main
Ray hcpl-2231-300e: CAD wording names the Adom_Gen land, not KiCad official 8aea148

HCPL-2231-300E

Broadcom/AVAGO · Logic Output Optoisolators · DIP-8

HCPL-2231-300E from Broadcom/AVAGO, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 ANODE 1 input Anode of channel 1 input LED; LED on with IF(ON) of 1.8 mA to 5 mA (HCPL-223X) gives VO1 high.
2 CATHODE 1 input Cathode of channel 1 input LED; input forward voltage must be at most 0.8 V (VF(OFF)) for the LED to be off.
3 CATHODE 2 input Cathode of channel 2 input LED; input forward voltage must be at most 0.8 V (VF(OFF)) for the LED to be off.
4 ANODE 2 input Anode of channel 2 input LED; LED on with IF(ON) of 1.8 mA to 5 mA (HCPL-223X) gives VO2 high.
5 GND power_in Output-side ground; connect a 0.1 µF bypass capacitor between pins 5 and 8.
6 VO2 output Channel 2 totem-pole output (no pull-up needed), high when LED on, low when LED off; sinks 6.4 mA at VOL max 0.5 V.
7 VO1 output Channel 1 totem-pole output (no pull-up needed), high when LED on, low when LED off; sinks 6.4 mA at VOL max 0.5 V.
8 VCC power_in Output-side supply voltage, 4.5 V to 20 V recommended; connect a 0.1 µF bypass capacitor between pins 5 and 8.

Key specifications

Parameter Value
Manufacturer Broadcom/AVAGO
Package DIP-8
Category Optoisolators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Logic Low Output Voltage VOL 0.5 V IOL = 6.4 mA (4 TTL Loads) 10
Logic High Output Voltage VOH 2.4 V IOH = -2.6 mA 10
Logic High Output Voltage VOH 2.7 V IOH = -0.4 mA 10
Output Leakage Current IOHH 100 μA VO = 5.5 V, IF = 5 mA 10
Output Leakage Current IOHH 500 μA VO = 20 V, IF = 5 mA 10
Logic Low Supply Current (HCPL-223X) ICCL 7.4 12 mA VCC = 5.5 V, VF = 0 V 10
Logic Low Supply Current (HCPL-223X) ICCL 8.6 14 mA VCC = 20 V, VF = 0 V 10
Logic High Supply Current (HCPL-223X) ICCH 4.8 8 mA VCC = 5.5 V, IF = 5 mA 10
Logic High Supply Current (HCPL-223X) ICCH 5.4 10 mA VCC = 20 V, IF = 5 mA 10
Logic Low Short Circuit Output Current IOSL 15 mA VO = VCC = 5.5 V, VF = 0 V 10
Logic Low Short Circuit Output Current IOSL 20 mA VO = VCC = 20 V, VF = 0 V 10
Logic High Short Circuit Output Current IOSH -10 mA VCC = 5.5 V, IF = 5 mA, VO = GND 10
Logic High Short Circuit Output Current IOSH -20 mA VCC = 20 V, IF = 5 mA, VO = GND 10
Input Forward Voltage VF 1.5 1.7 1.85 V TA = 25°C, IF = 5 mA 10
Input Reverse Breakdown Voltage BVR 5 V IR = 10 μA 10
Input Diode Temperature Coefficient ΔVF/ΔTA -1.7 mV/°C IF = 5 mA 10
Input Capacitance CIN 60 pF f = 1 MHz, VF = 0 V 10
Logic High Common Mode Transient Immunity /CMH/ 1000 V/μs /VCM/ = 50 V, VCC = 5 V, IF = 1.8 mA, TA = 25°C 11
Logic Low Common Mode Transient Immunity /CML/ 1000 V/μs /VCM/ = 50 V, VF = 0 V, VCC = 5 V, TA = 25°C 11
Propagation Delay Time to Logic Low tPHL 150 300 ns With Peaking Capacitor 11
Propagation Delay Time to Logic Low tPHL 150 ns Without Peaking Capacitor 11
Propagation Delay Time to Logic High tPLH 90 300 ns With Peaking Capacitor 11
Propagation Delay Time to Logic High tPLH 110 ns Without Peaking Capacitor 11
Output Rise Time (10-90%) tr 30 ns 11
Output Fall Time (90-10%) tf 7 ns 11
Input-Output Momentary Withstand Voltage VISO 3750 V rms RH < 50%, t = 1 min. 12
Input-Output Capacitance CI-O 0.6 pF f = 1 MHz 12
Input-Input Insulation Leakage Current II-I 0.005 μA Relative Humidity = 45%, t = 5 s, VI-I = 500 V 12
Capacitance (Input-Input) CI-I 0.25 pF f = 1 MHz 12
Storage Temperature TS -55 125 °C 9
Operating Temperature TA -40 85 °C 9
Average Forward Input Current IF(AVG) 10 mA Each channel 9
Peak Transient Input Current IF(TRAN) 1 A ≤ 1 μs Pulse Width, 300 pps 9
Reverse Input Voltage VR 5 V Each channel 9
Average Output Current IO 25 mA Each channel 9
Supply Voltage VCC 0 20 V 9
Output Voltage VO -0.5 20 V Each channel 9
Total Package Power Dissipation (HCPL-223X) PT 294 mW 9
Power Supply Voltage VCC 4.5 20 V 9
Forward Input Current (ON) IF(ON) 1.8 5 mA HCPL-223X 9
Forward Input Voltage (OFF) VF(OFF) 0.8 V 9
Operating Temperature TA -40 85 °C 9
Junction Temperature TJ -40 125 °C 9
Fan Out N 4 TTL Loads 9

CAD (Adom-generated)

  • Symbol: HCPL-2231-300E
  • Footprint: Adom_Gen:Broadcom_AVAGO_HCPL-223_39c9e6
  • 3D model: generated to fit the land (STEP)
  • 3D model files: hcpl-2231-300e-etched.step / hcpl-2231-300e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hcpl-2231-300e.step / hcpl-2231-300e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Broadcom/AVAGO datasheet (16 pp, sha256 2a612efba8d4ea87, retrieved 2026-10-31, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.

Datasheet PDF