3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHCPL-2631-520E
Broadcom Limited · Logic Output Optocoupler · DIP-8
HCPL-2631-520E from Broadcom Limited, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ANODE1 | passive | Anode of channel 1 input LED (dual-channel HCPL-2631 schematic). |
| 2 | CATHODE1 | passive | Cathode of channel 1 input LED (dual-channel HCPL-2631 schematic). |
| 3 | CATHODE2 | passive | Cathode of channel 2 input LED (dual-channel HCPL-2631 schematic). |
| 4 | ANODE2 | passive | Anode of channel 2 input LED (dual-channel HCPL-2631 schematic). |
| 5 | GND | power_in | Ground for the output side; a 0.1 µF bypass capacitor between pins 5 and 8 is recommended, placed as close as possible. |
| 6 | VO2 | output | Open-collector Schottky-clamped output of channel 2. |
| 7 | VO1 | output | Open-collector Schottky-clamped output of channel 1. |
| 8 | VCC | power_in | Supply voltage for the detector ICs; a 0.1 µF bypass capacitor between pins 8 and 5 is recommended, placed as close as possible. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Broadcom Limited |
| Package | DIP-8 |
| Category | Optocoupler |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply Voltage | VCC | 4.5 | 5.5 | V | 15 | ||
| Operating Temperature | TA | -40 | 85 | °C | 15 | ||
| Input Current, Low Level | IFL | 0 | 250 | µA | 15 | ||
| Input Current, High Level | IFH | 5 | 15 | mA | Each channel | 15 | |
| Fan Out | N | 5 | TTL Loads | RL = 1 k | 15 | ||
| Output Pull-up Resistor | RL | 330 | 4 | Ω (min) / kΩ (max), as printed | 15 | ||
| Storage Temperature | TS | -55 | 125 | °C | 14 | ||
| Operating Temperature | TA | -40 | 85 | °C | 14 | ||
| Average Forward Input Current | IF | 15 | mA | Dual 8-Pin DIP; each channel | 14 | ||
| Reverse Input Voltage | VR | 5 | V | 8-Pin DIP, SO-8; each channel | 14 | ||
| Input Power Dissipation | PI | 27 | mW | Dual 8-Pin DIP | 14 | ||
| Supply Voltage (1 Minute Maximum) | VCC | 7 | V | 1 minute maximum | 14 | ||
| Output Collector Current | IO | 50 | mA | each channel | 14 | ||
| Output Collector Voltage | VO | 7 | V | each channel | 14 | ||
| Output Collector Power Dissipation | PO | 60 | mW | Dual 8-Pin DIP; each channel | 14 | ||
| Lead Solder Temperature (Through Hole Parts) | TLS | 260 | °C | 8-Pin DIP: 10 s, 1.6 mm below seating plane | 14 | ||
| Input Forward Voltage | VF | 1.4 | 1.5 | 1.75 | V | TA = 25°C, IF = 10 mA | 16 |
| Input Reverse Breakdown Voltage | BVR | 5 | V | IR = 10 µA | 17 | ||
| High Level Output Current | IOH | 5.5 | 100 | µA | VCC = 5.5V, VE = 2.0V; VO = 5.5V, IF = 250 μA | 16 | |
| Low Level Output Voltage | VOL | 0.35 | 0.6 | V | VCC = 5.5V, VE = 2.0V, IF = 5 mA, IOL (Sinking) = 13 mA | 16 | |
| High Level Supply Current | ICCH | 10 | 15 | mA | Both Channels | 16 | |
| Low Level Supply Current | ICCL | 13 | 21 | mA | Both Channels | 16 | |
| Logic High Common Mode Transient Immunity | /CMH/ | 10000 | 15000 | V/µs | /VCM/ = 1 kV | 19 | |
| Logic Low Common Mode Transient Immunity | /CML/ | 10000 | 15000 | V/µs | /VCM/ = 1 kV | 19 | |
| Input-Output Momentary Withstand Voltage | VISO | 3750 | Vrms | RH 50%, t = 1 min, TA = 25°C | 20 | ||
| Pulse Width Distortion | /tPHL, tPLH/ | 3.5 | 35 | ns | RL = 350, CL = 15 pF | 18 | |
| Propagation Delay Time to High Output Level | tPLH | 20 | 48 | 75 | ns | TA = 25°C, RL = 350, CL = 15 pF | 18 |
| Propagation Delay Time to Low Output Level | tPHL | 25 | 50 | 75 | ns | TA = 25°C, RL = 350, CL = 15 pF | 18 |
| Propagation Delay Skew | tPSK | 40 | ns | RL = 350, CL = 15 pF | 18 | ||
| Input Diode Temperature Coefficient | VF/TA | -1.6 | mV/°C | IF = 10 mA | 17 | ||
| Input Capacitance | CIN | 60 | pF | f = 1 MHz, VF = 0V | 17 | ||
| Input Threshold Current (Dual Channel) | ITH | 2.5 | mA | VCC = 5.5V, VE = 2.0V, VO = 0.6V, IOL (Sinking) = 13 mA | 16 | ||
| Output Rise Time (10-90%) | tr | 24 | ns | RL = 350, CL = 15 pF | 18 | ||
| Output Fall Time (90-10%) | tf | 10 | ns | RL = 350, CL = 15 pF | 18 | ||
| Input-Output Capacitance | CI-O | 0.6 | pF | f = 1 MHz, TA = 25°C | 20 | ||
| Input-Input Insulation Leakage Current | II-I | 0.005 | µA | RH 45%, t = 5s, VI-I = 500V | 20 | ||
| Capacitance (Input-Input) | CI-I | 0.03 | pF | f = 1 MHz | 20 |
CAD (Adom-generated)
- Symbol:
HCPL-2631-520E - Footprint:
Adom_Gen:Broadcom_Limited_HCPL-263_39c9e6 - 3D model: generated to fit the land (STEP)
- 3D model files:
hcpl-2631-520e-etched.step/hcpl-2631-520e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hcpl-2631-520e.step/hcpl-2631-520e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Broadcom Limited datasheet (30 pp, sha256
ab7ab8c3280c92c4, retrieved 2026-10-31, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.