Generated by kicad-footprint-generator · KiCad file format 20260206
HCPL-2232
Broadcom Limited · Logic Output Optoisolators · DIP-8
HCPL-2232 from Broadcom Limited, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ANODE 1 | passive | Anode of the channel 1 input LED, driven with IF(ON) of 1.8 mA to 5 mA for HCPL-223X. |
| 2 | CATHODE 1 | passive | Cathode of the channel 1 input LED; the LED is on for a logic-high VO1 and the VF(OFF) maximum is 0.8 V. |
| 3 | CATHODE 2 | passive | Cathode of the channel 2 input LED; the LED is on for a logic-high VO2 and the VF(OFF) maximum is 0.8 V. |
| 4 | ANODE 2 | passive | Anode of the channel 2 input LED, driven with IF(ON) of 1.8 mA to 5 mA for HCPL-223X. |
| 5 | GND | power_in | Output-side ground, with a 0.1 µF bypass capacitor required between pins 5 and 8. |
| 6 | VO2 | output | Channel 2 totem-pole output (no pull-up needed), high when LED 2 is on, IOL up to 6.4 mA at VOL max 0.5 V, average output current max 25 mA. |
| 7 | VO1 | output | Channel 1 totem-pole output (no pull-up needed), high when LED 1 is on, IOL up to 6.4 mA at VOL max 0.5 V, average output current max 25 mA. |
| 8 | VCC | power_in | Output-side supply voltage of 4.5 V to 20 V recommended (0 V to 20 V absolute maximum), bypassed with 0.1 µF to pin 5. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Broadcom Limited |
| Package | DIP-8 |
| Category | Optoisolators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage Temperature | TS | -55 | 125 | °C | 11 | ||
| Operating Temperature | TA | -40 | 85 | °C | 11 | ||
| Average Forward Input Current | IF(AVG) | 10 | mA | Each channel | 11 | ||
| Peak Transient Input Current | IF(TRAN) | 1 | A | ≤1 µs pulse width, 300 pps; each channel | 11 | ||
| Reverse Input Voltage | VR | 5 | V | Each channel | 11 | ||
| Average Output Current | IO | 25 | mA | Each channel | 11 | ||
| Supply Voltage | VCC | 0 | 20 | V | 11 | ||
| Output Voltage | VO | -0.5 | 20 | V | Each channel | 11 | |
| Total Package Power Dissipation | PT | 294 | mW | HCPL-223X; derate linearly above 70°C at 4.5 mW/°C | 11 | ||
| Lead Solder Temperature | 260 | °C | 10 s, 1.6 mm below seating plane (through hole) | 11 | |||
| Power Supply Voltage | VCC | 4.5 | 20 | V | 11 | ||
| Forward Input Current (ON) | IF(ON) | 1.8 | 5 | mA | HCPL-223X | 11 | |
| Forward Input Voltage (OFF) | VF(OFF) | 0.8 | V | 11 | |||
| Operating Temperature | TA | -40 | 85 | °C | 11 | ||
| Junction Temperature | TJ | -40 | 125 | °C | 11 | ||
| Fan Out | N | 4 | TTL Loads | 11 | |||
| Logic Low Output Voltage | VOL | 0.5 | V | IOL = 6.4 mA (4 TTL Loads) | 12 | ||
| Logic High Output Voltage | VOH | 2.4 | V | IOH = -2.6 mA | 12 | ||
| Logic High Output Voltage | VOH | 2.7 | V | IOH = -0.4 mA | 12 | ||
| Output Leakage Current | IOHH | 100 | µA | VO = 5.5V; IF = 5 mA | 12 | ||
| Output Leakage Current | IOHH | 500 | µA | VO = 20V; IF = 5 mA | 12 | ||
| Logic Low Supply Current | ICCL | 7.4 | 12 | mA | HCPL-223X; VCC = 5.5V; VF = 0V, IO = Open | 12 | |
| Logic Low Supply Current | ICCL | 8.6 | 14 | mA | HCPL-223X; VCC = 20V; VF = 0V, IO = Open | 12 | |
| Logic High Supply Current | ICCH | 4.8 | 8 | mA | HCPL-223X; VCC = 5.5V; IF = 5 mA, IO = Open | 12 | |
| Logic High Supply Current | ICCH | 5.4 | 10 | mA | HCPL-223X; VCC = 20V; IF = 5 mA, IO = Open | 12 | |
| Logic Low Short Circuit Output Current | IOSL | 15 | mA | VO = VCC = 5.5V; VF = 0V | 12 | ||
| Logic Low Short Circuit Output Current | IOSL | 20 | mA | VO = VCC = 20V; VF = 0V | 12 | ||
| Logic High Short Circuit Output Current | IOSH | -10 | mA | VCC = 5.5V; VO = GND; IF = 5 mA | 12 | ||
| Logic High Short Circuit Output Current | IOSH | -20 | mA | VCC = 20V; VO = GND; IF = 5 mA | 12 | ||
| Input Forward Voltage | VF | 1.5 | 1.7 | V | TA = 25°C; IF = 5 mA | 12 | |
| Input Forward Voltage | VF | 1.85 | V | IF = 5 mA | 12 | ||
| Input Reverse Breakdown Voltage | BVR | 5 | V | IR = 10 µA | 12 | ||
| Input Diode Temperature Coefficient | ΔVF/ΔTA | -1.7 | mV/°C | IF = 5 mA | 12 | ||
| Input Capacitance | CIN | 60 | pF | f = 1 MHz, VF = 0V | 12 | ||
| Propagation Delay Time to Logic Low Output Level | tPHL | 150 | 300 | ns | With Peaking Capacitor | 13 | |
| Propagation Delay Time to Logic Low Output Level | tPHL | 150 | ns | Without Peaking Capacitor | 13 | ||
| Propagation Delay Time to Logic High Output Level | tPLH | 90 | 300 | ns | With Peaking Capacitor | 13 | |
| Propagation Delay Time to Logic High Output Level | tPLH | 110 | ns | Without Peaking Capacitor | 13 | ||
| Output Rise Time (10% to 90%) | tr | 30 | ns | 13 | |||
| Output Fall Time (90% to 10%) | tf | 7 | ns | 13 | |||
| Logic High Common Mode Transient Immunity | /CMH/ | 10000 | V/µs | /VCM/ = 1 kV, IF = 5.0 mA, VCC = 5V, TA = 25°C | 13 | ||
| Logic Low Common Mode Transient Immunity | /CML/ | 10000 | V/µs | /VCM/ = 1 kV, VF = 0V, VCC = 5V, TA = 25°C | 13 | ||
| Input-Output Momentary Withstand Voltage | VISO | 3750 | Vrms | RH < 50%, t = 1 min. | 14 | ||
| Input-Output Capacitance | CI-O | 0.6 | pF | f = 1 MHz | 14 | ||
| Input-Input Insulation Leakage Current | II-I | 0.005 | µA | Relative Humidity = 45%, t = 5s, VI-I = 500V | 14 | ||
| Capacitance (Input-Input) | CI-I | 0.25 | pF | f = 1 MHz | 14 |
CAD (KiCad official)
- Symbol:
HCPL-2232 - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files:
hcpl-2232-etched.step/hcpl-2232-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hcpl-2232.step/hcpl-2232.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Broadcom Limited datasheet (22 pp, sha256
ec95d613662edad2, retrieved 2026-11-02, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).