main
Ray hcpl-2631-520e: CAD wording names the Adom_Gen land, not KiCad official d36e29d

HCPL-2631-520E

Broadcom Limited · Logic Output Optocoupler · DIP-8

HCPL-2631-520E from Broadcom Limited, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 ANODE1 passive Anode of channel 1 input LED (dual-channel HCPL-2631 schematic).
2 CATHODE1 passive Cathode of channel 1 input LED (dual-channel HCPL-2631 schematic).
3 CATHODE2 passive Cathode of channel 2 input LED (dual-channel HCPL-2631 schematic).
4 ANODE2 passive Anode of channel 2 input LED (dual-channel HCPL-2631 schematic).
5 GND power_in Ground for the output side; a 0.1 µF bypass capacitor between pins 5 and 8 is recommended, placed as close as possible.
6 VO2 output Open-collector Schottky-clamped output of channel 2.
7 VO1 output Open-collector Schottky-clamped output of channel 1.
8 VCC power_in Supply voltage for the detector ICs; a 0.1 µF bypass capacitor between pins 8 and 5 is recommended, placed as close as possible.

Key specifications

Parameter Value
Manufacturer Broadcom Limited
Package DIP-8
Category Optocoupler
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power Supply Voltage VCC 4.5 5.5 V 15
Operating Temperature TA -40 85 °C 15
Input Current, Low Level IFL 0 250 µA 15
Input Current, High Level IFH 5 15 mA Each channel 15
Fan Out N 5 TTL Loads RL = 1 k 15
Output Pull-up Resistor RL 330 4 Ω (min) / kΩ (max), as printed 15
Storage Temperature TS -55 125 °C 14
Operating Temperature TA -40 85 °C 14
Average Forward Input Current IF 15 mA Dual 8-Pin DIP; each channel 14
Reverse Input Voltage VR 5 V 8-Pin DIP, SO-8; each channel 14
Input Power Dissipation PI 27 mW Dual 8-Pin DIP 14
Supply Voltage (1 Minute Maximum) VCC 7 V 1 minute maximum 14
Output Collector Current IO 50 mA each channel 14
Output Collector Voltage VO 7 V each channel 14
Output Collector Power Dissipation PO 60 mW Dual 8-Pin DIP; each channel 14
Lead Solder Temperature (Through Hole Parts) TLS 260 °C 8-Pin DIP: 10 s, 1.6 mm below seating plane 14
Input Forward Voltage VF 1.4 1.5 1.75 V TA = 25°C, IF = 10 mA 16
Input Reverse Breakdown Voltage BVR 5 V IR = 10 µA 17
High Level Output Current IOH 5.5 100 µA VCC = 5.5V, VE = 2.0V; VO = 5.5V, IF = 250 μA 16
Low Level Output Voltage VOL 0.35 0.6 V VCC = 5.5V, VE = 2.0V, IF = 5 mA, IOL (Sinking) = 13 mA 16
High Level Supply Current ICCH 10 15 mA Both Channels 16
Low Level Supply Current ICCL 13 21 mA Both Channels 16
Logic High Common Mode Transient Immunity /CMH/ 10000 15000 V/µs /VCM/ = 1 kV 19
Logic Low Common Mode Transient Immunity /CML/ 10000 15000 V/µs /VCM/ = 1 kV 19
Input-Output Momentary Withstand Voltage VISO 3750 Vrms RH 50%, t = 1 min, TA = 25°C 20
Pulse Width Distortion /tPHL, tPLH/ 3.5 35 ns RL = 350, CL = 15 pF 18
Propagation Delay Time to High Output Level tPLH 20 48 75 ns TA = 25°C, RL = 350, CL = 15 pF 18
Propagation Delay Time to Low Output Level tPHL 25 50 75 ns TA = 25°C, RL = 350, CL = 15 pF 18
Propagation Delay Skew tPSK 40 ns RL = 350, CL = 15 pF 18
Input Diode Temperature Coefficient VF/TA -1.6 mV/°C IF = 10 mA 17
Input Capacitance CIN 60 pF f = 1 MHz, VF = 0V 17
Input Threshold Current (Dual Channel) ITH 2.5 mA VCC = 5.5V, VE = 2.0V, VO = 0.6V, IOL (Sinking) = 13 mA 16
Output Rise Time (10-90%) tr 24 ns RL = 350, CL = 15 pF 18
Output Fall Time (90-10%) tf 10 ns RL = 350, CL = 15 pF 18
Input-Output Capacitance CI-O 0.6 pF f = 1 MHz, TA = 25°C 20
Input-Input Insulation Leakage Current II-I 0.005 µA RH 45%, t = 5s, VI-I = 500V 20
Capacitance (Input-Input) CI-I 0.03 pF f = 1 MHz 20

CAD (Adom-generated)

  • Symbol: HCPL-2631-520E
  • Footprint: Adom_Gen:Broadcom_Limited_HCPL-263_39c9e6
  • 3D model: generated to fit the land (STEP)
  • 3D model files: hcpl-2631-520e-etched.step / hcpl-2631-520e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hcpl-2631-520e.step / hcpl-2631-520e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Broadcom Limited datasheet (30 pp, sha256 ab7ab8c3280c92c4, retrieved 2026-10-31, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.

Datasheet PDF