main
History Download
Ray Publish 0.1.0 8388b4e

HCPL-2232

Broadcom Limited · Logic Output Optoisolators · DIP-8

HCPL-2232 from Broadcom Limited, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ANODE 1 passive Anode of the channel 1 input LED, driven with IF(ON) of 1.8 mA to 5 mA for HCPL-223X.
2 CATHODE 1 passive Cathode of the channel 1 input LED; the LED is on for a logic-high VO1 and the VF(OFF) maximum is 0.8 V.
3 CATHODE 2 passive Cathode of the channel 2 input LED; the LED is on for a logic-high VO2 and the VF(OFF) maximum is 0.8 V.
4 ANODE 2 passive Anode of the channel 2 input LED, driven with IF(ON) of 1.8 mA to 5 mA for HCPL-223X.
5 GND power_in Output-side ground, with a 0.1 µF bypass capacitor required between pins 5 and 8.
6 VO2 output Channel 2 totem-pole output (no pull-up needed), high when LED 2 is on, IOL up to 6.4 mA at VOL max 0.5 V, average output current max 25 mA.
7 VO1 output Channel 1 totem-pole output (no pull-up needed), high when LED 1 is on, IOL up to 6.4 mA at VOL max 0.5 V, average output current max 25 mA.
8 VCC power_in Output-side supply voltage of 4.5 V to 20 V recommended (0 V to 20 V absolute maximum), bypassed with 0.1 µF to pin 5.

Key specifications

Parameter Value
Manufacturer Broadcom Limited
Package DIP-8
Category Optoisolators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage Temperature TS -55 125 °C 11
Operating Temperature TA -40 85 °C 11
Average Forward Input Current IF(AVG) 10 mA Each channel 11
Peak Transient Input Current IF(TRAN) 1 A ≤1 µs pulse width, 300 pps; each channel 11
Reverse Input Voltage VR 5 V Each channel 11
Average Output Current IO 25 mA Each channel 11
Supply Voltage VCC 0 20 V 11
Output Voltage VO -0.5 20 V Each channel 11
Total Package Power Dissipation PT 294 mW HCPL-223X; derate linearly above 70°C at 4.5 mW/°C 11
Lead Solder Temperature 260 °C 10 s, 1.6 mm below seating plane (through hole) 11
Power Supply Voltage VCC 4.5 20 V 11
Forward Input Current (ON) IF(ON) 1.8 5 mA HCPL-223X 11
Forward Input Voltage (OFF) VF(OFF) 0.8 V 11
Operating Temperature TA -40 85 °C 11
Junction Temperature TJ -40 125 °C 11
Fan Out N 4 TTL Loads 11
Logic Low Output Voltage VOL 0.5 V IOL = 6.4 mA (4 TTL Loads) 12
Logic High Output Voltage VOH 2.4 V IOH = -2.6 mA 12
Logic High Output Voltage VOH 2.7 V IOH = -0.4 mA 12
Output Leakage Current IOHH 100 µA VO = 5.5V; IF = 5 mA 12
Output Leakage Current IOHH 500 µA VO = 20V; IF = 5 mA 12
Logic Low Supply Current ICCL 7.4 12 mA HCPL-223X; VCC = 5.5V; VF = 0V, IO = Open 12
Logic Low Supply Current ICCL 8.6 14 mA HCPL-223X; VCC = 20V; VF = 0V, IO = Open 12
Logic High Supply Current ICCH 4.8 8 mA HCPL-223X; VCC = 5.5V; IF = 5 mA, IO = Open 12
Logic High Supply Current ICCH 5.4 10 mA HCPL-223X; VCC = 20V; IF = 5 mA, IO = Open 12
Logic Low Short Circuit Output Current IOSL 15 mA VO = VCC = 5.5V; VF = 0V 12
Logic Low Short Circuit Output Current IOSL 20 mA VO = VCC = 20V; VF = 0V 12
Logic High Short Circuit Output Current IOSH -10 mA VCC = 5.5V; VO = GND; IF = 5 mA 12
Logic High Short Circuit Output Current IOSH -20 mA VCC = 20V; VO = GND; IF = 5 mA 12
Input Forward Voltage VF 1.5 1.7 V TA = 25°C; IF = 5 mA 12
Input Forward Voltage VF 1.85 V IF = 5 mA 12
Input Reverse Breakdown Voltage BVR 5 V IR = 10 µA 12
Input Diode Temperature Coefficient ΔVF/ΔTA -1.7 mV/°C IF = 5 mA 12
Input Capacitance CIN 60 pF f = 1 MHz, VF = 0V 12
Propagation Delay Time to Logic Low Output Level tPHL 150 300 ns With Peaking Capacitor 13
Propagation Delay Time to Logic Low Output Level tPHL 150 ns Without Peaking Capacitor 13
Propagation Delay Time to Logic High Output Level tPLH 90 300 ns With Peaking Capacitor 13
Propagation Delay Time to Logic High Output Level tPLH 110 ns Without Peaking Capacitor 13
Output Rise Time (10% to 90%) tr 30 ns 13
Output Fall Time (90% to 10%) tf 7 ns 13
Logic High Common Mode Transient Immunity /CMH/ 10000 V/µs /VCM/ = 1 kV, IF = 5.0 mA, VCC = 5V, TA = 25°C 13
Logic Low Common Mode Transient Immunity /CML/ 10000 V/µs /VCM/ = 1 kV, VF = 0V, VCC = 5V, TA = 25°C 13
Input-Output Momentary Withstand Voltage VISO 3750 Vrms RH < 50%, t = 1 min. 14
Input-Output Capacitance CI-O 0.6 pF f = 1 MHz 14
Input-Input Insulation Leakage Current II-I 0.005 µA Relative Humidity = 45%, t = 5s, VI-I = 500V 14
Capacitance (Input-Input) CI-I 0.25 pF f = 1 MHz 14

CAD (KiCad official)

  • Symbol: HCPL-2232
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: DIP-8 (KiCad packages3D, STEP)
  • 3D model files: hcpl-2232-etched.step / hcpl-2232-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hcpl-2232.step / hcpl-2232.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Broadcom Limited datasheet (22 pp, sha256 ec95d613662edad2, retrieved 2026-11-02, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF