||
| Operating temperature | TA | -40 | 85 | ℃ | 3 | ||
| Supply voltage | VDD1,VDD2 | 4.5 | 5.5 | V | 3 | ||
| Logic high input voltage | VIH | 2 | V | max printed as VDD1 | 3 | ||
| Logic low input voltage | VIL | 0 | 0.8 | V | 3 | ||
| Input signal rise and fall time | tir,tif | 1 | ms | 3 | |||
| Logic low input supply current | IDD1L | 9 | 13 | mA | VI=0V | 4 | |
| Logic high input supply current | IDD1H | 1.5 | 3 | mA | VI=VDD1 | 4 | |
| Output supply current (logic low) | IDD2L | 4 | 6 | mA | 4 | ||
| Output supply current (logic high) | IDD2H | 3.8 | 7 | mA | 4 | ||
| Input current | II | -10 | 10 | uA | 4 | ||
| Logic high output voltage | VOH | 4.4 | 5 | V | IO=-20uA, VI=VIH | 4 | |
| Logic high output voltage | VOH | 4 | 4.8 | V | IO=-4mA, VI=VIH | 4 | |
| Logic low output voltage | VOL | 0 | 0.1 | V | IO=20uA, VI=VIL | 4 | |
| Logic low output voltage | VOL | 0.1 | V | IO=400uA, VI=VIL | 4 | ||
| Logic low output voltage | VOL | 0.5 | 1 | V | IO=4mA, VI=VIL | 4 | |
| Logic low output propagation delay | tPHL | 20 | 40 | ns | 4 | ||
| Logic high output propagation delay | tPLH | 19 | 40 | ns | 4 | ||
| Pulse width | PW | 40 | ns | 4 | |||
| Data rate | 25 | MBd | 4 | ||||
| Pulse width distortion /tPHL-tPLH/ | PWD | 3 | 6 | ns | 4 | ||
| Propagation delay skew | tPSK | 20 | ns | 4 | |||
| Output rise time (10%~90%) | tR | 9 | ns | CL=15pF, CMOS signal levels | 4 | ||
| Output fall time (90%~10%) | tF | 8 | ns | CL=15pF, CMOS signal levels | 4 | ||
| Logic high output common mode transient immunity | /CMH/ | 10 | 20 | kV/μs | VI=VDD1, VCM=1000V, VO>0.8VDD1 | 4 | |
| Logic low output common mode transient immunity | /CML/ | 10 | 20 | kV/μs | VI=0V, VCM=1000V, VO<0.8 | 4 | |
| Input dynamic power dissipation capacitance | CPD1 | 60 | pF | 4 | |||
| Output dynamic power dissipation capacitance | CPD2 | 10 | pF | 4 | |||
| Input-output momentary withstand voltage | VISO | 5000 | VRMS | RH≤50%, t=1min, TA=25℃ | 5 | ||
| Input-output resistance | RI-O | 1012 | Ω | VI-O=500Vdc | 5 | ||
| Input-output capacitance | CI-O | 0.6 | pF | f=1MHz | 5 |
CAD (KiCad official)
- Symbol:
HCPL-7721-C1H0 - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: DIP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 3.65 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
hcpl-7721-c1h0-etched.step/hcpl-7721-c1h0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hcpl-7721-c1h0.step/hcpl-7721-c1h0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: KTP datasheet (7 pp, sha256
5a5256d59f197f6f, retrieved 2026-11-12, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).